Ricoh fw740 Service Bulletin

echnical Bulletin
T
PAGE: 1/1
Model:
Subject:
From:
J2SS-C3
Service Manual
Technical Services Dept., GTS Division
Classification:
Troubleshooting
Mechanical
Paper path
Other ( )
Part information
Electrical
Transmit/receive
Date:
Prepared by:
No.:
RB047001
F. Noguchi
Action required
Service manual revision
Retrofit information
Please make the following corrections to your Service Manuals (jam codes in bold/italics):
Page 4-25 4.4.2 JAM CODE TABLE
Incorrect
Code Cause of Jam Remarks
dJ05 Initial misfeed at the entrance sensor. dJ06 Initial misfeed at the registration sensor. dJ07 Initial misfeed at the exit sensor. dJ08 Initial misfeed at the leading edge sensor of the roll feeder.
Correct
Code Cause of Jam Remarks
pJ05 pJ06 pJ07 rJ08
Initial misfeed at the entrance sensor. Initial misfeed at the registration sensor. Initial misfeed at the exit sensor. Initial misfeed at the leading edge sensor of the roll feeder.
Loading...