Renesas R0E521237CFK00 User Manual

Loading...

R0E521237CFK00

Converter Board for 48-pin 0.5-mm-pitch LQFP

User’s Manual

* NQPACK, YQPACK, YQSOCKET, YQ-GUIDE, HQPACK, TQPACK and TQSOCKET are trademarks of Tokyo Eletech Corporation.

Keep safety first in your circuit designs!

Renesas Technology Corporation and Renesas Solutions Corporation put the maximum effort into making semiconductor products better and more reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to personal injury, fire or property damage. Remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (i) placement of substitutive, auxiliary circuits, (ii) use of nonflammable material or (iii) prevention against any malfunction or mishap.

Notes regarding these materials

These materials are intended as a reference to assist our customers in the selection of the Renesas Technology product best suited to the customer's application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Renesas Technology Corporation, Renesas Solutions Corporation or a third party.

Renesas Technology Corporation and Renesas Solutions Corporation assume no responsibility for any damage, or infringement of any third-party's rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials.

All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of publication of these materials, and are subject to change by Renesas Technology Corporation and Renesas Solutions Corporation without notice due to product improvements or other reasons. It is therefore recommended that customers contact Renesas Technology Corporation, Renesas Solutions Corporation or an authorized Renesas Technology product distributor for the latest product information before purchasing a product listed herein. The information described here may contain technical inaccuracies or typographical errors. Renesas Technology Corporation and Renesas Solutions Corporation assume no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information published by Renesas Technology Corporation and Renesas Solutions Corporation by various means, including the Renesas home page (http://www.renesas.com).

When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. Renesas Technology Corporation and Renesas Solutions Corporation assume no responsibility for any damage, liability or other loss resulting from the information contained herein.

Renesas Technology semiconductors are not designed or manufactured for use in a device or system that is used under circumstances in which human life is potentially at stake. Please contact Renesas Technology Corporation, Renesas Solutions Corporation or an authorized Renesas Technology product distributor when considering the use of a product contained herein for any specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater use. The prior written approval of Renesas Technology Corporation and Renesas Solutions Corporation is necessary to reprint or reproduce in whole or in part these materials.

If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from the Japanese government and cannot be imported into a country other than the approved destination. Any diversion or reexport contrary to the export control laws and regulations of Japan and/or the country of destination is prohibited.

Please contact Renesas Technology Corporation or Renesas Solutions Corporation for further details on these materials or the products contained therein.

Precautions to be taken when using this product

This product is a development supporting unit for use in your program development and evaluation stages. In mass-producing your program you have finished developing, be sure to make a judgment on your own risk that it can be put to practical use by performing integration test, evaluation, or some experiment else.

In no event shall Renesas Solutions Corporation be liable for any consequence arising from the use of this product.

Renesas Solutions Corporation strives to renovate or provide a workaround for product malfunction at some charge or without charge. However, this does not necessarily mean that Renesas Solutions Corporation guarantees the renovation or the provision under any circumstances.

This product has been developed by assuming its use for program development and evaluation in laboratories. Therefore, it does not fall under the application of Electrical Appliance and Material Safety Law and protection against electromagnetic interference when used in Japan.

CAUTION

If the requirements shown in the "CAUTION" sentences are ignored,

the equipment may cause personal injury or damage to the products.

 

 

Renesas Tools Homepage http://www.renesas.com/en/tools

Rev.1.00

Dec. 01, 2005 (1/4)

REJ10J0849-0100

Renesas R0E521237CFK00 User Manual

1. Outline

The R0E521237CFK00 is a converter board for connecting the emulation probe R0E521000EPB00 and the compact emulator R0E521000CPE00 for R8C/Tiny Series to a foot pattern for 48-pin 0.5-mm-pitch LQFP (PLQP0048KB-A, formerly 48P6Q-A) of R8C/20, 21, 22, and 23 Groups.

2. Package Components (See Figure 1)

Table 1 Package Components

Item

Quantity

R0E521237CFK00

 

(Base board R0E521000CIF00 and 150mm

1 pc.

FFC cable included)

 

YQPACK048SD

1 pc.

(made by Tokyo Eletech Corporation)

 

NQPACK048SD

1 pc.

(made by Tokyo Eletech Corporation)

 

YQ-GUIDE

4 pcs.

(made by Tokyo Eletech Corporation)

 

R0E521237CFK00 User's Manual

1 pc.

(This manual)

 

3. Specifications

Table 2 Specifications

 

PLQP0048KB-A,

Applicable package

formerly 48P6Q-A

 

(48-pin 0.5-mm-pitch LQFP)

 

Between R0E521237CFK00 and

 

YQPACK048SD:

Insertion/removal

100 times guaranteed

iterations of

Between R0E521000EPB00 or

connector

R0E521000CPE00 and

 

R0E521237CFK00:

 

50 times guaranteed

4. Usage (See Figure 2)

The R0E521237CFK00 can be used for debugging and board mounted evaluation in common by mounting the NQPACK048SD on the user system.

(1)For debugging

Mount the NQPACK048SD and YQPACK048SD on the foot pattern of the user system in that order. And fix them with the YQ-GUIDE’s (do not use the screws included with the YQPACK048SD).

After connecting the R0E521000EPB00 or R0E521000CPE00 and R0E521237CFK00, connect the R0E521237CFK00 to the YQPACK048SD.

(2)For onboard evaluation

Mount an R8C/20, 21, 22 and 23 Groups MCU and HQPACK048SD (separately available) in that order on the NQPACK048SD on the user system. And fix them using a screw included with the HQPACK048SD.

Before using the R0E521237CFK00, be sure to read "7. Precautions" on page 4 and the R0E521000EPB00 or R0E521000CPE00 Users Manual.

R0E521237CFK00

YQPACK048SD NQPACK048SD YQ-GUIDE (x4)

Figure 1 Package components of the R0E521237CFK00

(1) Debugging

R0E521000EPB00 or R0E521000CPE00

R0E521237CFK00

(2) On-board evaluation

HQPACK048SD (separately available)

YQ-GUIDE (x4) *

MCU with on-chip

flash memory etc.

YQPACK048SD *

NQPACK048SD *

48-pin 0.5-mm-pitch (PLQP0048KB-A) foot pattern

: No. 1 pin

*: These products are included with the R0E521237CFK00 package.

Figure 2 Usage of the R0E521237CFK00

(2/4)

+ 2 hidden pages