Page 1
MODIFICATION BULLETIN NO. 1 PAGE 1 OF 2
ISSUED ON: October 31, ’93
Model Finisher for F410 Volt/Hz
Modified Article Parts Catalog
Reason for
Parts catalog correction
Modification
Modification
Could you please correct your parts catalog as follows:
Incorrect P/N Correct P/N Description Q’ty Used
Index No. Page
A3791636 Pulley Flange - 8 x 35 x 1
11915
AB033060 Timing Pulley - 18 / 33Z
A3772121 A3772126 Relay Guide 1 2 7
Parts Catalog
Date of
Serial Number
S. Hamano, Assistant General Manager
Technical Support Department
Page 2
MODIFICATION BULLETIN NO. 1 PAGE 2 OF 2
JAPN PRODUCTION
ISSUED ON: October 31, ’93
MODEL NAME
Savin 9550/9650
Finisher
Ricoh SR400
NRG CFN55
Infotec Stapler III 230/50 Europe A379 - 26
V/Hz DESTINATION
CODE SERIAL NUMBER
120/60 U.S.A. A379 - 15
120/60 U.S.A. etc.
230/50 Europe etc.
120/60
230/50 Europe etc.
U.S.A. , Canada
etc.
A379 - 17
A379 - 22
Page 3
MODIFICATION BULLETIN NO. 2 PAGE 1 OF 2
ISSUED ON: January 31, ’94
Model Finisher for F410 Volt/Hz
Modified Article Parts Catalog
Reason for
Parts catalog correction
Modification
Inter-
Old P/N New P/N Description Q’ty Used
A3792610 A3532116 Paddle Roller
A3792610 Exit Transport Roller
A3792617 Paddle
4 → 4
2 → 0
0 → 2
change-
ability
Date of
Modification
Parts Catalog
Index No. Page
14 13
15 13
15 13
Serial Number
S. Hamano, Assistant General Manager
Technical Support Department
Page 4
MODIFICATION BULLETIN NO. 2 PAGE 2 OF 2
JAPAN PRODUCTION
ISSUED ON: January 31, ’94
MODEL NAME
Savin 9550/9650
Finisher
Ricoh SR400
NRG CFN55
Infotec Stapler III 230/50 Europe A379 - 26
V/Hz DESTINATION
CODE SERIAL NUMBER
120/60 U.S.A. A379 - 15
120/60 U.S.A. etc.
230/50 Europe etc.
120/60
230/50 Europe etc.
U.S.A. , Canada
etc.
A379 - 17
A379 - 22
Page 5
MODIFICATION BULLETIN NO. 3 PAGE 1 OF 2
OLD
ISSUED ON: January 31, ’94
Model Finisher for F410 Volt/Hz
Modified Article Exit Transport Roller etc.
Reason for
To improve the paper stuck in jogger unit
Modification
To improve the paper stuck in jogge r u nit , the front and rear brush rolle r have been modified.
Inter-
Old P/N New P/N Description Q’ty Used
A3792610 A3792631 Exit Transport Roller
A3003271 A3792635 Positioning Brush
A3003272 A3792636 Rear Positioning Brush
1 → 1
1 → 1
1 → 1
change-
ability
X/O 11 13
X/O 12 13
X/O 13 13
Date of
Modification
Parts Catalog
Index No. Page
Serial Number
NEW
S. Hamano, Assistant General Man ag er
Technical Support Departme nt
Page 6
MODIFICATION BULLETIN NO. 3 PAGE 2 OF 2
JAPAN PRODUCTION
ISSUED ON: January 31, ’94
MODEL NAME
Savin 9550/9650
Finisher
Ricoh SR400
NRG CFN55
Infotec Stapler III 230/50 Europe A379 - 26 3E11130001
V/Hz DESTINATION
CODE SERIAL NUMBER
120/60 U.S.A. A379 - 15 415110001
120/60 U.S.A. etc.
230/50 Europe etc.
120/60
230/50 Europe etc.
