Rimoldi 054-00-01, 054-00-06, 054-00-10, 054-04-02 Manual

Rimoldi®

cATALoGo pezz1 o1 RlcAMslo Rim® Rim® sPARe PARTs cATALoGuE cATALoGuE RecHANGes Rim®

054-00-01

054-00-06

054-00-10

054-04-02

n.21

652590050

EDIZIONEEDITION 10/75

From the library of Superior Sewing Machine & Supply LLC - www.supsew.com

II presente Catalogo Pezzi di Ricambio e costituito da due parti: Ia prima, definita come "Catalogo base" (da Tav. 1 a Tav.13 ), comprende i particolari montati sulla testa piu significativa (Ia prima dell'elencoin copertina); Ia seconda (da Tav.14 in avanti) comprende tutti i particolari delle altre teste basi o derivate, che differiscono da quella del Catalogo base.

Le Teste basi sono elencate in copertina con un carattere piu grande rispetto a quello delle derivate.

Nella consultazione del Catalogo tenere presente che:

1.Tutti i particolari non fornibili sciolti non vengono richiamati singolarmente, ma soltanto illustrati nel gruppo d'appartenenza.

2.I riferimenti delle figure dei particolari che compongono il gruppo sono di norma

raggruppati in una parentesi. In alcuni casi pero, dove none possibile il raggruppamento, i numeri che nelle tavole illustrative richiamano i singoli pezzi sono affiancati dallo stesso segno particolare, con cui e indicate l'interogr'uppo.

3.Sulle tavole relative aile altre teste (da Tav. 14 in avanti) sono elencati tutti i particolari diversi o non montati sulle teste del Catalogo Base.

Dette tavole portano in alto a destra il simbolo della testa cui si riferiscono.

I disegni di questa gruppo di tavole illustrano soltanto i pezzi nuovi o sostanzialmente diversi rispetto a quelli montati sulla testa piu significativa del Catalogo.

I particolari richiamati come simbolo, ma non illustrati, conservano lo stesso numero di figura dei corrispondenti raffigurati sui Catalogo base.

I particolari comuni a tutte le teste comprese nel Catalogo, vengono richiamati soltanto nel prima gruppo di tavole e cioe da Tav. 1 a Tav.13 .

I particolari definiti come "pezzi annullati" si intendono quelli non montati sulla testa a cui Ia tavola si riferisce. Nel caso di un gruppo annullato, viene indicate soltanto il simbolo del gruppo, ma devono intendersi annullati anche tutti i particolari componenti il gruppo stesso.

Per facilitare Ia ricerca viene riportato l'indicenumerico di tutti i particolari illustrati sui Catalogo base, con Ia relativa tavola in cui gli stessi sono richiamati.

AGHI

Gli aghi sono contraddistinti dal sistema e dalla finezza, Ia quale indica il diametro media espresso in centesimi di millimetre.

II sistema dell'agoe Ia finezza sono marcati oltre che sulla busta, anche sull'agostesso.

Nelle ordinazioni precisare, oltre il simbolo, il sistema e Ia finezza degli aghi desiderati. In caso di dubbio, allegare, un ago campione o una bustina vuota.

AVVERTENZA

Nella richiesta di parti di ricambio citare sempre il relative numero di matricola della macchina, il simbolo del particolare e Ia denominazione ufficiale usata sui catalogo.

This spare parts catalogue is made up of two parts: in the first one, called "basic catalogue" (from Table 1 to Table13 ), all the details of most representative head are listed (the first head listed on the cover); the second one (from Table 14 onwards) includes the details of the other main heads or derived ones, which are different from that of the basic catalogue. The main heads are listed on the cover in bigger lettering to distinguish them from the derived heads.

When you consult the catalogue will you please note that:

1.all parts which cannot be supplied by themselves are not indicated alone, but shown together with the group to which they belong;

2.the references of the pictures of the parts making up the group are usually put in brackets.

In some cases, however, when their groupingis not possible, the numbers of the various

parts in the tables are marked with the same particular sign with which the whole group is indicated.

3.In the tables of the other heads (from Table14 onward) there are listed all the parts not fitted on the heads in the basic catalogue.

These tables are marked at the top right-hand corner with the symbol of the head which the table refers to.

The drawings in this group of tables show only the parts which are new or basically different from those fitted on the most representative head in the catalogue.

