MODELS TMPT AND TMPTR - THERMOCOUPLE OR RTD CONNECTOR WITH
BUILT IN 4-20 mA TEMPERATURE TRANSMITTER
HIGH ACCURACY, REPEATABILITY AND STABILITY
CONNECTOR DESIGN CONVERTS INPUT SIGNAL TO A
STANDARD 2-WIRE, 4-20 mA OUTPUT
PROVIDES “OPEN SENSOR WIRE” SIGNAL INDICATION
ENCAPSULATED HOUSING
COMPENSATES FOR LONG LEAD WIRES
FACTORY CALIBRATED, NO ADJUSTMENTS REQUIRED
MODELS FOR J, K, T (UNGROUNDED) THERMOCOUPLES AND
100 OHM, 0.00385 3-WIRE RTD'S
GENERAL DESCRIPTION
The model TMPT's internal circuitry conditions the non-linear millivolt
output of a thermocouple, across a specified temperature range, and retransmits
it as a standard 2-wire 4–20 mA analog output. The TMPTR also provides a
2-wire 4–20 mA output by conditioning the resistive change of a 100Ω, 0.00385
RTD sensor and transmitting it as a 4–20 mA output.
SPECIFICATIONS
TMPT SPECIFICATIONS
1. SUPPLY VOLTAGE: 9 to 24 VDC @ 30 mA
2. OUTPUT: 4 to 20 mA
3. TEMPERATURE RANGE: See Ordering Information
4. ACCURACY: ± 0.5% of full scale millivolt input @ 23º C plus the non-
linearity of the thermocouple type (note that the TMPT does not compensate
for thermocouple non-linearity)
5. TEMPERATURE COEFFICIENT: ± 0.002 mA/ºC
6. MAX LOOP LOAD: (Ω) = (V supply - 9 V)/0.02 A
7. TRANSMITTER OPERATING TEMPERATURE: -40º to 85ºC
8. AGENCY APPROVAL: CE
9. RESPONSE TIME: 120 msec (0 to 63% FS)
10. THERMOCOUPLE JUNCTION: Ungrounded
11. INPUT CONNECTION: Standard size female connector mates with both
* Max cable run is determined by max loop load and wire resistance ( ≈1000ft).
DIMENSIONS In inches (mm)
0.31
(7.9)
0.97
(24.6)
0.94 (23.8)
TRANSMITTER MODULE
ENCLOSED IN
S.S. HOUSING
3.13 (79.4)
1.06
(27.0)
THREE-PRONG
MINIATURE
RTD CONNECTOR
2-WIRE SHIELDED CABLE
1.19
(30.2)
0.75 (19.1)
10 FT
1.0
(25.4)
1
WIRING CONNECTION
EXTERNAL POWER
COMM
COMM.CURRENT
MAX
MIN
TOT
8.8.8.8.8
SP1SP2SP3SP4
DSP
PAR
+VDC
2FF1
RST
C
RED
BLACK
WHITE
TMPT
ORDERING INFORMATION
TEMPERATURE
MODEL NO.DESCRIPTION
TC
or
}
RTD
TMPT
TMPTR
TC TRANSMITTER
WITH FEMALE
CONNECTOR
RTD TRANSMITTER
WITH FEMALE
CONNECTOR
TC
ANSI TYPE
K
K
T
T
J
J
-
RANGE
-18 to 1093 °C
(0 to 2000 °F)
-18 to 538 °C
(0 to 1000 °F)
-18 to 121 °C
(0 to 250 °F)
-18 to 399 °C
(0 to 750 °F)
-18 to 121 °C
(0 to 250 °F)
-18 to 538 °C
(0 to 1000 °F)
2 to 569 °C
(36 to 1056 °F)
PART NUMBER
TMPTRN01
TMPTRN02
TMPTRN03
TMPTRN04
TMPTRN05
TMPTRN06
TMPTRN07
PROCESS METER
Covered by US and Foreign Patents.
Accessories
MODEL TMPCN - QUICK DISCONNECT STANDARD CONNECTORS
GENERAL DESCRIPTION
Standard Connectors are for use with the Standard Quick Disconnect TC
Probes. They are available in both male and female termination, and include a
“write on label” for easy identification. The female standard connector is a
universal connector, meaning it can be used to terminate male versions of both
the standard and miniature connector.
DIMENSIONS In inches (mm)
0.10 DIA.
(2.5)
1.31
(33.3)
0.47
(11.9)
SPECIFICATIONS
1. CONNECTOR BODY MATERIAL: Glass Filled Nylon, for temperature
ranges of -29 to 220º C. (-20 to 428 °F)
2. CONNECTOR BODY COLOR: ANSI color coded
3. WIRE GAGE: Accepts stranded or solid wire up to 14 AWG
MODEL TMPCN - QUICK DISCONNECT MINIATURE CONNECTORS
GENERAL DESCRIPTION
Miniature Connectors are for use with the Miniature Quick Disconnect TC
Probes. They are available in both male and female termination, and include a
“write on label” for easy identification.
DIMENSIONS In inches (mm)
0.10
(2.5) DIA.
0.19
(4.8)
(7.9)
0.09
(2.3)
0.13
(3.3)
0.31
0.66
(16.8)
MALE
0.81
(20.6)
0.50
(12.7)
0.03 (0.8)
0.13 (3.3)
0.31 (7.9)
0.194 (4.9) WIRE HOLE
0.28
(7.1)
1.00
(25.4)
FEMALE
SPECIFICATIONS
1. CONNECTOR BODY MATERIAL: Glass Filled Nylon, for temperature
ranges of -29 to 220º C. (-20 to 428 °F)
2. CONNECTOR BODY COLOR: ANSI color coded
3. WIRE GAGE: Accepts stranded or solid wire up to 20 AWG
Red Lion Controls
Headquarters
20 Willow Springs Circle
York PA 17406
Tel +1 (717) 767-6511
Fax +1 (717) 764-0839
LIMITED WARRANTY
The Company warrants the products it manufactures against defects in materials and workmanship for a
period limited to two years from the date of shipment, provided the products have been stored, handled,
installed, and used under proper conditions. The Company’s liability under this limited warranty shall
extend only to the repair or replacement of a defective product, at The Company’s option. The Company
disclaims all liability for any afrmation, promise or representation with respect to the products.
The customer agrees to hold Red Lion Controls harmless from, defend, and indemnify RLC against
damages, claims, and expenses arising out of subsequent sales of RLC products or products containing
components manufactured by RLC and based upon personal injuries, deaths, property damage, lost prots,
and other matters which Buyer, its employees, or sub-contractors are or may be to any extent liable,
including without limitation penalties imposed by the Consumer Product Safety Act (P.L. 92-573) and
liability imposed upon any person pursuant to the Magnuson-Moss Warranty Act (P.L. 93-637), as now in
effect or as amended hereafter.
No warranties expressed or implied are created with respect to The Company’s products except those
expressly contained herein. The Customer acknowledges the disclaimers and limitations contained herein
and relies on no other warranties or afrmations.
Red Lion Controls
Europe
Softwareweg 9
NL - 3821 BN Amersfoort
Tel +31 (0) 334 723 225
Fax +31 (0) 334 893 793
Red Lion Controls
India
201-B, 2nd Floor, Park Centra
Opp 32 Mile Stone, Sector-30
Gurgaon-122002 Haryana, India
Tel +91 984 487 0503
Red Lion Controls
China
Unit 302, XinAn Plaza
Building 13, No.99 Tianzhou Road
ShangHai, P.R. China 200223
Tel +86 21 6113 3688
Fax +86 21 6113 3683
4
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.