U.S.A. , Canada
etc.
A379 - 17 A3413100326
A379 - 22 5353110001
Page 7
MODIFICATION BULLETIN NO. 4 PAGE 1 OF 2
Old
Reissued on: January 15, ’95
ISSUED ON: October 15, ’94
Model Finisher for F410 / 420 Volt/Hz
Modified Article Actuator Bracket
Reason for
To increase the strength
Modification
To increase the streng th , the actuator shape has bee n cha ng ed as shown .
For details, please ref er to RTB No. 27 for F400 / 410.
Inter-
P/N New P/N Description Q’ty Used
A3533171 Actuator Bracket
A3791225 Upper Sensor Actuator
1 → 0
0 → 1
change-
ability
X/O 1 15
Index No. Page
Parts Catalog
Date of
Modification
Serial Number
New
S. Hamano, Assistant General Manager
Technical Support Department
Page 8
MODIFICATION BULLETIN NO. 4 PAGE 2 OF 2
JAPAN PRODUCTION
Reissued on: January 15, ’95
ISSUED ON: October 15, ’94
MODEL NAME
Savin 9550/9650
Finisher
Ricoh SR400
NRG CFN55
Infotec Stapler III 230/50 Europe A379 - 26 3E10440001
V/Hz DESTINATION
CODE SERIAL NUMBER
120/60 U.S.A. A379 - 15 4154070001
120/60 U.S.A. etc.
230/50 Europe etc.
120/60
230/50 Europe etc.
U.S.A. , Canada
etc.
A379 - 17 A3414040001
A379 - 22 5354040001
Page 9
MODIFICATION BULLETIN NO. 5 PAGE 1 OF 4
ISSUED ON: December 31, ’94
Model Finisher for F410 / 420 Volt/Hz
Modified Article Supporting Lower Plate / Scraper / Lock Pin Spring
Reason for
To prevent the positioning roller from being marked
Modification
Inter-
Old P/N New P/N Description Q’ty Used
6 → 0
A4582479 Lock Pin Spring
AA063529 Pressure Spring - 14.5mm
A3792512 A3792519 Supporting Lower Guide
A3792515 Scraper
4 → 0
2 → 0
0 → 6
0 → 4
0 → 2
1 → 1
0 → 1
change-
ability
X/
/O
X/O
Date of
Modification
Parts Catalog
Index No. Page
10
5
19
10
5
19
18 13
* 29 13
5
7
13
5
7
13
Serial Number
* New Index
Page 10
MODIFICATION BULLETIN NO. 5 PAGE 2 OF 4
* 29
Scraper
ISSUED ON: December 31, ’94
DETAILS OF MODIFICATION
1. Supporting Lower Guide / Scraper
If some kinds of paper which contain a lot of Calcium Carbonat e are used, the toner in half to ne ima ge area s cann ot
be fused onto the paper completely. The po sitio nin g rolle r picks u p this unf used toner and becomes contaminate d,
and this may cause a positioning rolle r mark t o appe ar on the copy pape r. To preve nt this, a scraper has been
stuck on the supporting lower guide to keep the roller surface clean. At every PM visit, please remove the scraped
toner which is stuck on the lower g uid e plate.
# 16
Supporting Lower Guide
Positioning Roller Mark
Page 11
MODIFICATION BULLETIN NO. 5 PAGE 3 OF 4
Page 14
DETAILS OF MODIFICATION
2. Lock Pin Spring
To facilitate servicing, the outer diameter of the spring has been changed fro m 7 mm to 6.5 mm.
As a result of this diameter change, th e sprin g positio ning pins on the supporting lower guid e have been
decreased from 6 mm to 5.5 mm.
