Rinnai AV25SN3 Installation and Operation Manual
AVENGER 25TRE
A
A
CAPELLA 18TRE
Unflued Room Heater
Customer Operation & Installation Manual
S
E
T
O
N
/
O
F
F
This appliance shall be installed in accordance with:
Manufacturer’s Installation Instructions
Local Gas Fitting Regulations
Municipal Building Codes
AG601/AS5601-2000 Gas Installations, AS/NZS 3000 Wiring Rules
Any other relevant Statutory Regulation
This appliance must be installed, serviced and removed by an Authorised Person
Proudly a member of the AGA
ll of our gas products are AG
tested and approved.
RINNAI GUARANTEE OF QUALITY
As a purchaser of a high quality Rinnai product, we provide you with the following guarantee
on your new Portable Convector Space Heater.
Free Labour Period Free Parts Period
FANS
COMBUSTION CHAMBER
ALL Other parts
* Combustion chamber full replacement parts costs in the first 5 years, reducing 20% per year thereafter.
The benefits conferred by this guarantee are in addition to all other rights and remedies in
respect of the product which you have under the Trade Practices Act and other State and
Territory Laws.
The appliance must be installed correctly, and the installation must conform to all local
regulations.
The installation must also comply with the instructions supplied by Rinnai.
The appliance must be serviced by an authorised person.
No Parts or functions should be modified or permanently removed from the heater.
Please note: General cleaning, maintenance and wear and tear are not necessarily
covered by guarantee. Calls of this nature may be chargeable.
5 Years 5 Years
5 Years 10 Years Pro-Rata*
5 Years 5 Years
Your Rinnai Portable Space Heater has been approved by the Australian Gas Association, the
AGA Approval Number is located on the data plate of the appliance.
Please keep these instructions in a safe place for future reference.
PLEASE RECORD BELOW:
Your Retailer:
NAME:
ADDRESS:
TELEPHONE:
Date of Purchase:
/ /
Rinnai Australia i RCE-470/670 TRE
TABLE OF CONTENTS
RINNAI GUARANTEE OF QUALITY ...........................................................................i
ABOUT YOUR NEW AVENGER/CAPELLA TRE.......................................................1
CONTROL PANEL LAYOUT ......................................................................................2
REMOTE CONTROL...................................................................................................3
FEATURES..................................................................................................................4
IMPORTANT POINTS .................................................................................................5
CUSTOMER OPERATING INSTRUCTIONS
HOW TO OPERATE THE HEATER..................................................................10
ADJUSTING TEMPERATURES........................................................................11
HEATER MODES & FUNCTIONS.....................................................................12
SETTING HEATER MODES .............................................................................13
SETTING CLOCK..............................................................................................14
PROGRAMMING THE ON/OFF TIMERS .........................................................15
OPERATING THE ON/OFF TIMERS................................................................16
PRE-HEAT.........................................................................................................16
OVERIDE FUNCTION.......................................................................................17
USING THE REMOTE CONTROL....................................................................17
CHILD LOCK.....................................................................................................18
SAFETY DEVICES . ...................................................................................................18
CARE OF HEATER ...................................................................................................19
FAULT FINDING........................................................................................................20
ERROR CODES ........................................................................................................21
SPECIFICATIONS.....................................................................................................22
CUSTOMER CONTACTS..........................................................................................25
Rinnai Australia ii RCE-470/670 TRE
ABOUT YOUR NEW AVENGER/CAPELLA TRE
Rinnai Australia 1 RCE-470/670 TRE
CONTROL PANEL LAYOUT
Rinnai Australia 2 RCE-470/670 TRE
REMOTE CONTROL
Rinnai Australia 3 RCE-470/670 TRE
FEATURES
PUSH BUTTON IGNITION Only one touch of the STANDBY/ON switch is required
to operate the heater.
CHILD LOCK When the Child Lock is activated all controls other than
the STANDBY/ON switch will be locked. Deactivating the
lock releases the controls. If the lock is activated when
the appliance is in STANDBY, all functions will be
locked.
MEMORY The micro-computer records selected preset
temperatures, the times programmed into Timers as well
as operating the Economy/Auto-Off and Pre-heat
modes, to maintain comfort levels.
PRE-HEAT This function will automatically operate the appliance
before the programmed start time of the Timer, in order
to heat a room to the pre-set temperature by the
programmed time.
