Rinnai DDUPS2580N Specifications Sheet

Qty. Description

1 UPS 25-80 N 180

Product No.: 95906439
The pump is of the canned rotor type, i.e. pump
and motor form an integral unit without shaft
seal and with only two gaskets for sealing.
The bearings are lubricatd by the pumped liquid.
The pump has 3-step speed selector.
The pump is characterized by:

* Ceramic shaft and radial bearings.
* Carbon axial bearing.
* Stainless steel rotor can and bearing plate.
* Corrosion-resistant impeller, Composite, PES/PP.
* Stainless steel pump housing.

Company name:
Created by:
Phone:

Date: 18/01/2019

Note! Product picture may differ from actual product

The motor is a 1-phase motor.
No additional motor protection is required.

Liquid:

Pumped liquid: Water
Liquid temperature range: -25 .. 110 °C
Liquid temperature during operation: 60 °C
Density: 983.2 kg/m³

Technical:

TF class: 110

Materials:

Pump housing: Stainless steel

DIN W.-Nr. 1.4301
AISI 304

Impeller: Composite, PES/PP

Installation:

Amb. max at 80 dgr C liquid: 40 °C
Maximum operating pressure: 10 bar
Pipe connection: G 1 1/2
Pressure rating: PN 10
Port-to-port length: 180 mm

Electrical data:

Power input in speed 1: 110 W
Power input in speed 2: 155 W
Max. power input: 165 W
Mains frequency: 50 Hz
Rated voltage: 1 x 230 V

Printed from Grundfos Product Centre [2018.08.004]

1/2

Qty. Description

Current in speed 1: 0.5 A
Current in speed 2: 0.7 A
Current in speed 3: 0.7 A
Capacitor size - run: 4 µF
Enclosure class (IEC 34-5): X2D
Insulation class (IEC 85): F

Others:

Net weight: 4.4 kg
Gross weight: 5.2 kg
Shipping volume: 0.008 m³
Danish VVS No.: 380633100
Swedish RSK No.: 5803099
Finnish LVI No.: 4615614
Norwegian NRF no.: 9042217

Company name:
Created by:
Phone:

Date: 18/01/2019

Printed from Grundfos Product Centre [2018.08.004]

2/2