H8/3854 Series
Expansion Board
(HS3854EIO60H)
for E6000 Emulator
User’s Manual
HS3854EIO60HE(B)
Cautions
1. Renesas neither warrants nor grants licenses of any rights of Renesas’s or any third party’s
patent, copyright, trademark, or other intellectual property rights for information contained in
this document. Renesas bears no responsibility for problems that may arise with third party’s
rights, including intellectual property rights, in connect ion with use of the information contained
in this document.
2. Products and product specifications may be subject to change without notice. Confirm that you
have received the latest product standards or specifications before final design, purchase or use.
3. Renesas makes every attempt to ensure that its products are of high quality and reliability.
However, contact Renesas’s sales office before using the product in an application t hat demands
especially high quality and reliability or where its failure or malfunction may directly threaten
human life or cause risk of bodily injury, such as aerospace, aeronautics, nuclear power,
combustion control, transportation, traffic, safety equipment or medical equipment for life
support.
4. Design your application so that the product is used within the ranges guaranteed by Renesas
particularly for maximum rating, operating supply voltage range, heat radiation characteristics,
installation conditions and other characteristics. Renesas bears no responsibility for failure or
damage when used beyond the guaranteed ranges. Even within the guaranteed ranges, consider
normally foreseeable failure rates or failure modes in semiconductor devices and employ
systemic measures such as fail-safes, so that the equipment incorporating Renesas product does
not cause bodily injury, fire or other consequential damage due to operation of the Renesas
product.
5. This product is not designed to be radiation resistant.
6. No one is permitted to reproduce or duplicate, in any form, the whole or part of this document
without written approval from Renesas.
7. Contact Renesas’s sales office for any questions regarding this document or Renesas
semiconductor products.
Preface
Thank you for purchasing this H8/3854 series expansion board (HS3854EIO60H; hereinafter
referred to as the expansion board) for the H8/300L series E6000 emulator.
The expansion board enables user systems for Renesas's original microcomputer H8/3854 series to
be developed using an H8/300L series E6000 emulator (HS3L08EPI60H; hereinafter referred to as
the emulator) and the H8/3834 evaluation chip set (HS3834EVI60H).
i
Contents
Section 1 Components......................................................................................1
Section 2 Connection Procedures......................................................................2
2.1 Using Emulator without Connecting User System...........................................................2
2.2 Using Emulator with Connecting User System through User System Interface Cable ....2
Section 3 Reset Switch......................................................................................4
Section 4 Notice ................................................................................................5
ii
Section 1 Components
Figure 1 shows the HS3854EIO60H expansion board appearance, and table 1 lists the components
of the expansion board. Please make sure you have all of these components when unpacking.
Figure 1 HS3854EIO60H Expansion Board
Table 1 HS3854EIO60H Components
No. Component Quantity Remarks
1 HS3854EIO60H 1 Expansion board
2 Documentation 1 User’s manual for HS3854EIO60H (this manual)
1
Section 2 Connection Procedures
WARNING
Always switch OFF the user system and the emulator
product before the EXPANSION BOARD or USER SYSTEM
INTERFACE CABLE is connected to or removed from any
part.
Before connecting, make sure that pin 1 on each side
is correctly aligned. Failure to do so will result in a FIRE
HAZARD and will damage the user system, the emulator
product, the user system interface cable, and the expansion
board, or will result in PERSONAL INJURY. The USER
PROGRAM will be LOST.
2.1 Using Emulator without Connecting User System
1. Make sure the emulator is turned off.
2. After making sure the direction of the expansion board connector labeled E6000 EMULATOR
is correct, firmly insert the expansion board connector into the em ulator station connector. When
the emulator is operated while connected to only the expansion board (without connecting the
user system), disconnect the cable body from the expansion board.
2.2 Using Emulator with Connecting User System through User System
Interface Cable
CAUTION
When connecting or removing the user system interface
cable, apply force only in the direction suitable for
connection or removal, while making sure not to bend or
twist the cable or connectors.
Otherwise, the cables or connectors will be damaged.
1. Make sure the emulator and the user system are turned off.
2
2. [1] After making sure the direction of the expansion board connector labeled E6000
EMULATOR is correct, firmly insert the expansion board connector into the emulator
station connector ([1] in figure 2).
[2] Connect the expansion board labeled USER INTERFACE CABLE and the user system
interface cable body.
Emulator station
0
0
0
6
E
[1]
E
C
A
ERF
T
[2]
Expansion board
BLE
A
C
E
Cable body connector
User system interface cable
Reset switch
T
OR
0
00
E
M
ULA
E6000
RI
USE
6
N
Figure 2 Connecting Expansion Board to Emulator Station and
User System Interface Cable
3
Section 3 Reset Switch
The reset switch is on the side of the expansion board as shown in figure 2. Pressing the reset switch
resets the H8/3854 dot-matrix LCD controller (table 2).
Table 2 Reset Types for the Emulator
Reset Type
HDI reset commands Reset CPU
user system during user
program execution
H8/3854 expansion
board reset switch
Emulator power on Emulator is turned on R R
R: Reset is valid, —: Reset is invalid
Condition
Go Reset
User reset is masked
by configuration setting
User reset is not
masked by
configuration setting
Reset switch is
pressed
H8/3854 Dot-Matrix
LCD Controller
— R
R — Reset input from the
R R
R —
H8/3854 CPU and I/O
other than LCD
Controller
4
Section 4 Notice
WARNING
1. This expansion board is specifically designed for the
HS3L08EPI60H emulator and the HS3834EVI60H
evaluation chip set. Do not use this expansion board
with any other emulator station.
2. Use the H8/3854 series user system interface cable
(HS3854ECH61H for FP-100B or HS3854ECN61H for TFP 100G). Do not use any other series of user system
interface cable.
1. Do not place heavy objects on the expansion board.
2. Power is supplied from the emulator station to the expansion board.
5
3. To open the case of the expansion board, remove the four screws on the top panel. To close the
case, place the top panel on the expansion board, and fix it with the four screws.
Screws
E
6000
E
M
U
L
A
TOR
Upper panel
TERF
N
I
E6000
USER
ABLE
EC
C
A
Figure 3 Removing Expansion Board Upper Panel
WARNING
When using a polarized capacitor, make sure that
the polarity is correct when installing the capacitor.
Failure to do so will result in a FIRE HAZARD and will
damage the user system, the emulator product, the user
system interface cable, and the expansion board, or will
result in PERSONAL INJURY.
4. To prevent breaking of wires in the expansion board, do not place heavy or sharp metal objects
on the expansion board while the case is open.
6
Loading...