Revo ELITE RETRT2812-1 User Manual
Operating Manual
USER'S INSTRUCTIONS
Model No.: RETRT2812-1
(DC 12V
/AC 24V ~ 60HZ, 12W / NTSC)
REVO AMERICA
700 FREEPORT PARKWAY SUITE 100 COPPELL,
TX 75019 U.S.A. TEL.: 1-866-625-REVO(7386)
USER’S MANUAL
2
USER’S MANUAL
Contents
• General Features
4
• Installing & Adjusting
5
• Dimension & Specification
6
• OSD Control Button
7
•
Camera Menu Set Up
1. Menu Set Up
8
2
.
Lens Setting
8
3
.
Exposure Setting
9
4
.
White Balance Setting
10
5
.
SSDR Setting
11
6
.
Backlight Setting
12
7
.
DNR3 Setting
13
8
.
Day/Night Setting
14
9
.
Special Setting
15
10
.
Exit Setting
19
• Trouble Shooting
20
3
USER’S MANUAL
General Features
•
Ultra High Sensitivity
- The built-in high sensitivity COLOR CCD produces a clear image even in 0Lux(B/W, IR-LED ON)
or lower illumination.
•
600TV Lines
- By adopting a diagonal 2.8mm(1/3") 410,000 (NTSC) pixel, 470,000(PAL) pixel SONY CCD,
the camera produces clear picture quality with a horizontal resolution of 600 TV lines for
color and a horizontal resolution of 700TV lines for BW mode.
•
DNR3
-
The high-performance W-V DSP chip effectively removes low-light gain noise and
ghosting to
provide clear images even in dark environments.
•
Day & Night
- This camera has a function that automatically selects the mode that is appropriate for
daytime or night-time conditions. The COLOR mode operates in daytime conditions to
provide optimum colors, and BW mode operates in night-time conditions to enhance the
definition of the image.
•
SSDR
- For images with high contrast between bright and dark Areas from difficult lighting conditions
such as backlighting, this camera selectively illuminates darker Areas while retaining the same
light level for brighter Areas to even out the overall brightness.
•
Miscellaneous Functions
- HLC(High Light Compensation), SENS-UP, FLIP(H/V-REV), D-ZOOM, SHARPNESS, MOTION
DETECTION and PRIVACY functions are provided.
•
Disk Saving Effects
- Up-most and advanced DNR technology camera picture quality has a disk saving effects due
to
Image sizes are smaller than standard CCTV camera image.
•
Controlled by OSD Menu
- The camera can be controlled by selecting the menu text displayed on the monitor screen.
•
IP66 Approved / Vandal Proof / RoHS Compliance
- To prevent from external strong impact. It has a high strength and durable exterior material of die
cast aluminum body. It also has designed to prevent from shock, dust and rain resistant. The
turret camera has designed to install anywhere even at exterior places.
4
USER’S MANUAL
INSTALLING & ADJUSTING
1. Installation
- Place the mounting plate on a flat installation surface
and mount with the provided screws.
- Feed the cable through the center of the mounting plate.
- Place the camera body in the mounting plate socket
and hold.
- Then place the outer plate over the camera body &
mounting plate and tighten side screws to lock the
camera into place.
- Loosen side screws to adjust camera angle as needed,
then tighten the side screws to lock into place.
2. Focus/Zoom Screw
- To widen the viewing angle turn the Zoom screw
to "W"(Wide) to obtain a closer view turn it to
"T"(Tele)
- Turn the Focus screw to "N"(Near) or ""
(Far) until the sharpest Focus is made.
5
USER’S MANUAL
1. Dimension & Connection
2. Specification
Image Pick-Up Device
1/3” Sony Super HAD CCD
TV System
NTSC
Tot a l Pix e ls
811(H) * 508(V)
768(H) * 494(V)
Scanning Frequency
15.734KHz(H) & 59.94Hz(V )
Scanning System
2:1 Interlace
Synchronization
Internal / Line Lock
Resolution
600TV Lines
Minimum Illumination
IR LED OFF: 0.15 Lux, IR LED ON: 0.00002 Lux
S/N Ratio
More than 52dB
Video Output
CVBS: 1.0Vp-p / 75
Electronic Shutter Speed
NTSC=(1/60sec~1/120,000sec) / PAL=(1/50sec~1/120,000sec)
OSD
Available
SSDR
On / O Level adjustable)
BLC
BLC / HLC / OFF
Day & Night
Color / BW / AUTO
Gain Control
Low / High /
White Balance
ATW / Outdoor / Indoor / Manual / AWC (1,700°K ~ 11,000°K)
SENS-UP
Auto / O
Selectable x2 ~ x512)
Motion Detection
On / O Programmable Zones)
Privacy Masking
On / O
Programmable Zones)
DNR3 (Digital Noise Redu ction)
On / O Level adjustable)
Digital Zoom
On / O x1 ~ x16)
DIS (Digital Image Stabilization)
On /
Sharpness
On / O Level adjustable)
Flip / Mirror On /
Power Supply
DC 12V / AC 24V Dual Voltage
Power Consumption
IR LED OFF 200mA(DC), IR LED OFF 70mA(AC) / IR LED ON 670mA(DC), IR LED ON 240mA(AC)
Lens
DC Auto Iris Varifocal Lens(2.8mm-12mm)
Operational Temp
.
-10 ~ +50 Deg C. RH95% MAX.
Storage Temp
.
-20 ~ +60 Deg C. RH95% MAX.
Dimension
140mm(W) * 111mm(H) * 180mm(D)
Weight
1800g
6
DIMENSION & SPECIFICATION
Dimension
140mm
Connection
USER’S MANUAL
OSD Control Button
1. OSD button could be used when it needs to OSD control.
Up button: Moves the cursor upwards. Use this button to select an item
or adjust the parameters.
Down button: Moves the cursor downwards. Use this button to select an
item or adjust the parameters.
•
Left button: Moves the cursor to the left. Use this button to select or
adjust the parameters of the selected item. The parameter changes
each time this button is pressed.
•
Right button: Moves the cursor to the right. Use this button to select or
adjust the parameters of the selected item. The parameter changes each
time this button is pressed.
•
Set button: Executes selections and displays a submenu for an item with
the
mark.
7
Loading...