REVELL Performa C50, Performa C50a Owner's Manual

Revel®Performa™C50a Loudspeaker
3 Oak Park, Bedford, MA, 01730-1413 USA | Telephone: 781-280-0300 | Fax: 781-280-0490 | www.revelspeakers.com
Customer Support: Telephone: 781-280-0300 | Sales Fax: 781-280-0495 | Service Fax: 781-280-0499
Please contact Customer Support for information about product shipments.
Revel Performa C50a Loudspeaker
Owner’s Manual
®
“Revel,” “Performa,” and the Revel logo are registered trademarks of Harman International Industries. U.S. patent numbers and other worldwide patents issued and pending.
©2004 Harman Specialty Group. All rights reserved.
This document should not be construed as a commitment on the part of Harman Specialty Group.The information it contains is subject to change without notice. Harman Specialty Group assumes no responsibility for errors that may appear within this document.
TABLE OF CONTENTS
INTRODUCTION...............................................3
ABOUT THE MANUAL AND WARRANTY.................................3
PRODUCT REGISTRATION...................................................4
DESCRIPTION .................................................4
WOOFERS ........................................................................4
MIDRANGE .......................................................................5
TWEETER .........................................................................5
CROSSOVER NETWORK .....................................................5
CABINET...........................................................................6
UNPACKING....................................................7
ADJUSTABLE SPIKE FOOTING...........................9
PLACEMENT .................................................11
CONNECTIONS..............................................13
SYSTEM OPTIMIZATION..................................14
LOUDSPEAKERS AND POWER........................16
SPECIFICATIONS............................................17
OBTAINING SERVICE......................................18
2
REVEL PERFORMA C50a
Owner’s Manual
Figure 1. The Revel
Performa C50a
center-channel loudspeaker.
INTRODUCTION
The Revel Performa C50a center-channel loudspeaker draws upon the same research, resources, and unique perspective made famous by Revel’s Ultima™ Series, resulting in standard-setting low col­oration and freedom from distortion over an extraordinarily wide dynamic range.
The C50a loudspeaker provides this exceptional performance in a wide range of applications (through the use of placement compen­sation circuits) and uniformly throughout a wide listening area. Individually hand-tuned crossovers assure that this loudspeaker will produce the same extraordinary sound quality as the original refer­ence standard, and an ideal timbre match to Revel left and right front loudspeakers. Its superior performance, validated by objective listening tests, will greatly enhance the enjoyment of music or film sound in your home.
ABOUT THE MANUAL AND WARRANTY
To begin enjoying your new loudspeaker, first read and then perform the instructions in this owner’s manual. Maximum performance depends on following all instructions described here, as well as those found in the owner’s manuals of associated components in your audio system. Save these instructions for future reference.
The C50a center-channel loudspeaker is covered by a limited 5­year warranty, so save the bill of sale to protect your purchase and aid in any service-related questions.
3
REVEL PERFORMA C50a
Owner’s Manual
Figure 2. The Revel Performa C50a transducer and connection locations.
DESCRIPTION
The Revel Performa C50a loudspeaker uses two 6.5-inch (165mm) ceramic-composite woofers, a 4-inch (102mm) ceramic-composite midrange, and a 1-inch (25.4mm) aluminum-dome tweeter.
Combined with an individually-optimized crossover network, this transducer arrangement provides a uniform “listening window” or area in which the sound varies little. The dual high power-handling woofers and high-order crossover networks assure an extraordinary dynamic range capability with very low dynamic compression. Full magnetic shielding allows use near a video monitor.
WOOFERS
The two 6.5-inch (165mm) woofers feature:
• 1.2-inch (30.5mm) diameter voice coils wound on glass-rein­forced Kapton
®
bobbins for outstanding dynamic capability and
freedom from compression.
• Ceramic-composite cones feature an optimum combination of stiffness and low mass for low coloration and distortion, and fully-pistonic operation throughout their entire operating range.
•Massive motor system and specially vented spiders for high-power handling and low dynamic compression.
•Die-cast basket to eliminate coloration from resonances.
4
REVEL PERFORMA C50a
Owner’s Manual
On Top of Monitor
Flush
Mounted
Stand Mounted
0
+.5
-.5
+1
-1
Placement Compensation (See Owner's Manual)
High Frequency Level (dB)
Revel Northridge, California Made in U.S.A.
Serial No.
REVEL PERFORMA
C50a Front (without grille)
REVEL PERFORMA
C50a Rear
Woofer
Tweeter
Woofer
High-Frequency Level Control
Placement
Compensation
Control
Midrange
Connector Connector
PRODUCT REGISTRATION
Please register the C50a within 15 days of purchase. To do so, register online at www.revelspeakers.com or complete and return the included product registration card. Retain the original, dated sales receipt as proof of warranty coverage.
MIDRANGE
The 4-inch (102 mm) midrange features:
• 1-inch (25.4mm) diameter voice coil on a glass-reinforced Kapton
®
former for extraordinary power handling and freedom
from distortion.
• Ceramic-composite cones feature an optimum combination of stiffness and low mass for low coloration and distortion, and fully-pistonic operation throughout its entire operating range.
•Specially-shaped, synthetic and natural butyl-rubber composite surround contributes to low coloration and distortion.
•Die-cast basket to eliminate coloration from resonances.
TWEETER
The 1-inch (25.4mm) tweeter features:
•A pure titanium dome for fully-pistonic operation.
•Integrated, cast heat sink for high-power handling and low dynamic compression.
•Telar 57
, low-carbon high-saturation steel pole, backplate,
and top plate for low distortion.
CROSSOVER NETWORK
The Revel Performa C50a crossover network is designed to seam­lessly integrate the transducers over a wide listening area, and to compensate for a wide range of listening environments. The crossover features:
•A 3-way, high-order crossover at 260Hz and 2.1kHz for high power handling, optimized dispersion, and freedom from distortion and dynamic compression.
•Individual calibration to match each Revel Performa C50a to the original reference standard.
• 3-position placement compensation switch for low coloration under a wide range of conditions.
• Calibrated, five-position, high-frequency level control for accurate, repeatable settings.
•Separate woofer, midrange, and tweeter crossover boards to eliminate any distortion-causing interaction.
5
REVEL PERFORMA C50a
Owner’s Manual
CABINET
Minimizes cabinet-induced colorations with 0.75-inch (19mm) thick walls and extensive internal bracing. For even greater sound enhancement, rounded baffle edges minimize diffraction and optimize treble response. Two threaded inserts on the bottom of the cabinet accommodate spike footing, which provides adjustable tilt when the C50a is placed on or above a video monitor.
The cabinet’s wood veneer finish does not require routine mainte­nance. However, cabinet surfaces that have been marked with fin­gerprints, dust, or other dirt can be cleaned using a soft cloth and a high-quality furniture polish. If a higher-gloss finish is desired, a high-quality wax can also be used.
To clean the cabinet:
1. Apply a high-quality furniture polish to a soft cloth.
2. Use the cloth to lightly wipe the cabinet surface.
To clean the grille:
Gently vacuum using a soft-bristled brush vacuum attachment.
CAUTION:To prevent cabinet damage, do not use a cloth made with steel wool or metal polish to clean the cabinet. To prevent possible transducer damage, do not apply furniture polish directly to the cabinet.
6
REVEL PERFORMA C50a
Owner’s Manual
WARNING
Loading...
+ 14 hidden pages