Revo CW-SR1000 User manual

CW-SR1000

Shoulder Support Rig

Counterweight

Thank you for choosing Revo, and congratulations on
your purchase of the Revo CW-SR1000 Counterweight
for the SR-1000 Shoulder Support Rig.

The Revo CW-SR1000 is a unique accessory for use with
the SR-1000 Shoulder Support Rig. It adds a
counterweight to the back of the Shoulder Support Rig that
increases stability, relieves arm fatigue, and creates a more
balanced system for easier maneuvering and handling of
fully-loaded or front-heavy camera setups.

The CW-SR1000 provides everything necessary for easy
attachment.

Components

4 Allen Screws

Angled

mounting

plate

Counterweight

with threaded holes

Hex key

Warnings

• Please read and follow these instructions, and

keep this manual in a safe place.

• Handle the unit with care.

• Clean the unit with a soft, dry cloth.

• Use only parts provided by the manufacturer.

• Make sure everything is secure before proceeding.

• Make sure the item is intact and that there are no

missing parts.

• All photos are for illustrative purposes only.

Attaching the CounterWeight to the SR-1000 Shoulder
Support Rig

Align the screw holes in the narrow end of the angled

1

mounting plate with the slot on the outside of the
shoulder pad.

Attach the mounting plate by threading two of the

2

included hex screws through the slot and into the
screw holes. Use the included hex key to fasten the
screws until fully tightened.

Align the counterweight’s screw holes with the

3

corresponding screw holes on the outside of the
mounting plate.

Attach the counterweight by threading the remaining

4

two screws through the mounting plate and into the
counterweight. Use the hex key to fasten the screws
until fully tightened.

Important: The screws should go easily into the holes of the
counterweight. If you feel resistance when turning the
screws, turn the counterweight over and repeat the
previous instruction.

Specifications

Weight: 5.1 lb. (2.3 kg)

Length: 6.1” (15.4 cm)

Width: 3.3” (8.5 cm)

Height: 0.9” (2.5 cm)

One-Year Limited Warranty

This Revo product is warranted to the original purchaser
to be free from defects in materials and workmanship
under normal consumer use for a period of one (1) year
from the original purchase date or thirty (30) days after
replacement, whichever occurs later. The warranty
provider’s responsibility with respect to this limited
warranty shall be limited solely to repair or
replacement, at the provider’s discretion, of any product
that fails during normal use of this product in its
intended manner and in its intended environment.
Inoperability of the product or part(s) shall be
determined by the warranty provider. If the product has
been discontinued, the warranty provider reserves the
right to replace it with a model of equivalent quality and
function.

This warr

anty does not cover damage or defect caused
by misuse, neglect, accident, alteration, abuse,
improper installation or maintenance. EXCEPT AS
PROVIDED HEREIN, THE WARRANTY PROVIDER
MAKES NEITHER ANY EXPRESS WARRANTIES NOR
ANY IMPLIED WARRANTIES, INCLUDING BUT NOT
LIMITED TO ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE. This warranty provides you
with specific legal rights, and you may also have
additional rights that vary from state to state.

To obtain warranty coverage, contact the Revo
Customer Service Department to obtain a return
merchandise authorization (“RMA”) number, and return
the defective product to Revo along with the RMA
number and proof of purchase. Shipment of the
defective product is at the purchaser’s own risk and
expense.

For more information or to arrange service, visit
www.revocinegear.com or call Customer Service at
212-594-2353.

TM

REVO

A Gradus Group Brand

Revo is a registered trademark of the Gradus Group.

© 2014 Gradus Group LLC. All Rights Reserved.

www.GradusGroup.com

GG2