Rinnai Blaze 21, Dynamo 15, Enduro 13 Operation Manual
This appliance shall be installed in accordance with:
• Manufacturer’s Installation Instructions
• Local Regulations and Municipal Building Codes
This appliance must be serviced and repaired by an Authorised Person.
This appliance shall be installed in accordance with:
• Manufacturer’s Installation Instructions
• Local Regulations and Municipal Building Codes
This appliance must be serviced and repaired by an Authorised Person.
All Rinnai gas products
are A.G.A. certified.
Portable Unflued Gas
Convection Heater
Operation Manual
To Suit Models
Avenger 25
Blaze 21
Dynamo 15
Enduro 13
TABLE OF CONTENTS
REGULATORY INFORMATION.............................................................................................. ii
WARRANTY ............................................................................................................................ ii
ABOUT YOUR PORTABLE CONVECTOR HEATER............................................................. 1
GENERAL DESIGN LAYOUT ............................................................................................................ 1
NAVIGATING THE CONTROL PANEL ............................................................................................. 2
NAVIGATING THE REMOTE CONTROL .......................................................................................... 3
FEATURES .............................................................................................................................. 4
IMPORTANT POINTS.............................................................................................................. 5
INSTALLATION ....................................................................................................................... 7
UNPACKING THE APPLIANCE ........................................................................................................ 7
WHAT’S IN THE BOX ........................................................................................................................ 7
BEFORE INSTALLING THE APPLIANCE ......................................................................................... 7
CHECKING ROOM SIZE ................................................................................................................... 8
VENTILATION ................................................................................................................................... 8
GAS CONNECTION .......................................................................................................................... 8
HOW TO OPERATE THE HEATER ........................................................................................ 9
TO TURN THE HEATER ON ............................................................................................................. 9
TO ADJUST SET TEMPERATURE ................................................................................................... 9
TO TURN THE HEATER OFF ......................................................................................................... 10
USING THE ECONOMY MODE ...................................................................................................... 10
TIMER OPERATION - AVENGER, BLAZE & DYNAMO ...................................................... 11
CLOCK AND DUAL TIMERS ........................................................................................................... 11
CHECKING THE CLOCK ................................................................................................................ 11
SETTING THE CLOCK .................................................................................................................... 11
PROGRAMMING TIMER 1 .............................................................................................................. 11
PROGRAMMING TIMER 2 .............................................................................................................. 12
OPERATING TIMERS ..................................................................................................................... 12
PREHEAT ........................................................................................................................................ 13
USING THE OVERRIDE FUNCTION .............................................................................................. 13
TIMER OPERATION - ENDURO ........................................................................................... 14
OPERATING THE ON TIMER ......................................................................................................... 14
OPERATING THE OFF TIM
ER ....................................................................................................... 14
LOCK AND SAFETY DEVICES ............................................................................................ 15
USING THE LOCK FUNCTION ....................................................................................................... 15
SAFETY DEVICES .......................................................................................................................... 15
CARE AND MAINTENANCE................................................................................................. 16
AIR FILTERS ................................................................................................................................... 16
REMOVING FILTERS ...................................................................................................................... 16
SERVICE ......................................................................................................................................... 16
TROUBLE SHOOTING CHECKLIST ............................................................................................... 17
ERROR CODES .............................................................................................................................. 17
SPECIFICATIONS .................................................................................................................18
GENERAL SPECIFICATIONS ......................................................................................................... 18
WEIGHT AND MEASURES ............................................................................................................. 18
CONTACT INFORMATION ................................................................................................... 21
Operation Manual Rinnai i
REGULATORY INFORMATION
This Appliance must be installed correctly by an authorised person. The installation of gas and electricity
must conform to local regulations.
The installation must also comply with the instructions supplied by Rinnai.
Your Rinnai Convector space heater has been certified by the Australian Gas Association. The A.G.A.
Certification Number is shown on Data plate.
Please keep this instruction booklet in a safe place for future reference.
WARRANTY
RINNAI BRINGS YOU PEACE OF MIND WITH A 2 YEAR MINIMUM WARRANTY
Rinnai Two Year Warranty - Terms and Conditions
1. During the 24 month period from date of purchase and subject to clauses 2 and 3 below, Rinnai
New Zealand Limited ("Rinnai") will, at its own discretion, either replace or repair any defective
product at no charge to the customer.