ISSUED ON: December 31, ’94
Page 4
* 10
* 10
P/N A4582479
P/N AA063529
Page 8
# 5
# 5
P/N A4582479
P/N AA063529
# 18 P/N A3792512
P/N A3792519
# 19
P/N A4582479
P/N AA063529
# 19
P/N A4582479
P/N AA063529
S. Hamano, Assistant General Manager
Technical Support Department
Page 12
MODIFICATION BULLETIN NO. 5 PAGE 4 OF 4
JAPAN PRODUCTION
ISSUED ON: December 31, ’94
MODEL NAME
Savin 9550/9650
Finisher
Ricoh SR400
NRG CFN55
Infotec Stapler III 230/50 Europe A379 - 26 3E10740001
V/Hz DESTINATION
CODE SERIAL NUMBER
120/60 U.S.A. A379 - 15 4154070001
120/60 U.S.A. etc.
230/50 Europe etc.
120/60
230/50 Europe etc.
U.S.A. , Canada
etc.
A379 - 17 A3414060001
A379 - 22 5354070001
Page 13
MODIFICATION BULLETIN NO. 6 PAGE 1 OF 2
ISSUED ON: June 15, ’95
Model Finisher for F410 / 420 Volt/Hz
Modified Article Fiber Cable
Reason for
Parts Catalog Correction
Modification
The following part number is missing in the Pa rts Cat alo g, Plea se correct your Parts Catalog.
New P/N Description Q’ty Used
AW030033 Fiber Cable
0 → 1
Index No. Page
* 27 21
* New Index #
# 27
Modification
Parts Catalog
Date of
Serial Number
M. Iwasa, Manager
Technical Support Department
Page 14
MODIFICATION BULLETIN NO. 6 PAGE 2 OF 2
ISSUED ON: June 15, ’95
JAPN PRODUCTION
MODEL NAME
Savin 9550/9650
Finisher
Ricoh SR400
NRG CFN55
Infotec Stapler III 230/50 Europe A379 - 26
V/Hz DESTINATION
CODE SERIAL NUMBER
120/60 U.S.A. A379 - 15
120/60 U.S.A. etc.
230/50 Europe etc.
120/60
230/50 Europe etc.
U.S.A. , Canada
etc.
A379 - 17
A379 - 22
Page 15
MODIFICATION BULLETIN NO. 7 PAGE 1 OF 2
ISSUED ON: August 31, ’95
Model Finisher for F410 / 420 Volt/Hz
Modified Article Main Control Board etc.
Reason for
For CE Mark Compliance
Modification
To meet the European CE mark standards, the following parts have been changed.
Inter-
Old P/N New P/N Description Q’ty Used
A3795601 A3795611 Main Control Board
11050159 11050378 PCB Stand
1 → 1
4 → 4
X/O (Europe) 22 21
O/O (Other than Europe)
X/O (Europe) 114 21
O/O (Other than Europe)
change-
ability
Date of
Modification
Parts Catalog
Index No. Page
Serial Number
M. Iwasa, Manager
Technical Support Department
Page 16
MODIFICATION BULLETIN NO. 7 PAGE 2 OF 2
JAPAN PRODUCTION
ISSUED ON: August 31, ’95
MODEL NAME
Savin 9550/9650
Finisher
Ricoh SR400
NRG CFN55
Infotec Stapler III 230/50 Europe A379 - 26 3E10750001
V/Hz DESTINATION
CODE SERIAL NUMBER
120/60 U.S.A. A379 - 15 4155070001
120/60 U.S.A. etc.
230/50 Europe etc.
120/60
230/50 Europe etc.
U.S.A. , Canada
etc.
A379 - 17 A3415070001
A379 - 22 5355070001
Page 17
MODIFICATION BULLETIN NO. 8 PAGE 1 OF 2
ISSUED ON: November 15, ’95
Model Finisher for F410 / 420 Volt/Hz
Modified Article Relay Guide
Reason for
Part Standardization
Modification
The following part has been changed to sta nd ard ize with oth er mod els.
