Red Lion PMK8 User Manual

PMK8 DIMENSIONS In inches (mm)
The PMK8 panel mount adapter kit is used to mount a PAX meter into an
existing GEMINI panel cut-out. The kit includes two durable steel mounting plates painted black and a neoprene gasket. The Adapter Kit, when used with a meter which has NEMA 4/IP65 specifications, will meet NEMA 4/IP65 requirements when properly installed.
MODEL PMK8 - PANEL MOUNT ADAPTER KIT FOR PAX TO GEMINI CUT-OUT
ORDERING INFORMATION
Tel +1 (717) 767-6511 Fax +1 (717) 764-0839 www.redlion-controls.com
MODEL NO. DESCRIPTION PART NUMBER
PMK8 Panel Mount Adapter Kit (PAX to Gemini) PMK80000
MOUNTING PLATE ADAPTER PLATE
PMK8 INSTALLATION
1. Apply the panel gasket (provided with the meter) over the PAX meter .
2. Insert the PAX meter through the mounting plate.
3. Apply the panel gasket (provided with the adapter kit) over the PAX meter behind the mounting plate.
4. Insert the PAX meter with mounting plate and gaskets into the front of the existing Gemini hole cut-out. Slide the adapter plate over the rear of the PAX meter.
5. Slide the panel latch (provided with the meter) over the
rear of the PAX meter and tighten the screws.
Loading...