S-9951
Use and Care Guide
IMPORTANT SAFETY
INSTRUCTIONS
When using electrical appliances, especially when children are present, basic
safety precautions should always be followed, including the following:
READ ALL INSTRUCTIONS BEFORE USING.
KEEP AWAY FROM WATER.
DANGER
As with most electrical appliances, electrical parts are electrically live even
when switch is off. To reduce the risk of death by electric shock:
■ Always unplug this appliance from the electrical outlet immediately after using.
■ Do not use while bathing or in the shower.
■ Do not place or store this appliance where it can fall or be pulled into a tub or sink.
■ Do not place or drop into water or other liquid.
■ Do not reach for an appliance that has fallen into water. Unplug it immediately.
■Unplug this appliance before cleaning it.
WARNING
To reduce the risk of burns, fire, electric shock or injury to persons:
■ An appliance should never be left unattended when it is plugged in.
■ Close supervision is necessary when this appliance is used by, on, or near
children or individuals with certain disabilities or special needs.
■ Use this appliance only for its intended use as described in this manual.
■ Never operate this appliance if it has a damaged cord or plug, if it is not
working properly, if it has been dropped or damaged, or if it has been dropped
into water.
■ Keep the cord away from the heated surfaces. Do not wrap the cord around
the appliance.
■ Never use while sleeping.
■ Never block the air openings of the appliance or place it on a soft surface,
such as a bed or couch, where the air openings may be blocked. Keep the air
openings free of lint, hair and the like.
■ Never drop or insert any object into any of the appliance’s openings.
■ Do not use outdoors or operate where aerosol (spray) products are being used,
or where oxygen is being administered.
■Do not use an extension cord.
■ This appliance is hot when in use. Do not let eyes or bare skin touch heated
surfaces.
■ Do not place the heated unit directly on any surface while it is hot or plugged in.
■ The plug on this appliance has one blade wider than the other, it is a polarized
plug. As a safety feature, this plug will fit in a polarized outlet only one way.
If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit
contact a qualified electrician. Do not attempt to defeat this safety feature.
■ Always store this appliance and cord in a moisture-free area. Do not store it in
temperatures exceeding 140°F (60°C).
■ This appliance is for household use only.
■ Do not plug or unplug this appliance when your hands are wet.
KEEP AWAY FROM ChILDREN
SAvE ThESE INSTRUCTIONS
Product Features
Thank you for purchasing the Remington® flat iron with frizz-resisting technology.
Please carefully read the instructions contained in this booklet, and keep them in
a safe place for future reference.
The Ultimate Styling Surface!
Delivers high ceramic heat and resists the effects of humidity. Frizz-resistant
ceramic plates are designed to:
■ Diminish frizz upon styling.
■Resist the effects of humidity to maintain smooth style.
2
1
3
8
7
Flat Iron Features
1. Frizz-resistant Ceramic plates
2. LCD display
3. Digital control
4
Plates Level Number of Bars Symbol
300°-340°F 1 Shortest bar
360°-390°F 2 Shortest bars
410°-430°F All three bars
4. ON/OFF button
5. Swivel cord
6. Hinge lock
6
7. Lock symbol
8. Temperature bars
5
Key Features:
Next Generation Floating Ceramic
Plates
Infused with a blend of frizzresistant micro conditioners– lasts
the lifetime of the product
Instant high heat - ready in 30
seconds
Digital precise heat - 300°-430°F
On/off switch and LCD indicator light
Automatic shutoff after 1 hour
Salon length, swivel cord
Worldwide dual voltage use
Audible feedback
Product benefits vs. traditional
straighteners:
Highest Grade Ceramic – smoothest
snag free glide
Frizz-resistant micro conditioners –
diminish frizz upon styling and resist
the effects of humidity for smooth style
all day
HOW TO USE
How it Works
As you use your straightener, a special blend of micro conditioners are evenly
emitted onto your hair. Micro conditioners in the coating come to the surface of
the plates during heating and operation of the straightener, and are transferred to
the hair during styling.
Heat Settings
Take extra care when using a professional styler. To prevent hair damage, make
sure to use the correct temperature setting for your hair type.
+/- Button Features
■Set to desired temperature setting.
■During heat up time, the LCD blue temperature display will pulse from, 0 to 3
bars until the desired temperature is reached.
■When the tool reaches the desired temperature, the pulsing will stop and the
correlating bars (1-3) will be displayed.
■Turbo Mode: (hold time about 2 seconds)
– Activating: Press “+” Button and hold about 2 seconds to increase temperature
to maximum 430°F setting.
– Decreasing: Press “-” Button to decrease the temperature like the normal
function mode.
■Lock Mode:
− Activating: Press and hold “+” button for about 3 seconds. All the keys will be
locked and the LCD will display the lock symbol.
– Releasing: Press and hold “-” button for about 3 seconds. All the keys will be
unlocked and the lock symbol will disappear.
Temp. Hair Type
A. 300˚-340˚F Very fine, fragile, damaged hair
B. 360˚-390˚F Normal, easy to straighten hair
C. 410˚-430˚F Thick, difficult to straighten hair
Automatic Safety Shutoff
After approximately one hour, the unit will automatically shut itself off. To
reactivate the unit, press the ON/OFF switch.
