Revox H190 User Manual

Revox Re:sound H190
Re:sound H190 – „forward to the roots”:
With this completely newly developed product, Re:sound H190, Revox is once again setting new standards in the development of high­quality speaker systems. The combination between breathtaking design and the highest audio quality guarantees total listening pleasure.
Great importance was given to achieving a tonal balance across the whole transmission range during product development. The specification also called for a particularly luxurious, dark and dry bass reproduction, a spatial yet discreet mid-range and silken, generous treble tones. A further goal was a high linearity, using the best-possible physical emission characteristics.
The Re:sound H190 is available in veneer cherry or silver varnished and
manufactured in the Revox factory in Villingen, Southern Germany and each unit is tested against the most demanding of tolerances, as part of the company’s stringent quality assurance program.
Tecnical Data
Components Nominal music power Frequency response (IEC) Sensitivity Nominal impedance Weight Dimensions
Product article number Re:sound H190 in veneer cherry 1.084.540.00 Re:sound H190 in silver varnished 1.084.541.00
Dominating Entertainment. Revox of Switzerland.
4x154mm woofers, 1x154mm midrange, 25mm tweeter calotte 180 / 220 watts 28 Hz – 40kHz 87dB (1 W / 1m) 4 Ohm
38.5 kg Housing including pedestal 1940mm Housing width 180mm Housing depth 250mm Pedestal measuements (width x depth) 395x295mm
is
This all called for some new developments:
1. Bass range: 4 new, long-throw base drivers with powerful
magnets and durable membranes made of high-strength, black anodised aluminium. Short-circuit rings with internal magnets prevent distortion very effectively.
2. 154 mm mid-range system with hand-coated paper membranes
and linear, low-distortion magnets.
3. Broad, 25 mm soft calottes in the treble range, which reach far
beyond the audibility limit.
4. Unusually extensive, over-dimensioned, low-distortion crossover
network with high-specification components.
5. Vibration-optimised and internally reinforced housing. The result
is that no sound discolouration caused by partial oscillation of the housing is audible.
High-quality speaker connections reduce unwanted contact resistance and other interference to an absolute minimum.
Dominating Entertainment. Revox of Switzerland.
Loading...