REVELL 1927 Assembly Manual
Step 15 Sticker Placement Guide
ANY UNUSED PARTS MAY BE DISCARDED
Completed
Assembly
9
METAL AXLES
& SCREWS
3
BODY
2
9
20
14
13
10
4
Step 14Step 13
Parts Included
10
11
8
5
26
22
21
25
DRIVER
SIDE WHEEL
& TIRE
ASSEMBLY
FROM
STEP 12
PASSENGER
SIDE WHEEL &
TIRE ASSEMBLY
FROM STEP 11
16
SIDE MIRROR
15
SIDE MIRROR
16
15
READ BEFORE YOU BEGIN
• CLEAR A SPACE TO WORK ON
• STUDY THE ASSEMBLY DRAWINGS
BEFORE YOU BEGIN
• EACH PLASTIC PART IS IDENTIFIED BY A
PART NUMBER
• DO NOT OVER TIGHTEN SCREWS
• SEE NOTE ABOUT APPLYING STICKERS
IN STEP #15
CAUTION:
POSITION ALL PARTS IN THIS KIT
CAREFULLY. PARTS WILL ONLY SNAP
TOGETHER ONCE.
Á LIRE AVANT DE COMMENCER
• DÉGAGGEZ UN ESPACE POUR
TRA-VAILLER.
• ÉTUDIEZ LES ÉTAPES DE MONTAGE
AVANT DE COMMENCER.
• CHAQUE PIÉCE EN PLASTIQUE PORTE
UN NUMÉRO DE PIÉCE.
• NE SERREZ PAS TROP LES VIS.
• LISEZ LA RE MARQUE CONCERNANT
L ´APPLICATION DES AUTO COLLANTS,
´A L´ ÉTAPE 15.
MISE EN GARDE:
POSITIONNEZ AVEC PRÉCAUTION TOUTES
LES PIÉCES DE CE MODÉLE RÉDUIT, CAR
VOUS NE POUVEZLES EMBOîTER QU’UNE
SEULE FOIS.
2004 Corvette
®
Coupe
If you h ave a ny qu estion s or comme nts, call our h otlin e at:
(800) 833-3570
or, please write to:
Revell-Monogram Consumer Service Department, 725 Landwehr Road,
Northbrook, Illinois 60062
Be sure to include the plan number (85192700200), part number, description,
your return address and phone number.
Visit our website: www.revell-monogram.com
* REPEAT SEVERAL TIMES
* A REPETER PLUSIEURS FOIS
* REMOVE AND THROW AWAY
* A RETIRER ET JETER
* APPLY STICKERS
*APPLIQUEZ LES AUTO-COLLANTS
* OPTIONAL PARTS
* PIECES EN OPTION
REVELL-MONOGRAM, LLC Northbrook, IL. Copyright © 2003. All rights reserved.
KIT 1927 85192700200
NOTE:
When applying stickers, avoid touching the “sticky” side to prevent finger prints on stickers. Bend sticker sheet slightly to lift edge of sticker & use a fingernail to lift
sticker from sheet. Line up sticker on body and press an edge into place, slowly working sticker with a finger nail until sticker is fully on model.
REMARQUE :
Pendant l’application des autocollants, éviter de toucher à la face collante pour ne pas laisser d’empreintes. Plier légèrement la feuille d’autocollants pour relever le
bord d’un autocollant, et le détacher de la feuille avec le bout d’un ongle. Aligner l’autocollant sur la carrosserie, appuyer pour coller un de ses bords, et continuer de
l’appliquer lentement du bout de l’ongle jusqu’à ce qu’il soit complètement collé sur le modèle réduit.
27
160
180
170
150
85192710200
5
DASHBOARD
10
SEAT BACK
11
SHIFTER
Step 2 Step 4
Step 5 Step 8
Step 10 Step 11
Step 1
Step 7
Step 12
8
STEERING WHEEL
4
GAUGE STICKER
9
SEAT FRONT
10
SEAT BACK
9
SEAT FRONT
REAR UNDERSIDE OF
INTERIOR TUB SHOWN
INTERIOR TUB
& SHIFTER ASSEMBLY
COMPLETED
DASHBOARD
ASSEMBLY
COMPLETED
SEAT
ASSEMBLIES
4
INNER DRIVER
SIDE DOOR
PANEL
3
INNER PASSENGER
SIDE DOOR PANEL
22
PARKING
LIGHT LENS
(CLEAR)
21
PARKING
LIGHT LENS
(CLEAR)
25
TAILLIGHTS
(TRANSPARENT RED)
COMPLETED
INTERIOR TUB
ASSEMBLY
13
CHASSIS
FRONT
LONG SCREWS
SHORT SCREWS
14
FRONT WHEEL
(CHROME)
26
REAR WHEEL
(CHROME)
Step 3
14
FRONT WHEEL
(CHROME)
26
REAR WHEEL
(CHROME)
150, 160
PASSENGER
SIDE TIRE
Step 9
CLOSE UP OF
SHIFTER IN PLACE
Step 6
20
WINDOWS
(CLEAR)
BODY
PUSH WINDOWS DOWN INTO PLACE
FRONT
170, 180
DRIVER
SIDE TIRE
NOTE: DISK BRAKE (27),
FLAT SIDE FACES OUTWARD.
27
DISK BRAKE
NOTE: DISK BRAKE (27),
FLAT SIDE FACES OUTWARD.
27
DISK BRAKE
NOTE: TIRES ARE DIRECTIONAL:
150 PASSENGER SIDE FRONT
160 PASSENGER SIDE REAR
170 DRIVER SIDE REAR
180 DRIVER SIDE FRONT
2
INTERIOR TUB
PASSENGER SIDE
DRIVER SIDE
Loading...