2. This warranty covers manufacturing defects only. This warranty will not apply if (for example) the
product has been improperly installed or is otherwise installed contrary to manufacturer's recommendations, has been damaged during or after installation, has not been operated in accordance
with operating instructions, or has been subjected to damage or abuse beyond that expected from
conditions of normal use.
3. Warranty claims may be invalid if not accompanied by details of the installing or supervising gas
fitter's registration number and the gas fitting certification number.
4.This warranty commences from the date of purchase. Proof of purchase is required at the time of
any warranty claim.
5. Servicing of the product is to be carried out by a Rinnai authorised service centre.
All Rinnai appliances meet or exceed the safety standards required by New Zealand gas and electrical regulations. Rinnai is constantly improving its products and as such specifications are subject to
change or variation without notice.
For future reference please take a moment to complete the following information:
Your Retailer:
Name:
Installation Address:
Telephone No.
Date of Purchase: / /
Rinnai Operation Manualii
ABOUT YOUR PORTABLE CONVECTOR HEATER
GENERAL DESIGN LAYOUT
Control panel
ON / OFF button
Stops and operates the heater.
Remote control receiver window
Louvre, warm air discharge
Carry handle(s)
Gas inlet connection
Filter 1
Filter 2
Thermistor
240v power cord
Power cord tidy
2
5
1
5
7
3
4
6
8
9
11
10
2
5
1
7
4
6
8
9
11
10
AVENGER
BLAZE
ENDURO
5
1
7
4
6
8
9
11
10
DYNAMO
3
2
1
2
3
4
5
6
7
8
9
10
11
Operation Manual Rinnai 1
ABOUT YOUR PORTABLE CONVECTOR HEATER
NAVIGATING THE CONTROL PANEL
On / Combustion indicator
When GREEN appliance is in standby, when
RED the burner is operating and when
flashing RED there is a fault.
Up and Down buttons
Used to adjust set temperature, clock / timer
settings and to operate the Lock function.
AM / PM indicators
Indicates AM / PM of clock / timers.
Digital (Set) display
Displays set temperature and hour digits for
clock / timers.
Hour / Minute delineators
Delineates hours / minutes of clock / timers.
Digital (Room) display
Displays current room temperature, minute
digits for clock / timers and error
codes.
Set Times Button
Sets heater to adjust clock / timer functions.
Clock set indicator
Indicates heater is in clock setting mode.
Timer set indicators
Indicates heater is in timer setting mode.
Timer 1 button
Operates Timer programme 1.
Timer 1 indicator
Indicates Timer 1 is in operation.
Timer 2 button
Operates Timer programme 2.
Timer 2 indicator
Indicates Timer 2 is in operation.
Override button
Operates the manual Override function.
Override indicator
Indicates the Override function is in operation.
Economy button
Operates the Economy mode.
Economy indicator
Indicates Economy function is in operation.
Lock indicator
Indicates th
e Lock function is activated.
Filter indicator
Indicates that there is a filter blockage.
Digital (Temp / Time) display
Displays current room temperature (default),
set temperature, Delay On Timer settings and
error codes.
Digital Display Set Temp Indicator
Indicates that the Digital (Temp / Time) display
is in the temperature setting mode.
Digital Display Room Temp indicator
Indicates that the Digital (Temp / Time) display
is in room temperature mode.
Digital Display Delay On Timer indicator
Indicates that the Digital (Temp / Time) display
is in the timer setting
mode.
On Timer button
Sets and or operates the Delay On Timer.
On Timer indicator
Indicates heater is in Delay On Timer mode.
Off timer button
Operates the Off Timer (60 minutes).
Off timer indicator
Indicates heater is in Off Timer mode.
12
192628 2422 30 29
20
18
1715
1625
14
23
21
27
13
2
12
28 36 3238 30 29
33
31
34
35
37
27
13
2
Avenger Blaze Dynamo
Enduro
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
31
33
31
34
31
35
36
37
38
Rinnai Operation Manual2
ABOUT YOUR PORTABLE CONVECTOR HEATER
NAVIGATING THE REMOTE CONTROL
ON button
Operates the heater.
OFF button
Stops the heater.
