MODEL PSAH - HALL EFFECT SPEED SENSOR
DETECTS STEEL SENSING GEARS OR OTHER FERROUS
TARGETS
NPN OPEN COLLECTOR OUTPUT
OPERATES FROM 0 TO 10 KHz
IDEAL FOR RATE APPLICATIONS
Bulletin No. PSAH-B
Drawing No. LP0675
Released 03/13
DESCRIPTION
The Hall Effect speed sensor (PSAH) is ideal for sensing steel gears or other
ferrous targets from 0 to 10 KHz. This sensor does not have a minimum
threshold speed as does a magnetic pickup sensor. However, when the sensor is
first powered up, the output state is indeterminate (Hi or Lo) when the sensor is
not detecting metal. The unit operates from a +8 to +30 VDC power supply and
is reverse polarity protected. The sensor face can be mounted flush into metal
panels. The case is stainless steel and is supplied with 10 feet (3 M) of cable.
The stranded shield wire is not connected to the sensor circuit or case.
SPECIFICATIONS
1. POWER SUPPLY: +8 to +30 VDC @ 30 mA max.; reverse polarity
protected.
2. MAXIMUM SENSING DISTANCE: 0.040" (1 mm).
3. OUTPUT: NPN O.C. transistor; V
mA max. load.
4. OPERATING FREQUENCY: 0 to 10 KHz.
5. OPERATING TEMPERATURE RANGE: -25°C to 70°C
(-14 °F to 158 °F).
6. OUTPUT CABLE:
Integrally potted 10 ft PVC jacketed, 3 wire, 22 AWG
conductors, with stranded shield wire and 100% foil coverage; grey PVC
jacket.
Color Code: Red (+VDC), Black (Comm.), White (NPN OC Output).
7. CONSTRUCTION: Epoxy encapsulated 0.297 sensor in 0.75" ±0.005" dia.
#304 stainless steel case.
DIMENSIONS In inches (mm)
PSAH
FLUSH MOUNT
0.25 DIA.
POLE PIECE
304 S.S. CASE
0.750±.005 DIA.
NEOPRENE STRAIN
RELIEF BOOT
3.5 (88.9)
4.5 (114.3)
= 30 VDC; V
MAX
= 1 V
SAT
WIRE COLOR CODE
RED = +VDC
BLACK = COMMON
WHITE = NPN O.C. OUTPUT
0.9 (22.9) DIA.
10 FT. 3-WIRE CABLE
INTEGRALLY POTTED
MAX
@ 30
TYPICAL COUNTER
PSAH
COMMON
+VDC
O.C. OUTPUT
SHIELD WIRE
N/C
(RED)
(WHITE)
(BLACK)
DIP SWITCH SET-UP
+12VDC
COUNT
COMMON
* APPLICATION
DEPENDENT
MAG.
SRC.
*
SNK.
LOGIC
LO FRQ.
HI
TARGET SIZE
The PSAH can detect gears as small as 24 D.P. or other ferrous targets with
equal or greater dimensions. The sensor is compatible with all Red Lion
Controls Sensing Gears.
3/4" DIAMETER CYLINDRICAL SENSOR MOUNTING
The PSAH and other Red Lion Controls 3/4" dia. cylindrical pickups may be
easily mounted using Model 5400100 Block Mount (see diagram below). This
machined block of solid
aluminum provides for
rigid mounting using the
two included #8-32 x 1/2"
screws. The single screw
split-clamp design allows
for easy adjustment of the
airgap and locks the unit
securely without
.25
(6.4)
deforming the case.
For 3/4" cylindrical sensors
Qty. 2 #8-32 x 1/2
P/N 5400100
Block Mount
SENSOR
.187
(4.8)
.50
(12.7)
1.00
(25.4)
" Mounting screws included
.875
(22.2)
.625
(15.9)
1.625
(41.3)
#8-32 THD.
.25" (6.4) MIN.
ORDERING INFORMATION
MODEL NO. DESCRIPTION PART NUMBER
PSAH NPN O.C. Hall Effect Sensor PSAH0000
BM Block Mount 5400100
Do not dispose of unit in trash - Recycle