The parts which are represented only by the symbol but not illustrated keep the same figure number as the corresponding parts shown in the basic catalogue.

The parts which are common to all the heads in the catalogue are listed only in the first group of tables, that is from Table 1 to Table 13 .

Parts marked "annulled part" are those not fitted on the head which the table refers to. When an assembly has been annulled only the assembly symbol is specified, but all the parts forming the assembly must also be considered annulled.

To make it easier to locate the parts, the reference numbers of all of those shown in the basic catalogue are listed together with the number of the table in which they are to be found.

NEEDLES

The needles are marked with system and size; the size indicates the average diameter in hundredths of a miII imeter.

The system and size of the needle are shown on the packet as well as on the needle itself. Wheen ordering please state symbol, system and size. If you have doubts, enclose a sample needle or an empty packet with your order.

ATTENTION

When ordering spare parts always state the serial number of the machine, the symbol of the part in question and the description given in the catalogue.

From the library of Superior Sewing Machine & Supply LLC - www.supsew.com

SOMMARIO SUMMARY

TAV. N.		DESCRIZIONE	DESCRIPTION
TAB. N.

1

VOLANT I NO

PULLEY

2

MOVIMENTO BARRA AGO

NEEDLE BAR CONTROL

3

MOVIMENTO CROCHET CENTRALE

CENTRAL LOOPER CONTROL

4

MOVIMENTO CROCHET LATERALE

SIDE LOOPER CONTROL

5

GRUPPO TRASPORTO INFER. E FRIZIONE

LOWER TRANSPORT AND CLUTCH

6

MOVIMENTO TRASPORTO SUPER lORE

UPPER TRANSPORT

7

GRUPPO TENSION!

TENSIONS ASSEMBLY

8

BACINELLA E COPERCHI

SUMP AND COVERS

9

GRUPPO LUBRIFICAZIONE

LUBR !CATION ASSEMBLY

1 --

10

ACCESSOR! IN DOTAZIONE

AUXILIARY EQUIPMENT

11

GUIDA A RICHIESTA

GUIDE ON REQUEST

12

GUIDA A RICHIESTA E GINOCCHIELLO

GUIDE ON REQUEST AND KNEE-PRESS

13

PORTA BOBINE

BOBBIN CARRIER

14

TEST A 054-00-06

054-00-06 HEAD

15

TESTA 054-00-10

05400-10 HEAD

054-04-02 HEAD

16

TEST A 054-04-02

f ---·

--

--

--

-

1 ---- ·

f ---·

f--.

1--·

From the library of Superior Sewing Machine & Supply LLC - www.supsew.com

Q;

.~

z

z

~

..;

CD·-

~

"'

x E

~

"'

~

CARATTERISTICHE TESTE

~

0

E ~

CARATTERISTICHE TESTA

:c

;

·- -o

0

q ...:

q ...:

· -

Q

·- (l.

MACHINE HEAD FEATURES

.~!

MACHINE HEAD FEATURES

.t~

i ~

.~!

"'~

.

Ql

• .t:

"'~

0

·-

z z

z 1-

0

·-

tl.O

(l . 0

054-00-01

2/3

2

3550

25+6

Per Ia confezione di maglieria intima diminuita.

A richiesta pu6 essere preparata per lavorare a 3 fili.

For. the making-up of fully-fashioned knit underwear.

On request it can be supplied to work with 3 threads.

054-00-06

2/3

3

3600

17+5

Per maglieria esterna pesantissima. Come Ia 054-00-05

macon piattelli a dentatura grossa.

For extra heavy knit outerwear. Same as 054-00-05, but

with coarse teeth feed cups.

054-00-10

3

5

3600

17+5

Per trapunte piumini ed imbottiture in genera.

For quilts, cushions and paddings in general.

054-04-02

3550

12+2,3

Per imbastitura di maglieria esterna diminuita in genere,

prima dell'operazionedi prestiratura.

Lunghezza punto fino a 11 mm.

For basting fully fashioned knit outerwear in general

prior initial pressing. Stitch length up to 11 mm.

