Ricoh FW830 Modification Bulletin
ISSUED ON: April 15, ’93
MODIFICATION BULLETIN NO. 1 PAGE 1 OF 3
Model J3 Volt/Hz
Modified Article Parts Catalog
Reason for
Parts Catalog Correction
Modification
1. Mis - Registered Part Removal (OEM only)
The UL decal is listed in the parts catalog. It is a part which should be installed only in the factory.
Please delete the following part from your parts catalog.
Page Index P/N Description
93 19 A0233181 UL Decal
2. Part Number Correction
Please correct the following part numbers:
Page Index Incorrect P/N Correct P/N Description
93 11 A0232074 High Voltage Decal
93 11 A0232286 Decal - Drum Replacement (Ricoh only)
Date of
Modification
Serial Number
3. Please delete the following part: (Ricoh only)
23 46 AA143226 Stud - Wire Height Adjustment
23 46 54221737 Shaft
69 147 16018138 Variable Register - 30KΩ 0.75W
69 147 16018157 Variable Register - 100KΩ
Page Index P/N Description
93 15 A0232286 Decal - Drum Replacement
ISSUED ON: April 15, ’93
T. Ito, Manager
Copier Technical Support
MODIFICATION BULLETIN NO. 1 PAGE 2 OF 3
4. Index Number Correction (Ricoh only)
Please correct the following index numbers in your parts
Page Incorrect Index No. Correct Index No. P/N Description
95 2 3 A0239504 Test Chart OS-A-1 (2 sheets/set)
95 3 2 A0239520 Current Measuring Drum
MODIFICATION BULLETIN NO. 1 PAGE 3 OF 3
ISSUED ON: April 15, ’93
MODEL NAME
K+E 7036 115/60 USA, CANADA A098-12
OZALID EF3000
RICOH FW830
REGMA 916
V/Hz DESTINATION CODE SERIAL NUMBER
220, 230,
240/50
220, 230,
240/50
220, 230,
240/50
EUROPE A098-21
EUROPE A098-27
EUROPE A098-37
MODIFICATION BULLETIN NO. 2 PAGE 1 OF 2
ISSUED ON: November 15, ’93
Model J3 Volt/Hz
Modified Article Parts Catalog
Reason for
Parts Catalog Correction
Modification
Please correct your parts catalo g as follows:
Description Correction
Parts Catalog
Page Index No.
55 23 AX020044 Motor - DC 10W Motor - AC 55 / 48W
55 36 AX020045 Motor - DC 40W Motor - AC 98 / 100W
Date of
Modification
P/N Incorrect Description Correct Description
Serial Number
S. Hamano, Assistant General Manager
Technical Support Department
MODIFICATION BULLETIN NO. 2 PAGE 2 OF 2
ISSUED ON: November 15, ’93
MODEL NAME
K +E 7036 115/60 USA, CANADA A098-12
OZALID EF3000
RICOH FW830
REGMA 916
V/Hz DESTINATION CODE SERIAL NUMBER
220, 230,
240/50
220, 230,
240/50
220, 230,
240/50
EUROPE A098-21
EUROPE A098-27
EUROPE A098-37
MODIFICATION BULLETIN NO. 3 PAGE 1 OF 4
ISSUED ON:January 15, ’94
Model J3 Volt/Hz
Modified Article Parts Catalog
Reason for
Parts catalog correction
Modification
Please correct your parts catalo g as follows:
1. P/N correction
Parts Catalog
Page Index No.
9 24 A0231271 A0981233 Rear Right Cover - Lower Unit (Ricoh, K + E)
9 24 A0231370 A0981234 Rear Right Cover - Lower Unit (Hoechst)
9 24 A0231385 A0981235 Rear Right Cover - Lower Unit (Regma)
11 30 A0984975 A0984976 Decal - Place Original (Hoechst only)
59 3 A0235331 A0905550 Power Pack Harness - T
59 4 A0235332 A0905551 Power Pack Harness - D
Date of
Modification
Incorrect P/N Correct P/N Description
Serial Number
71 107 14021035 14030328 L.E.D. - PY555IK
71 109 14030338 14030666 L.E.D. - SLR - 33VC3F
71 110 14030500 14030667 L.E.D. - SLR - 33MC3F
2. Not listed
Please add the following parts to your parts catalog:
Parts Catalog
Page Index No.