Hinge Lock
This professional flat iron has a closing lock to make the unit easier to store.
To lock the iron, simply squeeze the plates together and turn the switch to the
locked position. To unlock, turn the switch to the unlock position. NOTE: Do not
heat the unit in the locked position.
Usage Tips
Straightening Your Hair
1. Hair should be dry and free of tangles before using the styling iron.
2. Plug the styler into an electrical outlet. Press and hold the ON/OFF button until
the unit turns on and the LCD lights up.
3. Adjust the temperature using the temperature buttons. The display will flash
while the unit heats up, then glow steadily when it has reached the selected
temperature. The unit will beep when ready.
4. Divide hair into manageable sections and clip the upper layers on top of your
head and out of the way. Work with underneath layers first.
5. Test the styler on a small section of hair, then adjust the temperature up or down
before styling the rest of your hair.
NOTE:
■If you find that you need a higher setting while straightening your hair, simply
adjust the temperature to a higher heat setting.
■ While straightening your hair, if you find that you need a lower setting, adjust the
temperature to a lower heat setting. Because the unit is already hot, it may take
a few minutes to cool off.
6. Take a small section of hair, pull hair down and away from your scalp, and hold it
taut.
7. Starting at the roots, clamp hair firmly between the plates and run the styler
down the entire hair strand, from root to tip, in one smooth stroke. Do not hold it
in one area for a long period of time or damage to hair may occur.
8. To create curves or flicks, rotate your wrist to turn the iron in toward your head
or out away from your head as you run the iron down the hair strand.
9. Repeat with all the sections of your hair, working with the underneath layers first,
then the top and sides.
10. When you are finished styling, press and hold the ON/OFF button to turn the unit
off, unplug it, and allow it to cool before storing.
NOTE:
DUAL VOLTAGE APPLIANCE
■ Confirm the voltage available at each overseas location before using the
appliance. For connection to a 240-volt supply, use an attachment plug adapter
of the proper configuration for the power supply receptacle.
MAINTENANCE
Cleaning
Make sure the unit is unplugged and cool. Use a damp cloth to clean the plates
and the outside of the power handle. No other maintenance of the unit is required.
This appliance has no user serviceable parts.
Storage
Unplug the unit whenever it is not in use. Allow it to cool, then store it out of
reach of children in a safe, dry location.
Never wrap the cord around the appliance, since this will cause the cord to wear
prematurely and break, thus voiding warranty. Handle the cord carefully and
avoid jerking, twisting, or straining it, especially at plug connections. If the supply
cord is damaged, it must be replaced by the manufacturer, its service agent or
similarly qualified persons in order to avoid a hazard.
Warranty
Limited Four-Year Warranty
Spectrum Brands, Inc. warrants this product against any defects that are due to
faulty material or workmanship for a four-year period from the original date of
consumer purchase.
If the product should become defective within the warranty period, we will
replace it free of charge. Return your product and sales receipt with your name,
address and day time phone number to: Spectrum Brands, Inc., Attention:
Consumer Services, 601 Rayovac Drive, Madison, WI 53711. For more information
call 800-736-4648 or 800-268-0425 in Canada.
KEEP ORIGINAL SALES RECEIPT AS PROOF OF PURCHASE FOR WARRANTY
PURPOSES.
This warranty does not cover products damaged by the following:
■Accident, misuse, abuse or alteration of the product
■Servicing by unauthorized persons
■Use with unauthorized accessories
■Connecting it to incorrect current and voltage
■
Wrapping cord around appliance causing premature wear & breakage
■Any other conditions beyond our control
No responsibility, obligation, or liability is assumed for the installation or
maintenance of this product.
SPECTRUM BRANDS, INC. SHALL NOT BE RESPONSIBLE FOR ANY INCIDENTAL,
SPECIAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS
PRODUCT. ALL IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO IM PLIED
WARRANTIES OF FITNESS AND MERCHANTABILITY, ARE LIMITED IN DURATION
TO FOUR YEARS FROM DATE OF ORIGINAL PURCHASE.
This warranty gives you specific legal rights and you may also have other rights
which vary from state to state or province to province. Some states do not allow
the exclusion or limitation of incidental, special or consequential damages.
Spectrum Brands, Inc. Money-back Offer
If within 30 days after you have purchased your Remington® branded product,you
are not satisfied and would like a refund, return it with the sales slip indicating
purchase price and date of purchase to the retailer from whom it was purchased.
Spectrum Brands, Inc. will reimburse all retailers who accept the product within
30 days from the date of purchase. If you have any questions concerning the
money-back guarantee, please call 800-736-4648 or 800-268-0425 in Canada.
120/240 VAC 50/60 Hz
Questions or comments:
Call 800-736-4648 in U.S. or 800-268-0425 in Canada.
Or visit www.stylewithremington.com
® Registered Trademark of Spectrum Brands, Inc., or one of its subsidiaries.
©2009 SBI 06/09 Job# CS38335
Spectrum Brands, Inc. Madison, WI 53711
Spectrum Brands Canada, Inc. Mississauga, ON L5L 0A1
MADE IN CHINA
T22-28324