From the library of Superior Sewing Machine & Supply LLC - www.supsew.com

																	INDICE NUMERICO				INDEX
Part. N.			Tav. N.		Part. N.		Tav. N.	Part. N.		Tav. N.	Part. N.		Tav. N.	Part. N.	Tav N.	Part. N.	Tav N.		Part. N.		Tav. N.
100310-2-10		3			100400-0-1 0		3	100537-0-1 0		11-12	101070-0-10	7		101125-0-10	5	704009-4-00	10		741099-2-00		8
																			741145-0-00		5
100313-2-10		3			100402-0-1 0		2-3-5	100539-2-10		11-12	101071-0-10	3		101126-0-10	5	704306-0-00	12
100314-3-10		3			100403-0-1 0		3	100541-0-10		11-12	101 072-0-1 0	3		101127-0-10	5	704333-0-00	8		741156-2-00		7
100315-0-10		3			100407-0-1 0			100542-0-1 0		11-12	101 073-4-00	3		101128-0-10	6	705839-0-00	4		741642-2-00		7
							5
100316-0-10		5			100409-0-1 0		3	100543-0-1 0		11-12	101076-0-10	3		101129-0-10	6	707063-0-00	6		741655-0-00		7
100317-4-10		5			100410-0-10		3	100544-0-1 0		11-12	101077-2-10	8		101130-2-10	6	720464-4-00	10		741732-2-00		2
100318-0-10		5			1004 11 -3-1 0		3	100545-0-1 0		11-12	101080-0-10	7		101132-0-10	3	720505-4-00	10		741741-0-00		5
100319-3-10		5			100414-0-1 0		5	100549-4-10		11	101083-0-10	7		101133-3-10	3	720545-4-00	10		741745-2-00		3
100320-0-10		5			10041 5-0-1 0		3	100550-0-1 0		11	101084-0-10	7		10 11 34-4-1 0	3	721411-0-00	3		741757-0-00		3
100321-0-1 0		5			10041 6-0-1 0		3	100551-0-10		11-12	101085-0-10	8		101135-0-10	3	721433-2-00	2-11-12		741956-2-00		7
100322-0-1 0		5			100417-0-10		4-5	100552-0-10		11	101086-0-10	7		101136-3-10	3	721444-2-00	7-9		741963-0-00		3
100323-0-10		5			100418-0-10		3	100553-0-1 0		11-12	101 087-0-10	7		101137-4-10	3	721464-2-00	2-12		742023-0-00		5
100324-0-10		5			100420-0-1 0		7	100554-0-1 0		11	101088-0-10	4		101138-0-10	4	721474-2-00	1		742430-2-00		3
100325-0-10		5			100421-0-1 0		7	100557-0-10		7	101 089-0-10	6		101139-0-10	4	721475-2-00	12		742811-0-00		2-5
100326-0-1 0		5			100423-2-10		3	100570-0-10		7	101090-0-10	6		101140-3-1 0	4	721484-2-00	7		742932-0-00		4
100329-0-1 0		5			100424-3-1 0		3	100579-4-1 0		11	101091-0-10	6		101141-4-10	4	721485-2-00	4-6-11		743035-0-00		11-12
																721486-2-00	5-8		743066-0-00		11-12
100330-0-1 0		5			100426-2-00		3	100581-3-10		11-12	101 092-0-10	2		101545-0-10	2
100337-0-10		6			100427-3-10		4	100584-4-1 0		11	101 093-0-10	8		200003-0-1 0	8	722431-2-00	13		743251-2-00		3-4-5
100338-0-1 0		6			100428-0-1 0		3	100588-3-10		11-12	101 095-0-1 0	5		200022-0-10	1-4	724053-2-00	11-12		743450-2-00		2
100339-0-1 0		6			100430-0-1 0		2	100600-5-1 0		12	101096-4-10	5		20007 4-0-1 0	7	724462-2-00	6		743471-2-00		3
100340-0-1 0		6			100431-0-10		2	100601-4-10		12	101 097-0-1 0	3		200154-0-1 0	2	724877-2-00	9		743482-2-00		3-4-5
100344-0-1 0		5			100432-0-10		2	100602-0-10		12	101098-0-10	7		200698-0-1 0	7	727012-0-00	3-5		74394 1-0-00		11-12
100346-2-10		3			100437-2-10		5	100603-0-1 0		12	101 099-0-10	7		200699-0-1 0	7	727026-0-00	2-3		744074-0-00		11-12
100347-3-10		3			100439-0-1 0		5	100604-0-10		12	101100-0-10	6		200712-0-10	7	727046-0-00	6		744611-2-00		5
100349-0-1 0		2-3-5			100440-0-1 0		5	100605-0-1 0		12	101101-2-10	3-4		200713-0-1 0	7	727056-0-00	6		744633-0-00		5
100350-2-1 0		5			100441-0-10			100606-0-10		12	101102-4-10	3		20071 5-0-1 0	7	727296-0-00	5		745014-2-00		3
							5
100351 -3-1 0		5			100443-0-1 0		3	100607-0-10		12	101103-4-10	5		200716-0-10	7	727614-0-00	5-6		745317-0-00		3-4
100354-2-10			2		100446-0-1 0		2	100608-0-1 0		12	101105-2-10	9		200821 -0-1 0	7	727854-2-00	1		745332-0-00		6
100357-3-10			5			100447 - 0 - 10	4	100609-0-10		12	1011 06-4-1 0	9		200863-0-10	9	728035-2-00	6		745537-0-00		3-5
100362-0-10			2-3-4-5		100454-0-1 0		7	10061 0-4-1 0		12	101107-0-10	2		200864-0-1 0	9	729034-2-00	13		745554-0-00		5
																729054-2-00	13		745773-2-00		6
100369-0-1 0			8		100500-0-1 0		9	100611-4-1 0		12	101108-0-10	1		200865-0-10	9
10037 5-0-1 0			2			100501 - 0 - 10	9	100619-0-1 0		3	101109-0-10	1		201009-0-10	7	731107-0-00	13		745812-2-00		7
100379-0-1 0			2		100502-0-1 0		9	100620-0-10		3	101110-0-10	1		202165-0-1 0	8	731295-0-00	8-9-12		746007-2-00		7
100380-0-1 0			2		100503-0-1 0		9	100636-0-1 0		12	101111-0-10	1		300416-0-1 0	9	733508-4-00	10-13		746021-2-00		6-11-12
100381-0-10			2		100504-0-1 0		9	100637-0-10		12	101116-2-10	6		30091 7-0-1 0	8	733510-4-00	10		746204-0-00		5
100383-0-1 0			6		100505-0-1 0		9	101061-0-10		8	101118-0-10	3		700131-0-00	1	733605-0-00	12		746409-2-00		12
																					10
100384-0-1 0			6		100508-0-1 0		6	101064-0-10		7	101119-4-10	2		702423-0-00	2	733806-0-00	11-12		766500-6-1 0
100385-0-10			2					101 065-0-1 0		1	101121-0-11	7		703005-0-00	13	740035-0-00	12		778426-0-00		9
					100517-0-10	6
100386-0-10		2			100533-2-10	7		101 066-0-1 0		2	101122-0-10	4		703008-0-00	12	740336-2-00	3		778429-0-00		9
100387-0-10		2			100534-0-1 0		11-12	101067-3-10		2	101123-0-10	6		703308-0-00	5	740565-0-00	12		778469-0-00		9
100389-0-1 0			4		100536-2-1 0		11-12	101068-4-10		2	101124-0-10	6		703819-0-00	2	741040-0-00	11-12		778502-0-00		9