9 *40 A0981236 Fixing Plate 1
P/N Description Draw No.
* New Index
MODIFICATION BULLETIN NO. 3 PAGE 2 OF 4
ISSUED ON:January 15, ’94
DETAILS OF MODIFICATION
3. Illustration Correction
Please correct the illustration of your parts catalog on page 8 (Draw No. 1) and on page 4 (Draw No. 2 and No. 3).
Delete
24
104
103
40
Draw No. 1
Old
Draw No. 2
Draw No.3
New
MODIFICATION BULLETIN NO. 3 PAGE 3 OF 4
DETAILS OF MODIFICATION
4. Description Correction
ISSUED ON:January 15, ’94
Parts Catalog
Page Index No.
11 30 A0984977 Decal - Cyncronzed Decal - Place Original (Ricoh, K + E)
11 30 A0984978 Decal - Cyncronzed Decal - Place Original (REGMA)
65 22 AZ140021 Transformer - EU
5. Not used
Please delete the following parts:
Parts Catalog
Page Index No.
13 32 A0236298 Spacer
65 18 A4533005 Bracket - Cassette Relay Harness 3
65 114 08025094 Tapping Truss Head Screw - M4 x 8 3
P/N Incorrect Description Description
Transformer - 220, 230, 240V / 100V
(OEM only)
P/N Incorrect Description Draw No.
S. Hamano, Assistant General Manager
Technical Support Department
MODIFICATION BULLETIN NO. 3 PAGE 4 OF 4
ISSUED ON:January 15, ’94
MODEL NAME
K+E 7036 115/60 USA, CANADA A098-12
OZALID EF3000
RICOH FW830
REGMA 916
V/Hz DESTINATION CODE SERIAL NUMBER
220, 230,
240/50
220, 230,
240/50
220, 230,
240/50
EUROPE A098-21
EUROPE A098-27
EUROPE A098-37
MODIFICATION BULLETIN NO. 4 PAGE 1 OF 3
ISSUED ON: July 31, ’94
Model J3 Volt/Hz
Modified Article Original Guide Mylar
Reason for
For easier original insertion
Modification
Draw
No.
Old Parts
No.
New Parts
No.
A0984610
Description Rank
Original Guide Mylar - 580 x
15
Q’ty Used
Old→→New
0 → 2
Inter-
change-
ability
Date of
Modification
Parts needed for replacement by new part
Part No. Description No. Page
* New Index
Serial
Number
Parts
Catalog
*45 11
Rank: A : Replace with new parts immediately. B : Replace with new parts at time of repair. C : Replace with new parts at time of overhaul.
Interchangeability:
(1) When old and new parts are not mutually interchangeable, use additional parts or an assembly part as indicated in "Parts needed for
replacement by new part" to install the new part.
(2) The mark to the left of the slash indicates whether the old part can be used in the new machine, and the mark to the right indicates whether
the new part can be used in the old machine. x = Not interchangeable o = Interchangeable
MODIFICATION BULLETIN NO. 4 PAGE 2 OF 3
DETAILS OF MODIFICATION
ISSUED ON: July 31, ’94
Original Guide Mylar - 580 x 15
Upper Front Guide Plate
(A0234666)
It has been reported that the leading edge of curled originals may be caught by the upp er fro nt guid e pla te when
the original is inserted. As per field requ est , for easier original insertio n, two mylars have be en stuck on the
upper fron t guide plate.