Inter-
Old P/N New P/N Description Q’ty Used
A3772126 A6062126 Relay Guide
1 → 1
change-
ability
O/O 4 9
Date of
Modification
Parts Catalog
Index No. Page
Serial Number
M. Iwasa, Manager
Technical Support Department
Page 18
MODIFICATION BULLETIN NO. 8 PAGE 2 OF 2
JAPAN PRODUCTION
ISSUED ON: November 15, ’95
MODEL NAME
Savin 9550/9650
Finisher
Ricoh SR400
NRG CFN55
Infotec Stapler III 230/50 Europe A379 - 26 3E1115XXXX
V/Hz DESTINATION
CODE SERIAL NUMBER
120/60 U.S.A. A379 - 15 415511XXXX
120/60 U.S.A. etc.
230/50 Europe etc.
120/60
230/50 Europe etc.
U.S.A. , Canada
etc.
A379 - 17 A3415100001
A379 - 22 5355100010
Page 19
M. Iwasa, Manager
Technical Support Department
MODIFICATION BULLETIN NO. 9 PAGE 1 OF 2
ISSUED ON: January 15, ’96
Model Finisher for F400 / 410 / 420 Volt/Hz
Modified Article
Reason for
Modification
Transport Guide
Parts Standardization
To standardize with other models, the following part has been cha nged .
Inter-
Old P/N New P/N Description Q’ty Used
A3792431 A6122431 Transport Guide
1 → 1
change-
ability
O/O 9 7
Date of
Modification
Parts Catalog
Index No. Page
Serial Number
Page 20
MODIFICATION BULLETIN NO. 9 PAGE 2 OF 2
JAPAN PRODUCTION
ISSUED ON: January 15, ’96
MODEL NAME
Savin 9550/9650
Finisher
Ricoh SR400
NRG CFN55
Infotec Stapler III 230/50 Europe A379 - 26 3E1
V/Hz DESTINATION
CODE SERIAL NUMBER
120/60 U.S.A. A379 - 15 415
120/60 U.S.A. etc.
230/50 Europe etc.
120/60
230/50 Europe etc.
U.S.A. , Canada
etc.
A379 - 17
A379 - 22 535
A341
Page 21
MODIFICATION BULLETIN NO. 10 PAGE 1 OF 2
ISSUED ON: January 31, ’96
Model Finisher for F410 / 420 Volt/Hz
Modified Article
Reason for
Modification
Lower Left Plate etc.
Part standardization
To standardize with other models, the following parts have been chang ed .
Inter-
Old P/N New P/N Description Q’ty Used
A3003531 A6084131 Lower Left Plate
A3794211 A6084311
Stapler Holder
1 → 1
1 → 1
change-
ability
O/O 37 11
O/O 4 11
Date of
Modification
Parts Catalog
Index No. Page
Serial Number
M. Iwasa, Manager
Technical Support Department
Page 22
MODIFICATION BULLETIN NO. 10 PAGE 2 OF 2
JAPAN PRODUCTION
ISSUED ON: January 31, ’96
MODEL NAME
Savin 9550/9650
Finisher
Ricoh SR400
NRG CFN55
Infotec Stapler III 230/50 Europe A379 - 26 3E1
V/Hz DESTINATION
CODE SERIAL NUMBER
120/60 U.S.A. A379 - 15 415
120/60 U.S.A. etc.
230/50 Europe etc.
120/60
230/50 Europe etc.
U.S.A. , Canada
etc.
A379 - 17
A379 - 22 535
A341
Page 23
MODIFICATION BULLETIN NO. 11 PAGE 1 OF 2
ISSUED ON: July 15, ’96
Model Finisher for F410 / 420 Volt/Hz
Modified Article Rear Frame
Reason for
Part standardization
Modification
To standardize with other models, the following part has been changed.