From the library of Superior Sewing Machine & Supply LLC - www.supsew.com

																INDICE NUMERICO			INDEX
	Part. N.			Ta11. N.	Part. N.	Tall. N.	Part. N.	Ta11. N.	Part. N.	Ta11. N.			Part. N.	Ta11. N.	Part. N.	Ta11. N.	Part. N.		Ta11. N.
	778504-0-00			9	991114-0-00	13
	782701-0-11			8	991118-0-00	13
	900203-0-1 0			8	99111 9-4-00	13
	900918-0-00			10	991120-5-00	13
	900920-0-00			10	991121-3-00	13
	90092 5-4-01			10	991122-2-00	13
	900926-0-00			10	9911 29-3-00	13
	900927-0-00		10		991130-0-00	13
	900928-0-00		10		991162-0-00	13
	900929-0-01		10		991163-0-00	13
	900931-0-00		10		991179-0-00	13
	920010-0-10		12
	920014-0-10		12
	920033-0-1 0		12
	920034-2-10		12
	920036-0-1 0		12
	920037-0-10		12
	920038-4-1 0		12
	920039-0-1 0		12
	920043-0-1 0		12
	920045-0-1 0		12
	920150-0-10		12
	99001 3-0-11		10
	990079-1-1 0		10
	990172-0-10		10
	990173-0-10		10
	990174-0-1 0		10
	990175-0-10		10
	990176-0-10		10
	990179-4-11		10
	990181-0-10		10
	990188-0-1 0		10
	990256-0-1 0		8
	990258-0-1 0		8
	990259-0-10		8
	99032 5-0-1 0		10
	991108-2-00		13
	99111 0-0-00		13
	991111-Q-00		13
	991112-0-00		13
	991113-0-00		13