Up and Down buttons
Used to raise or lower the set temperature.
Infra red transmitter
Transmits signal to heater.
Battery
The remote control is powered by one CR2032 3V
battery. To replace the battery simply slide open the
battery cradle cover located on the back of the remote
control. When installing a new battery ensure that the
correct polarity (positive uppermost) is observed.
ONLY use the specified CR2032 3V battery for the remote control
The remote control will not function if the heater is in Timer mode.
If the heater is operating in Override mode, using the STANDBY button will cancel
any future timer operations, these will have to be reset manually.
Some fluorescent lights may interfere with the transmission of remote control
signals, in this case changing the position from which you are operating the remote
control may help.
Avoid leaving the remote control in direct sunlight and do not place the remote
control
close to the louvres of the heater.
Avoid getting the remote control wet, or dropping it.
FRONT
REAR
C R 2 03 2
OPEN
ON
OFF
41
42
43
39
40
39
40
41
42
43
IMPORTANT
Operation Manual Rinnai 3
FEATURES
FEATURES COMMON TO ALL MODELS
PUSH BUTTON IGNITION Only one touch of the ON/OFF button is required to operate the heater.
CHILD LOCK
FILTER INDICATOR
When the fan filters become covered with dust, the filter indicator will
flash. The filters should be vacuumed at regular intervals to optimise
heating effectiveness.
ECONOMY FUNCTION The Economy (ECON) function is an energy saving feature designed
to control the room temperature and prevent discomfort from
overheating.
FEATURES OF AVENGER, BLAZE AND DYNAMO HEATER MODELS
REMOTE CONTROL For the convenience of operating the heater between STANDBY or
ON, as well as adjusting the temperature up or down while at a short
distance from the heater.
PRE-HEAT This function will automatically operate the appliance before the
programmed start time of the Timer, in order to heat a room to the
pre-set temperature by the programmed start time.
MEMORY The micro-computer records selected preset temperatures, the times
programm
ed into Timers as well as operating the Economy and Pre-
heat modes, to maintain comfort levels.
DUAL TIMERS The Dual Timers allows you to program the appliance to come on for
two separate periods each day, one period in the morning and one
period in the evening. The built in Pre-heat Mode brings the room
temperature to the temperature you have selected, by the time
programmed into the Timer.
The Dual Timer feature means that you can "Set and Forget" your
heater. It will turn itself ON or to STANDBY at the times you have
programmed until you cancel the Timer program.
FEATURES OF THE ENDURO HEATER MODEL
MEMORY The micro-computer records selected preset temperatures, the time
programmed into the On Timer as well as operating the Economy
modes, to maintain comfort levels.
DELAY ON TIMER The On Timer allows you to program the heater to come on after a
delayed period. This is a particularly useful feature to use overnight
for automatic heating in the morning.
The appliance begins heating a room once it has reached the end of
the delay period selected.
OFF TIMER This feature allows you to program the
heater to operate for a period
of one hour before it automatically turns off.
When the Child Lock is activated all controls other than the
ON/OFF button will be locked. Deactivating the lock releases the
controls. If the lock is activated when the appliance is in
STANDBY, all functions will be locked.
The heater will automatically come on and will continue to operate
for a period of 60 minutes then automatically turn off.
Rinnai Operation Manual4
IMPORTANT POINTS
The appliance is not intended for use by young children or infirm persons without supervision.
Young children should always be supervised to ensure that they DO NOT play with the appliance.
DO NOT allow children or elderly persons to sleep in the warm air discharge from the heater.
DO NOT sit on this heater.
DO NOT post or allow children to post articles into the louvres of the heater.
DO NOT cover or place articles on this heater.
DO NOT place articles in front of the louvres.
DO NOT operate / install this heater in areas where painting is taking place, or in places such as
ha
irdressing salons, where there may be fluff and dust, and where aerosols are used.
Keep heater away from flammable materials. Combustible materials must not be placed where the
heater could ignite them.
DO NOT spray aerosols near this heater while it is in use. Most aerosols contain butane gas which can
be a fire hazard if used near this heater when it is in use.
Use of aerosols, paint, polishes etc. whilst this heater is in use may also cause unpleasant smells.
Operation Manual Rinnai 5
Loading...