Inter-
Old P/N New P/N Description Q’ty Used
A3003521 A6124121 Rear Frame
1 → 1
change-
ability
O/O 17 11
Date of
Modification
Parts Catalog
Index No. Page
Serial Number
T. Inoue, General Manager
1st Field Information Dept. QAC
Page 24
MODIFICATION BULLETIN NO. 11 PAGE 2 OF 2
JAPN PRODUCTION
ISSUED ON: July 15, ’96
MODEL NAME
Savin 9550/9650
Finisher
Ricoh SR400
NRG CFN55
Infotec Stapler III 230/50 Europe A379 - 26
V/Hz DESTINATION
CODE SERIAL NUMBER
120/60 U.S.A. A379 - 15
120/60 U.S.A. etc.
230/50 Europe etc.
120/60
230/50 Europe etc.
U.S.A. , Canada
etc.
A379 - 17
A379 - 22
Page 25
MODIFICATION BULLETIN NO. 12 PAGE 1 OF 2
ISSUED ON: January 31, ’97
Model Finisher for F410 / 420 Volt/Hz
Modified Article Rear Stapler Positioning Fence
Reason for
Parts standardization
Modification
Due to parts standardization, the rear stapler positioning fence has been changed.
Inter-
Old P/N New P/N Description Q’ty Used
A379 4259
A612 4258 Positioning Fence Mylar Rear
A612 4259 Positioning Fence Mylar Front
Positioning Fence Mylar
2 → 0
0 → 1
0 → 1
change-
ability
O/ 6 9
/O 44 9
/O 45 9
Date of
Modification
Parts Catalog
Index No. Page
Serial Number
#6 → #45
#6 → #44
T. Inoue, General Manager
1st Field Information Dept. QAC
Page 26
MODIFICATION BULLETIN NO. 12 PAGE 2 OF 2
JAPAN PRODUCTION
ISSUED ON: January 31 ’97
MODEL NAME
Savin 9550/9650
Finisher
Ricoh SR400
NRG CFN55
Infotec Stapler III 230/50 Europe A379 - 26
V/Hz DESTINATION
CODE SERIAL NUMBER
120/60 U.S.A. A379 - 15
120/60 U.S.A., etc.
230/50 Europe, etc.
120/60
230/50 Europe, etc.
U.S.A. , Canada,
etc.
A379 - 17
A379 - 22
Page 27
RICOH Modification Bulletin PAGE: 1/1
Model: Finisher for F400/410/420 Date: 15-Jun-97
No: 13
Modified Article: Stapler Guide Rail Prepared by: M.Kitajima
From: QAC 1st Field Information Dept.
Reason for
Modification:
Parts catalog correction
To facilitate assembly
Part standardization
Vendor change
To improve reliability
Other
To meet standards
( )
Old part New part Description Qty Int Page Index Note
number number
A3003732 A6974186 Stapler Guide Rail 1-1 O/O 11 33
To standardize with other models, the above mentioned part has been changed.
MODEL NAME V/ Hz DESTINATION CODE SERIAL
NUMBER
Savin 9550/
9650 Finisher
Ricoh SR400 120/ 60 U. S. A., etc. A379 - 17 Service part only
NRG CFN55 120/ 60 U. S. A. ,
Infotec Stapler
III
120/ 60 U. S. A. A379 - 15 Service part only
230/ 50 Europe, etc.
A379 - 22 Service part only
Canada, etc.
230/ 50 Europe, etc.
230/ 50 Europe A379 - 26 Service part only
Page 28
RICOH Modification
Bulletin
PAGE: 1/1
Model:
Modified Article:
From:
Reason for
Modification:
To improve paper alignment in staple mode, the shapes of the front and rear jogger fences
have been changed.
Finisher for F400/410/420
Front/Rear Jogger Fence
Technical Service Dept., GTS Division
Parts catalog correction
To facilitate assembly
Part standardization
Old part
number
A3003611 B3124155 Front Jogger Fence 1 X/O 9 19
A3003621 B3124150 Rear Jogger Fence 1 X/O 9 18
New part
number
Description Q’ty Int Page Index Note
Date:
Vendor change
To improve reliability
Other
31-Oct-99
Prepared by:
Rear Jogger Fence
No.:
MA379014
F.Noguchi
To meet standards
( )
Front Jogger Fence
Loading...