From the library of Superior Sewing Machine & Supply LLC - www.supsew.com

TAV.1

3

9---a

From the library of Superior Sewing Machine & Supply LLC - www.supsew.com

TAV.1

	Fig.	N.				Part.		N.	j
						Bestell N.					DESCRIZIONE	DESCRIPTION	BENENNUNG	DESCRIPTION		DESCRIPCION
	Abb. N.
						Piece		N.	0~
						Pieza		N.
	1					101065-0-10			2	I	volantino	pulley
	2					101111-0-10			2	I	flangia	flange
	3					721474-2-00			6		vite	screw
	4					101108-0-10			2		distanziale	spacer
	5					700131-0-00			2		seeger	circlip
	6					10 111 0-0-1 0			1		flangia olio	oil flange
	7'					727854-2-00			2		vite	screw
	8					101109-0-10			1		anello di rasamento	shim
	9					200022-0-10			4		vite	screw

From the library of Superior Sewing Machine & Supply LLC - www.supsew.com

From the library of Superior Sewing Machine & Supply LLC - www.supsew.com

TAV.2

Fig.	N.	Part.	N.			j
		Bestell N.							DESCRIZIONE	DESCRIPTION	BENENNUNG	DESCRIPTION			DESCRIPCION
Abb.	N.
		Piece	N.	0~
		Pieza	N.
•		101119-4-10		1				I	barra ago completa	needle bar assembly
		101 068-4-10		1					albero principale completo	main shaft assembly
*
•		101067-3-10		1				I	albero principale con biella	main shaft with con rod
1		100380-0-1 0		1					guida filo	thread guide
2		10037 5-0-1 0		1					barra ago	needle bar
3		727026-0-00		6					vite	screw
4		742811-0-00		3					vite	screw
5		200154-0-10		1					giunto	joint
6		100386-0-1 0		1					bussola anteriore	front bush
7		721464-2-00		1					vite	screw
8		100381-0-10		1					attacco per barra ago	clamp for needle bar
9		100385-0-10		1					bussola posteriore	rear bush
10		100349-0-1 0		3					bussola	bush
11		100354-2-10		1					piede di biella	con rod small end
12		743450-2-00		2					vite	screw
13		101092-0-10"		1					feltro	felt
14		101107-0-10		4					cuscinetto	bearing
15		101066-0-10		1					albero principale	main shaft
16		702423-0-00		4					molla a tazza	cup spring
17		100446-0-1 0		1					tirante	tie-rod
18		100362-0-1 0		2					dado	nut
19		703819-0-00		2					distanziale	spacer
20		101545-0-10		1					squadretta porta ago	bracket
21		741132-2-00				1			vite	screw
22		100379-0-1 0				1			piastrina fissaggio ago	plate
23		721433-2-00				1			vite	screw
24		100432-0-10				2			bussola	bush
25		100431-0-10		2					anello di registro	adjustment ring
26		100387-0-1 0		1					leva comando barra ago	needle bar control lever
27		100402-0-10		1					force II a	fork
28		100430-0-1 0		1					perno	pin