FILTER INDICATOR When the fan filters become covered with dust, the filter
indicator will flash. The filters should be vacuumed at
regular intervals to avoid unnecessary strain on the
appliance.
REMOTE CONTROL For the convenience of operating the heater between
STANDBY or ON, as well as adjusting the temperature
up or down while at a short distance from the heater.
DUAL WEEKDAY / WEEKEND
TIMER
The Dual WEEKDAY/WEEKEND Timer allows you to
program the appliance to come on for two separate
periods each day, one period in the morning and one
period in the evening, on separate WEEKDAY and
WEEKEND timers. The built in Pre-heat Mode brings the
room temperature to the temperature you have selected,
by the time programmed into the Timer.
The Dual Timer feature means that you can "Set and
Forget" your heater. It will turn itself ON or to STANDBY
at the times you have programmed until you cancel the
Timer program.
ECONOMY FUNCTION The Economy (ECON) function is an energy saving
features designed to control the room temperature and
prevent discomfort from overheating.
Rinnai Australia 4 RCE-470/670 TRE
IMPORTANT POINTS
Unpacking Appliance:
Check for damage. If the heater is damaged, contact your supplier for advice. Before installing the
appliance, check it is labelled for the correct gas type (see label on rear of heater). Refer to local gas
authority for confirmation of gas type if you are in doubt. The following items should also be included in
the carton: Customers Operation Information, Remote Control, Remote Control Caddy and Batteries.
IMPORTANT
1. The appliance must be installed in accordance with the local gas and electrical authority
regulations.
2. A dedicated 240 V Earthed 10 Amp power point must be used with this appliance.
3. For information on gas consumption, see data plate on the appliance.
4. When using this appliance, ensure that the room is correctly ventilated. Check AG601/AS5601
(Gas Installations) or the local gas authority for information on ventilation requirements, or refer
to the warning label located on the appliance.
5. DO NOT connect this appliance to the gas supply to heat a bedroom. It may be connected
to the electric supply for heating a bedroom in ‘ELECTRIC’ mode only.
6. DO NOT use this heater in the immediate surroundings of a bath, shower, swimming pool,
toilet or sauna. The appliance must not be used to heat any of these areas.
7. DO NOT connect to an LPG Gas cylinder indoors.
8. This appliance must not be installed where curtains or other combustible materials could come
into contact with it. In some cases curtains may need restraining.
9. This appliance is not designed to be built in.
10. Heater must not be located below a power
50mm
socket-outlet.
11. If you move house, check the gas type in
S
E
T
O
N
/
O
F
F
50mm
the area where you are moving to.
12. The local gas and electrical authorities will
be able to advise on local regulations.
13. Heat emanating from the front of this
50mm
50mm
appliance may over time affect the
appeara
flooring such as
This effect may be amplified if the air in the
room contains cooking vapours or cigarette
smoke. To avoid this possibility, it is
nce of some materials used for
carpet, vinyl, cork or timber.
750mm
The above diagram shows the clearances required
around this heater whilst in operation.
recommended that a mat be placed in front
of this appliance, extending at least 750 mm in front of it.
14. The appliance is not intended for use by young children or infirm persons without supervision.
15. Young children should be supervised to ensure they do not play with the appliance.
16. If the supply cord or gas hose are damaged or require replacing, they must be replaced by the
manufacturer or the manufacturer's agent or similarly qualified person in o rder to avoid a h azard.
17. The appliance weighs 17.5 kg, exercise caution when lifting or moving.
Rinnai Australia 5 RCE-470/670 TRE
IMPORTANT POINTS
Do not allow children to post articles in the
louvres.
The appliance is not intended for use by
young children or infirm persons without
supervision.
Young children should be supervised to
ensure they DO NOT play with the appliance.
Do not allow children or elderly persons to
sleep in the warm air discharge from the
heater.
E
S
T
O
N
/
O
F
F
S
E
T
O
N
/
O
F
F
S
E
T
O
N
/
O
F
F
Do not cover or place articles on this heater.
Vent ilate the room when this h eater is in use.
Correct, fixed ventilation is usually sufficient,
consult your local gas authority for local
regulations.
Refer to the minimum room size
requirements as shown on the appliance
warning label.
Rinnai Australia 6 RCE-470/670 TRE
Loading...