Revo R4CH12VAMP User Manual

Please read this manual thoroughly before use, and keep it handy for future reference.

1. Video OUT

The RJ-11 DVR connector is used to connect a DVR to the Camera for recording

2. DC Power Signal Checker LED

The LED Illuminates "Green" when there is an input 12Vdc Power (From DVR)

The R4CH12VAMP Line Amplifier allows you to transmit video signals over 300ft distances by
amplifying the video signal from the camera to the DVR.
Please read the following instructions to correctly set up your line amplifier.

- Camera signal Checker LED

- Line DC Voltage Checker LED

- 300ft Video & Camera DC Power AMP

FEATURES

OPERATING INSTRUCTION

1. LED

A green indicator lights when the power is ON

2. DC JACK
Place the plug from the supplied table-top power supply into the DC 12V connector.

3. Video Signal Checker LED

The LED Illuminates "Green" when there is an input Video signal (From camera)

4. Camera INPUT

Four cameras can be connected to the AMP using the RJ-11 connections labeled CAM1, CAM2,
CAM3 and CAM4.

Front )

Rear )

The R4CH12VAMP is a 4-channel audio/video interface permitting connection from up to four modular
6-pin type (RJ-11) cameras directly to a 4-channel digital video recorder (DVR). The interface provides
breakout of the RJ-11 video, audio and power to separate connections.

CONNECTIONS

Supplied item

AMP
Power supply unit (DC 12V) / Power cord
Operating instructions manual

SPECIFICATION

1
2

3
4
5

6

7

8

9

10
11

12
13
14

Video Mode
Power Requirement

Power Consumption
Input Signal
Video Amplifier (Gain Fixed AMP)

Impedance

Input Signal

Output Signal

User Controls

Maximum Wiring Distance
Ambient Temperature

Ambient Humidity
Weight
Dimensions

NTSC & PAL
AC110 ~ 230V, 50/60Hz±1Hz, Free Voltage
(110Vac 0.22A/ 230Vac 0.14A)
12V 0.9A max (4 Camera IR Active)
Composite Video Signal (from Camera)
Weak Signal 0.9Vp-p (used 300ft cable)
1 Vp-p
75 ohm
75 ohm
RJ-11 x 4
Video Sync (Green Light )
RJ-11 x 4
DC Voltage (Green Light)
CA1~4 Jack (LED x 4) / DC Power Jack (LED)
Video 1~4 Jack (LED x 4)
90m (300 ft.) for Multi Cable

95%

0.35 kg
166(W) × 30(H) × 92.2(D)mm
275(W) × 55(H) × 240(D)mm

-30℃ to + 70℃ (-22℉~158℉)

-10℃ to + 45℃ (14℉~113℉)

INPUT
OUTPUT
INPUT
OUTPUT
Connecter
Checker source
Connecter
Checker source
Front
Rear

Storage/Transport
Operating

Net
Packing

ITEM

No.

SPECIFICATION

Modular Cable

Modular Cable

Power

Adapter

AMP

R14CH12VA

VIDEO OUT 1~4

CAM1~4

DVR

MEMO

FCC COMPLIANCE STATEMENT

CAUTION : CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE

MANUFACTURED COULD VOID THE USER'S AUTHORITY TO OPERATE THE EQUIPMENT.

THIS CLASS A DIGITAL APPARATUS COMPLIES WITH CANADIAN ICES-003.

CET APPAREIL NUMERIQUE DE LA CLASSE A EST CONFORME A LA NORME NMB-003 DU
CANADA.

FCC INFORMATION : THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY
WITH THE LIMITS FOR A CLASS A DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC
RULES. THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTION AGAINST
HARMFUL INTERFERENCE WHEN THE EQUIPMENT IS OPERATED IN A COMMERCIAL
ENVIRONMENT. THIS EQUIPMENT GENERATES, USES, AND CAN RADIATE RADIO
FREQUENCY ENERGY AND IF NOT INSTALLED AND USED IN ACCORDANCE WITH THE
INSTRUCTION MANUAL, MAY CAUSE HARMFUL INTERFERENCE TO RADIO
COMMUNICATIONS. OPERATION OF THIS EQUIPMENT IN A RESIDENTIAL AREA IS LIKELY
TO CAUSE HARMFUL INTERFERENCE IN WHICH CASE THE USER WILL BE REQUIRED TO
CORRECT THE INTERFERENCE AT HIS OWN EXPENSE.

