REVELL 2004 Corvette Coupe User Manual [en, fr, nl, it, gr, da, no, fi, sv, es, pt, de, en, hr, et, fi, hu, lv, lt, nl, pl, ro, ru, sr, sk, sl, cs, tr, gr, bg, uk, ch, he, ar, ja, ch, ch, ko, hi, id, kk, ms, fa, pt, es, th, vi, sq, mk]
KIT 1927 85192700200
Step 14Step 13
PASSENGER
SIDE WHEEL &
TIRE ASSEMBLY
FROM STEP 11
DRIVER
SIDE WHEEL
& TIRE
ASSEMBLY
FROM
STEP 12
16
SIDE MIRROR
Step 15 Sticker Placement Guide
15
SIDE MIRROR
®
Completed
2004 Corvette
Coupe
Assembly
ANY UNUSED PARTS MAY BE DISCARDED
Parts Included
3
13
10
11
When applying stickers, avoid touching the “sticky” side to prevent finger prints on stickers. Bend sticker sheet slightly to lift edge of sticker & use a fingernail to lift
sticker from sheet. Line up sticker on body and press an edge into place, slowly working sticker with a finger nail until sticker is fully on model.
Pendant l’application des autocollants, éviter de toucher à la face collante pour ne pas laisser d’empreintes. Plier légèrement la feuille d’autocollants pour relever le
bord d’un autocollant, et le détacher de la feuille avec le bout d’un ongle. Aligner l’autocollant sur la carrosserie, appuyer pour coller un de ses bords, et continuer de
l’appliquer lentement du bout de l’ongle jusqu’à ce qu’il soit complètement collé sur le modèle réduit.
NOTE:
REMARQUE :
4
9
9
16
15
METAL AXLES
& SCREWS
27
8
10
25
14
26
BODY
21
22
160
180
5
2
• CLEAR A SPACE TO WORK ON
20
170
150
• STUDY THE ASSEMBLY DRAWINGS
BEFORE YOU BEGIN
• EACH PLASTIC PART IS IDENTIFIED BY A
PART NUMBER
• DO NOT OVER TIGHTEN SCREWS
• SEE NOTE ABOUT APPLYING STICKERS
IN STEP #15
POSITION ALL PARTS IN THIS KIT
CAREFULLY. PARTS WILL ONLY SNAP
If you have any questions or commen ts, c all o ur ho tline at:
* REMOVE AND THROW AWAY
* A RETIRER ET JETER
* REPEAT SEVERAL TIMES
* A REPETER PLUSIEURS FOIS
READ BEFORE YOU BEGIN
CAUTION:
TOGETHER ONCE.
• DÉGAGGEZ UN ESPACE POUR
TRA-VAILLER.
• ÉTUDIEZ LES ÉTAPES DE MONTAGE
AVANT DE COMMENCER.
• CHAQUE PIÉCE EN PLASTIQUE PORTE
UN NUMÉRO DE PIÉCE.
• NE SERREZ PAS TROP LES VIS.
• LISEZ LA RE MARQUE CONCERNANT
L ´APPLICATION DES AUTO COLLANTS,
´A L´ ÉTAPE 15.
POSITIONNEZ AVEC PRÉCAUTION TOUTES
LES PIÉCES DE CE MODÉLE RÉDUIT, CAR
VOUS NE POUVEZLES EMBOîTER QU’UNE
* OPTIONAL PARTS
* PIECES EN OPTION
* APPLY STICKERS
*APPLIQUEZ LES AUTO-COLLANTS
Á LIRE AVANT DE COMMENCER
MISE EN GARDE:
SEULE FOIS.
(800) 833-3570
or, please write to:
Revell-Monogram Consumer Service Department, 725 Landwehr Road,
Be sure to include the plan number (85192700200), part number, description,
Visit our website: www.revell-monogram.com
REVELL-MONOGRAM, LLC Northbrook, IL. Copyright © 2003. All rights reserved.
Northbrook, Illinois 60062
your return address and phone number.
Step 1
5
DASHBOARD
Step 2 Step 4
9
SEAT FRONT
Step 3
11
SHIFTER
2
INTERIOR TUB
COMPLETED
DASHBOARD
ASSEMBLY
COMPLETED
SEAT
ASSEMBLIES
STEERING WHEEL
4
GAUGE STICKER
Step 5 Step 8
4
INNER DRIVER
SIDE DOOR
PANEL
8
3
INNER PASSENGER
SIDE DOOR PANEL
9
SEAT FRONT
Step 6
20
WINDOWS
(CLEAR)
10
SEAT BACK
10
SEAT BACK
PUSH WINDOWS DOWN INTO PLACE
Step 7
BODY
CLOSE UP OF
SHIFTER IN PLACE
REAR UNDERSIDE OF
INTERIOR TUB SHOWN
& SHIFTER ASSEMBLY
INTERIOR TUB
25
TAILLIGHTS
(TRANSPARENT RED)
Step 9
COMPLETED
INTERIOR TUB
ASSEMBLY
22
PARKING
LIGHT LENS
FRONT
SHORT SCREWS
Step 10 Step 11
LONG SCREWS
(CLEAR)
NOTE: DISK BRAKE (27),
FLAT SIDE FACES OUTWARD.
13
CHASSIS
27
DISK BRAKE
FRONT WHEEL
(CHROME)
REAR WHEEL
(CHROME)
FRONT
21
PARKING
LIGHT LENS
(CLEAR)
PASSENGER SIDE
Step 12
DRIVER SIDE
NOTE: DISK BRAKE (27),
FLAT SIDE FACES OUTWARD.
27
DISK BRAKE
14
NOTE: TIRES ARE DIRECTIONAL:
26
150, 160
PASSENGER
SIDE TIRE
150 PASSENGER SIDE FRONT
160 PASSENGER SIDE REAR
170 DRIVER SIDE REAR
180 DRIVER SIDE FRONT
170, 180
DRIVER
SIDE TIRE
14
FRONT WHEEL
(CHROME)
26
REAR WHEEL
(CHROME)
85192710200
Loading...