Remington S1001CRK User Manual

110446_REM_IFU_S1001CRK_21L+.indd 1 24.06.11 16:29

210C Ceramic Straightener

D

110446_REM_IFU_S1001CRK_21L+.indd 2 24.06.11 16:29

AHBGC

E

F

ENGLISH

Thank you for buying your new Remington® product.
Before use, please read these instructions carefully and keep them in a safe place for
future reference.

KEY FEATURES

A. High he at sett ing 210 °C
B. Ready to use in 30 seconds
C. Ceramic coated plates for even heat
D. On-off switch
E. Autom atic world wide voltage
F. Crac kle effect nail varnish
G. Emery Board
H. Swivel cord

2 year guarantee

INSTRUCTIONS FOR USE

Before use, make sure hair is clean, dry and tangle-free.

Plug in the unit, the on-indicator will glow and the styler will be ready to use, in

approximately 30 seconds.

For extra protection and best results, section hair prior to straightening and spray with heat

protection spray. Always straighten the lower layers first.
Run the straightener through the entire length of the hair, without stopping.
Repeat only twice per section to prevent hair damage.
When used at 120V the heat up times & temperatures may vary.

GBDNLFEIDKSFINPSKCZPL

GB

HUN

RUTRROGRSLAE

110446_REM_IFU_S1001CRK_21L+.indd GB_1 24.06.11 16:29

IMPORTANT INSTRUCTIONS

Due to the extre me heat c apabilities of this styler, ext ra care should be taken when using.
While heating, during use and cooling, place on a flat, smooth, heat-resistant surface. Only

hold unit at the end of the handle.
This is a high performance product, avoid frequent use to prevent damage to hair.
Please note regular use of styling products may deteriorate the coating.
Do not scratch the surf ace, as t his will deteriorate t he effectiveness of t he coating.

1

1

HR/

SRB