WARNINGS AND CAUTIONS

CAUTION

CAUTIONCAUTION

RISK OF ELECTRIC SHOCK
DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER(OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

EXPLANATION OF GRAPHICAL SYMBOLS

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to
alert the user to the presence of uninsulated "dangerous voltage" within the product's
enclosure that may be of sufficient magnitude to constitute a risk of electric shock to
persons.

The exclamation point within an equilateral triangle is intended to alert the user to the
presence of important operating and maintenance (servicing) instructions in the literature
accompanying the product.

Should any liquid or solid object fall into the
cabinet, unplug the unit and have it checked by
the qualified personnel before operating it any
further.

Unplug the unit from the wall oulet if it is not
going to be used for several days or more. To
disconnect the cord, pull it out by the plug. Never
pull the cord itself.

Allow adequate air circulation to prevent internal
heat build-up. Do not place the unit on surfaces
(rugs, blankets, etc.) or near materials(curtains,
draperies) that may block the ventilation holes.

Height and vertical linearity controls located at
the rear panel are for special adjustments by
qualified personnel only.

Do not install the unit in an extremely hot or
humid place or in a place subject to excessive
dust, mechanical vibration.

The unit is not designed to be waterproof.
Exposure to rain or water may damage the unit.

Clean the unit with a slightly damp soft cloth.
Use a mild household detergent. Never use
strong solvents such as thinner or benzine as
they might damage the finish of the unit.

Retain the original carton and packing materials
for safe transport of this unit in the future.

Safety -------------------------------------------- Installation -------------------------------------

Cleaning -----------------------------------------

PRECAUTIONS

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO
RAIN OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECTS THROUGH THE VENTILATION
GRILLS OR OTHER OPENINGS ON THE EQUIPMENT.

PRECAUTIONS AND IMPORTANT SAFEGUARDS

1. READ INSTRUCTIONS All of the safety and operating instructions should be read before the
appliance is operated.

2. RETAIN INSTRUCTIONS The safety and operating instructions should be retained for future
reference.

3. HEED WARNINGS All warnings on the unit and in the operating instructions should be adhered to.

4. FOLLOW INSTRUCTIONS All operating and use instructions should be followed.

5. CLEANING Unplug the unit from the outlet before cleaning. Do not use liquid cleaners or aerosol

cleaners. Use a damp cloth for cleaning. See cleaning procedures under Maintenance.

6. ATTACHMENTS Do not use attachments not recommended by the product manufacturer as they
may result in the risk of fire, electric shock, or injury to persons.

7. WATER AND MOISTURE Do not use this unit near water or in an unprotected outdoor installation,
or any area which is classified as a wet location.

8. ACCESSORIES Do not place this product on an unstable cart, stand, tripod, bracket, or table.
The product may fall, causing serious injury to a child or adult and serious damage to the equipment.
Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with
the product. Any mounting of the product should follow the manufacturer's instructions and should
use a mounting accessory recommended by the manufacturer. Wall or shelf mounting should follow
the manufacturer's instructions and should use a mounting kit approved by the manufacturer.

9. A product and cart combination should be moved with care. Quick stops, excessive
force, and uneven surfaces may cause the product and cart combination to overturn.

10. VENTILATION Slots and openings in the cabinet and the back or bottom are provided for
ventilation and to ensure reliable operation of the equipment and to protect it from overheating.
These openings must not be blocked or covered. The openings should never be blocked by placing
the product on a bed, sofa, rug, or other similar surface. Equipment should never be placed near
or over a radiator or heat register. This product should not be placed in a built-in installation, such
as a bookcase or rack unless proper ventilation is provided or the manufacturer's instructions have
been adhered to.

11. POWER SOURCES This product should be operated only from the type of power
source indicated on the marking label. If you are not sure of the type of power
supplied to your home, consult your product dealer or local power company. For
products designed to operate from battery power or other sources, refer to the
operating instructions.

12. GROUNDING OR POLARIZATION The power supply supplied with this unit may be equipped with
a polarized alternating-current line plug (a plug having one blade wider than the other). This plug
will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the
plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your
electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.
Alternately, this unit may be equipped with a 3-wire grounding-type plug, a plug having a third
(grounding) pin. This plug will only fit into a grounding-type power outlet. This is a safety feature.
If you are unable to insert the plug into the outlet, contact your electrician to replace your obsolete
outlet. Do not defeat the safety purpose of the grounding-type plug.

13. OVERLOADING Do not overload outlets and extension cords as this can result in a risk of fire or
electric shock.

Please read this manual thoroughly before use, and keep it handy for future reference.