S. Hamano, Assistant General Manager
Technical Support Department
MODIFICATION BULLETIN NO. 4 PAGE 3 OF 3
ISSUED ON: July 31, ’94
MODEL NAME
K+E 7036 115/60 USA, CANADA A098-12 7363050001
OZALID EF3000
RICOH FW830
REGMA 916
V/Hz DESTINATION CODE SERIAL NUMBER
220, 230,
240/50
220, 230,
240/50
220, 230,
240/50
EUROPE A098-21 6751130001
EUROPE A098-27 A3434050001
EUROPE A098-37 28600041
MODIFICATION BULLETIN NO. 5 PAGE 1 OF 4
ISSUED ON: July 31, ’94
Model J3 Volt/Hz
Modified Article Left and Right Side Plates
Reason for
To ensure cover open / close operation
Modification
Draw
No.
Old Parts
No.
A0904447 A0904462 Left Side Plate - Exit Unit
AA143074 Stepped Screw - M4 X 5
A0904451 A0904463 Right Side Plate
New Parts
No.
AA143420 Stepped Screw - M4 X 5
Description Rank
Q’ty Used
Old→→New
1 → 1
4 → 2
0 → 2
1 → 1
Date of
Modification
Inter-
change-
ability
X/X X/O as a set 1 51
X/X X/O as a set * 25 49
X/X 8 51
Parts needed for replacement by new part
Part No. Description No. Page
* New Index
Serial
Number
Parts
Catalog
19 49
Rank: A : Replace with new parts immediately. B : Replace with new parts at time of repair. C : Replace with new parts at time of overhaul.
Interchangeability:
(1) When old and new parts are not mutually interchangeable, use additional parts or an assembly part as indicated in "Parts needed for
replacement by new part" to install the new part.
(2) The mark to the left of the slash indicates whether the old part can be used in the new machine, and the mark to the right indicates whether
the new part can be used in the old machine. x = Not interchangeable o = Interchangeable
MODIFICATION BULLETIN NO. 5 PAGE 2 OF 4
3
DETAILS OF MODIFICATION
[C]
[B]
[A]
1.1
ISSUED ON: July 31, ’94
3
7 → 4
When the paper exit cover [ A] is opened , the stepped screw [B] of th e pa pe r exit may sometimes contact the rig ht
cover [C]. To correct this, the dime nsions of the left side pla te , right side plate, and step pe d screw ha ve be en
changed as shown. When replacing the old side plate in th e fie ld, replace it togeth er with the new side plat e an d
new stepped screw.
MODIFICATION BULLETIN NO. 5 PAGE 3 OF 4
Stepped Screw
DETAILS OF MODIFICATION
ISSUED ON: July 31, ’94
Stepped Screw
61.5
58.5
Left Side Plate
61.5
Right Side Plate
58.5
S. Hamano, Assistant General Manager
Technical Support Department
MODIFICATION BULLETIN NO. 5 PAGE 4 OF 4
ISSUED ON: July 31, ’94
MODEL NAME
K+E 7036 115/60 USA, CANADA A098-12 7363040001
OZALID EF3000
RICOH FW830
REGMA 916
V/Hz DESTINATION CODE SERIAL NUMBER
220, 230,
240/50
220, 230,
240/50
220, 230,
240/50
EUROPE A098-21 6750430001
EUROPE A098-27 A3433040001
EUROPE A098-37 28600021
MODIFICATION BULLETIN NO. 6 PAGE 1 OF 2
ISSUED ON: July 31, ’94
Model J - 3 (USA machines only) Volt/Hz
Modified Article Parts Catalog
Reason for
Parts Catalog Correction
Modification
Please add the following item to your parts catalog.
Parts Catalog
P/N Description Q’ty Used
Index No. Page
A0895550 Lightning Arrester Board (115V) 1 41 59
Date of
Modification
Serial Number
S. Hamano, Assistant General Manager
Technical Support Department
MODIFICATION BULLETIN NO. 6 PAGE 2 OF 2
ISSUED ON: July 31, ’94
MODEL NAME
K+E 7036 115/60 USA, CANADA A098-12
OZALID EF3000
RICOH FW830
REGMA 916
V/Hz DESTINATION CODE SERIAL NUMBER
220, 230,
240/50
220, 230,
240/50
220, 230,
240/50
EUROPE A098-21
EUROPE A098-27
EUROPE A098-37
Loading...