Further information, including details
of Revox Multiroom, Loudspeaker
Systems and Plasma Screens can be
found under www.revox.ch.
Amplifier S 25
• Sinus power (4Ω) 2 x 60 W
• Output impedance 0.1 Ω/ 1 kHz
• Frequency response (40W / 8Ω) 20 Hz - 30 kHz
• Input sensivity / impedance:
CD 280 mV / 47.5 kΩ
PHONO 18 mV / 47.5 kΩ
• Outputs: Level/impedance
Tape/Monitor 120Ω/ 0 dB
Max. distortion (20 Hz / 20 kHz) < 0.1 %
Signal-to-noise-ratio > 90 dB
• Power supply
Power consumption 220 W
Main fuse 1.6 A / 250 V (slow-blow)
• Weight 6.5 kg
FM-Tuner S 26
• Frequency response 87.5 - 108 MHz
• Input sensivity (75 Ω):
mono, 26 dB S/B 1.1µV
stereo, 50 dB S/B 45µV
• Selectivity 60 dB at 300 kHz
• Max. distortion mono < 0.5 %
• Max. distortion stereo < 0.7 %
• Frequency response (+ 1.5 dB) 30 Hz - 15 kHz
• Signal-to-noise-ratio
(Mono/Stereo) 74 dB / 70 dB
• Power supply
Power consumption 10 W
Main fuse 200 mA / 250 V (slow-blow)
• Weight 4.0 kg
CD-Player S 22
• Frequency response (0/-0.5 dB) 20Hz-20kHz
• Linearity at -90 dB < 1.5 dB
• Signal-to-noise-ratio + THD < -80 dB at 1 kHz
• Channel seperation > 100 dB at 1 kHz
• Digital conversion 5 bit / 128 Fs
• Output level 2 Vrms
• Output impedance 200 Ω
• Power supply:
Power consumption 11 W
Main fuse 160 mA / 250 V (slow-blow)
• Weight 4.0 kg
Processor S 20
• Nominal power output:
Centre channel 60 W into 4 Ω
Rear channels 60 W into 4 Ω
Output impedance <0,1 Ω at 1 kHz
• Harmonic distortion:
All outputs < 0.1 % (THD)
• Inputs:
Analogue AN-1, AN-2
Input level max. 2 V
A/D conversion 20-bit converter
• Digital COAX-1, COAX-2 (electrical)
OPTO-1, OPTO-2 (optical)
Input format IEC 1937
Input frequencies 32 kHz; 44,1 kHz; 48 kHz
• Outputs:
Analogue front left, front right, Active Bass
D/A conversion 6 x 20 bit
Impedance 600 Ω
Amplification 14 dB (front), 24 dB (Active Bass)
Maximum output level 5 V
• Signal-to-noise-ratio:
At nominal input level > 85 dB
• Frequency response:
40 W, 8 Ω 20 Hz - 30 kHz
• Line voltage: 230 V AC (50..60 Hz)
• AC power fuse: T 1,6 A
• Power consumption:
Maximum 220 W
Operation 25 W
Standby 9 W
• Weight 6,5 kg
DVD-Player S 27
• Playback system:
DVD Video (Single and Dual-Layer); Video CD; Audio CD, HDCD-Encoded
Audio CD (incl.CD-R und CD-RW)
DVD disc Format:
Playing time 1-Layer 2.15 h
(12 cm) 2-Layer 4.00 h
1-Layer two-sided 4.30 h
2-Layer two-sided 8.00 h
• TV Standards:
Multistandard PAL (Europe) 50 Hz/625 Lines
NTSC (USA) 60 HZ/525 Lines
• Videosignals:
CVBS 1 Vpp into 75 Ω
S-Video Y: 1 Vpp into 75 Ω
C: 300 mVpp into 75 Ω
YUV Y Out: 1V p-p /75 Ω
U Out: 0.7V p-p /75 Ω
V Out:0.7V p-p /75 Ω
• Audio Formats:
MPEG-2,AC-3,dts Compressed Digital
PCM 16,20,24-Bit
44.1,48,96 kHz sampling rates
Analog sound Stereo Dolby-Pro-Logic
• Connectors:
CVBS (Video) Cinch (RCA)
S-Video Mini DIN,4 pins (Hosiden)
YUV 3 x Cinch (RCA)
Audio L/R 2 x Cinch (RCA)
Digital Output 1 x koaxial,Cinch (electrical)
(24-Bit,96 kHz) 1 x Toslink (optical)
• Power inlet: 100 -240 V /50 -60 Hz
• Power consumption:
Max. 22 W
Operation 15 W typ.
Standby 4 W
• Weight 3,1 kg
Art.-Nr. 10.29.6023 · www.workid.de
Specifications subject to change without notice.
MR-Controller S 29
• Connectors:
FM IN/OUT Cinch Audio
CD IN/OUT Cinch Audio
AUX 1 IN/OUT Cinch Audio
AUX 2 IN/OUT Cinch Audio
• CD IR Signal,3.5 mm phone-plug
• FM IR Signal,3.5 mm phone-plug
• AMP IR Signal,3.5 mm phone-plug
• Multiroom 9-pol Sub-D
• Power supply: 100/117/230 V /50 -60 Hz
• Power consumption:
Operation 2,5 W
• Weight 2,7 kg
General Data
• Operating conditions:
(complies with DIN 40040) + 10 ... 40°C
• Dimensions (H x W x D in mm) 430 x 265 x 70