From the library of Superior Sewing Machine & Supply LLC - www.supsew.com

6

i~

~

B C D

From the library of Superior Sewing Machine & Supply LLC - www.supsew.com

TAV.3

	Fig.	N.					Part.		N.		j
							Bestell N.						DESCRIZIONE		DESCRIPTION			BENENNUNG	DE;SCRIPTION		DESCRIPCION
	Abb. N.
							Piece		N.	0~
							Pieza		N.
	...*				101134-4-10					1			biella completa		con-rod assembly
					101137-4-10					1			biella completa		con-rod assembly
	•				101102-4-10					1			biella completa		con-rod assembly
	1				101071-0-10					1			crochet centrale		central looper
	2				100400-0-1 0					1			passafilo		thread guide
	3				742430-2-00					1			vite		screw
	4				101097-0-10					1			barra porta crochet		looper bar
	5				100418-0-10					2			perno per crociera		pin
	6				745537-0-00					2			vite		screw
	7				100620-0-1 0					2			fascetta		clamp
	8				741745-2-00					6			vite		screw
	9				100314-3-10					1			testa biella con sfera		con-rod big end with ball
	10				100409-0-1 0					1			fascetta (non fornibili)		clamp (not supplied)
	11				741757-0-00					1			vite		screw
	12				100313-2-10					1			testa di biella		con-rod big end
	13				740336-2-00					1			vite		screw
	14				100346-2-10					1			leva		lever
	15				100403-0-1 0					1			crociera		coupling
	16				745014-2-00					1			vite		screw
	17				100619-0-10					1			morsetto		clamp
	18				100415-0-10					1			bussola elastica		spring bush
	19				100347-3-10					1			leva con sfera		lever with ball
	20				101118-0-1 0					1			manicotto porta sfera		coupling
	21				100315-0-10					2			forcella guida sfera		guide ball fork
	22				100362-0-10					6			dado		nut
	23				100443-0-1 0					3			tirante per biella		tie
	24				101136-3-10					1			piede biella con eccentrico		con-rod small end with eccentric
	25				101101-2-10					1			piede di biella		con-rod small end
	26				745317-0-00					4			vite		screw
	27				101135-0-10					1			eccentrico (non fornibile)		eccentric (not supplied)
	28				743482-2-00					4			vite		screw
	29				101133-3-10					1			piede biella con eccentrico		con-rod small end with eccentric
	30				100310-2-10					1			piede di biella		con-rod small end
	31				101132-0-10					1			eccentrico (non fornibile)		eccentric (not supplied)
	32				727012-0-00					1			vite		screw
	33				100349-0-1 0					1			bussola		bush
	34				100402-0-1 0					1			forceIIa		fork
	35					100416-Q-10				1			perno per leva		pin for lever
	36				100411-3-10					1			testa biella con sfera		con-rod big end with ball
	37				743251-2-00					2			vite		screw
	38				100426-2-00					1			piede di biella		con rod small end
	39				741963-0-00					2			vite		screw
	40					10041 0-Q-1 0				1			fascetta (non fornibile)		clamp (not supplied)
	41				100424-3-1 0					1			piede di biella con eccentrico		con-rod small end with eccentric
	42				743471-2-00					2			vite		screw
	43				100423-2-10					1			piede di biella		con-rod small end
	44				727026-0-00					2			vite		screw
	45					100428-Q-1 0				1			eccentrico (non fornibile)		eccentric (not supplied)
													PEZZI A RICHIESTA		ONLY ON REQUEST
	A				101073-4-00					1			crochet con salva ago		looper with rear needle guard
	B					721411-Q-00				2			vite		screw
	c				101076-0-10					1			salva ago		rear needle guard
	D				101072-0-10					1			crochet		looper

From the library of Superior Sewing Machine & Supply LLC - www.supsew.com

TAV.4

From the library of Superior Sewing Machine & Supply LLC - www.supsew.com

TAV.4

Fig.	N.		Part.	N.		::c
			Bestell	N.
Abb.	N.					.IS			DESCRIZIONE		DESCRIPTION	BENENNUNG	DESCRIPTION			DESCRIPCION
			Piece	N.
						5~
			Pieza	N.
*		101141-4-10				1	I		biella completa		con-rod assembly
		101140-3-10							piede biella con eccentrico		con-rod small end with eccentric
A						1 I
1		101088-0-10				1			perno		pin
2		742932-0-00			I	2			vite		screw
3		100389-0-1 0				1			braccio		arm
4		101122-0-10			I	1			leva comando crochet laterale		looper control lever
					I
5		200022-0-10				1			vite		screw
6		100417-0-10				1			bussola		bush
7		10 11 39-0-1 0				1			crochet latetale		side looper
8		721485-2-00				2			vite		screw
9		705839-0-00				1			rondella in fibra		washer
10		743251-2-00				2			vite		screw
11		100427-3-10				1			testa biella con sfera		con-rod big end with ball		.
12		100362-0-10				2			dado		nut
13		100447-0-1 0				1			tirante per biella		tie-rod
14		743482-2-00				2			vite		screw
15		101101-2-10				1			piede di biella		con-rod small end
16		101138-0-10				1			eccentrico(non fornibile)		eccentric
17		745317-0-00				2			vite		screw

From the library of Superior Sewing Machine & Supply LLC - www.supsew.com