Renkforce RF-KB-ME0003 operation manual

Smart ID User Manual

Thank you for using the Smart ID product. This user manual will guide you to
adventure the wonderful features of the product.

1. How to install Smart ID software

Insert the Smart ID dongle.

Get the SmartIDInstaller software. Double click the execution file.

Follow the process of the installation step by step.

If you did not plug in the dongle, the following message will pop up. However, you
can choose “Ignore” to proceed.

After installation, the Smart-ID program will be launched. Also, you can find the

program link on desktop.

You can also find the program in the shortcut area after the program executed.

Main panel of the program.

If you have Chrome installed, the following Smart-IDWebAutoLogin program should
be install.

Please install and enable the addon program.

Attention: when the IE browser launched first time after installation, the following

message will pop up. Please choose “enable”.

Or, you can check the “Manage add-ons” by clicking the setting icon of IE.

Please make sure the WebAutoLoginBHO program has been activated.

2. How to enroll your fingerprint

Click the “Fingerprint Maintenance” function on the main panel.

Choose which finger you will enroll. For example, the middle finger.

Follow the instruction on the screen.