Remington OCN6 User Manual
OnCourse Navigator 6.0 (OCN) for PDA
Quick Start Guide
Thank you for choosing OCN as your in-car navigator. The SD card version of the
program is very easy to use. You only need to plug the card into your PDA. A simple setup
procedure will then run automatically. Later OCN will start when you insert the card into the PDA
and will exit (without losing any data) when you remove it.
Plug & GO – as simple as that
Contents of this manual:
- What’s in the box?
- What’s on the SD card?
- Automatic setup
- How to start the setup manually (optional)
- Ready to navigate
o The first steps if you have no GPS
o The first steps if you have GPS
Automatic GPS detection
Manual GPS configuration
- Out on the road
What’s in the box?
On unpacking OCN6 you will find a preprogrammed OCN SD Card, a CD including multilingual
manuals and this printed Quick Start Guide. That is all you need to use OCN.
Please insert this SD Card into your PDA.
NOTE: If you have purchased a miniSD / microSD card version, you will need to remove the
miniSD /microSD adapter before using the memory card.
Note: Never format this SD Card or delete any content. Formatting this SD Card
means losing your license key and the complete map material!
What’s on the SD Card?
The OCN6 SD Card contains everything you need to use the system. There is no need for
additional downloads from the Internet, product registration or other time consuming and/or
infrastructure demanding procedures. You can start using OCN wherever you are, right out of the
box, in just seconds.
The contents of the memory card:
- OCN6 application (no further registration needed)
- Autorun program to let you install OCN by simply inserting the card into the PDA
- Detailed map of your region with cities, post codes, streets, house numbers and
thousands of POIs (Points of Interest)
Automatic setup
To start using OCN is really simple. All you need to do is to plug the SD card into your PDA and
the setup procedure will start automatically*. It will perform all the necessary actions for you. You
need to do this only once for each PDA you intend to use OCN with, then OCN will start and quit
automatically as you insert or remove the card.
(* Some PDA models prevent the setup from running automatically. In this case follow the
instructions in ‘How to start the setup manually’.)
To complete the one time setup you need to do the following:
- If the environment permits, ensure that your PDA is not muted.
- If you already have a GPS device at hand, connect it to your PDA before starting
the setup.
- Insert the OCN SD card into your PDA.
-
-
-
When the PDA recognizes the card, OCN first asks you if the setup should
start or not. Tap Yes to set up and start using OCN now, or No to set it up
later.
The OCN environment is set up on your PDA within a few seconds.
Now choose the language of the program and the voice profile for the navigation
guidance. First select the written language of OCN then tap OK to confirm your selection.
Languages are listed in alphabetical order. Use the Previous/Next buttons if your
preferred language is not on the first page.
-
the written
will play a few words
with the selected profile. Highlight the line of your
-
Now select the voice profile for the guided navigation the same way you did for
language. There may be several different possibilities in your preferred language. To help
you choose the appropriate one, when tapping any of the lines, OCN
choice then tap OK to confirm your
selection.
The setup procedure is finished, OCN is ready to run, and starts automatically. Before
using OCN the first time, you need to read carefully and Accept the End User License
Agreement or Decline it if you do not agree with the conditions and limitations. In the
latter case you will exit OCN.
Loading...