RCA WHR120RS User Manual

Thank you for choosing RCA Wireless Headphones. You have selected
a fine product designed to provide years of performance. Before
attempting to use your Wireless Headphones, please remove all parts
from the box and read the installation and use instructions carefully.

STEREO INFRARED
HEADPHONE

Limited 1 Year Warranty WHR120RS

wireless

HEADPHONES

WITH FLAT TRANSMITTER

2

2

This infrared (IR) wireless headphone system transmits stereo sound
signals throughout the room allowing you to enjoy music or sound
privately from any audio or video device. With a range of up to 25
feet, you may have freedom from wires while listening to your TV,
video or audio CD in the same room. Just connect the transmitter to
any stereo receiver, TV, DBS, DVD, or CD device and enjoy clear
stereo sound from across the room!

HEADSET SAFETY

•Do not play your headset at high volume.

Hearing experts advise against continuous extended play.

•If you experience a ringing in your ears, reduce the volume or
discontinue use.

•Make sure the volume level of the headphone is set at a
comfortable listening level before placing it in position over

IR stereo transmitter
IR stereo headphone
AC/DC adapter

6.3 mm stereo adapter

Rechargeable batteries
Instructions for use

THE FOLLOWING COMPONENTS ARE INCLUDED:

• Transmits the stereo audio signal from your audio or video
source to your IR headphone without wires

• Uses high-frequency IR signals to carry audio signal,
ensuring clear, sharp reception

• Rechargeable batteries for powering the headphones

FEATURES

INTRODUCTION

3

ON THE IR STEREO TRANSMITTER (see figure 1 below)

1. IR transmitting LEDs,to transmit the audio signal to the IR

headphone

2. Power on/off switch

3. DC input connector, to power the IR transmitter

4. Recharge cable, to charge the batteries of IR headphone

5. Input stereo audio signal cable with 3.5 mm jack connector

3

Figure 1

ON THE STEREO HEADPHONE RECEIVER (see figure 2 below)

6. Power on/off LED indicator

7. Volume control

8. Power on/off switch

9. IR sensors, to receive IR signals from the transmittes

10. Recharge cable input socket to recharge the batteries of
the IR headphone

11. Charge LED indicator

Figure 2

10

8

7

9

6

(FRONT)

(BACK)

3

2

4

5

11

EXPLANATION OF CONTROLS

1

RIGHT

LEFT