Operation Remote control
4
TV programming
Programming by model number
• Press the
TV
and OK keys on the
remote control for at least 3 seconds,
until the green LED flashes twice.
• Select and enter a 3 digit TV code
corresponding to your television brand
from the code list.
• The green LED flashes twice to confirm
the code input.
• If an invalid 3 digit code has been
entered, the LED lights up for 3
seconds to indicate an error and the
remote control returns to the original
mode.
• If your television doesn't react or
reacts incorrectly, repeat the
programming and enter the next 3 digit
code from the list.
• If none of the defined codes controls
your television, use the automatic code
search option. See
Automatic search
.
If no key is pressed for 10 seconds
during programming, the remote control
automatically returns to the original
mode.
Search with manufacturer number
• Switch your television on.
• Press the
TV
and OK keys on the
remote control for at least 3 seconds,
until the green LED flashes twice.
• Enter the code 0 0 3. The green LED
flashes twice to confirm the input.
• Enter the three digit manufacturer
number from the manufacturer list (see
Appendix). The LED flashes twice to
confirm the input.
• Press and hold the Power TV until the
television switches itself off.
• Then release the key immediately and
press the OK key, in order to save the
selected television code.
The LED lights up every 1.5 seconds
while the search is being made.
• If a 3 digit code is not recognised, the
green LED lights up for 3 seconds and
the remote control is reset to the
normal state. (error display)
• If your television brand (manufacturer)
is not in the code list, indicated by the
remote control flashing 5 times at the
end of the list, use the automatic
search function.