Rinnai DDUPS2060N Specifications Sheet

Qty. Description

1 UPS 20-60 N 150

Product No.: 96913096
The pump is of the canned rotor type, i.e. pump
and motor form an integral unit without shaft
seal and with only two gaskets for sealing.
The bearings are lubricatd by the pumped liquid.
The pump has 3-step speed selector.
The pump is characterized by:

* Ceramic shaft and radial bearings.
* Carbon axial bearing.
* Stainless steel rotor can and bearing plate.
* Corrosion-resistant impeller, Composite, PES/PP.
* Stainless steel pump housing.

Company name:
Created by:
Phone:

Date: 18/01/2019

Note! Product picture may differ from actual product

The motor is a 1-phase motor.
No additional motor protection is required.

Liquid:

Pumped liquid: Water
Liquid temperature range: 2 .. 110 °C
Liquid temperature during operation: 60 °C
Density: 983.2 kg/m³

Technical:

TF class: 110
Approvals on nameplate: CE,EAC,WEEE

Materials:

Pump housing: Stainless steel

DIN W.-Nr. 1.4301

Impeller: Composite, PES/PP

Installation:

Amb. max at 80 dgr C liquid: 80 °C
Maximum operating pressure: 10 bar
Pipe connection: G 1 1/4
Pressure rating: PN 10
Port-to-port length: 150 mm

Electrical data:

Power input in speed 1: 35 W
Power input in speed 2: 60 W
Max. power input: 90 W
Mains frequency: 50 Hz
Rated voltage: 1 x 240 V

Printed from Grundfos Product Centre [2018.08.004]

1/2

Qty. Description

Current in speed 1: 0.15 A
Current in speed 2: 0.25 A
Current in speed 3: 0.37 A
Capacitor size - run: 2 µF
Enclosure class (IEC 34-5): IP44
Insulation class (IEC 85): H

Others:

Net weight: 2.8 kg
Gross weight: 3 kg
Shipping volume: 0.004 m³

Company name:
Created by:
Phone:

Date: 18/01/2019

Printed from Grundfos Product Centre [2018.08.004]

2/2