RCA RLC2626 User Manual
RLC2626
In case of smoke, strange noise or strange smell
Disconnect the power plug from the power outlet;
attempt to make repairs yourself because this
High Voltage
Refer all servicing to qualified service personnel.
Important Safety Instructions and Maintenance
To reduce the risk of fire or electric shock, do not
1
Important Safety Instructions
CAUTION
Risk of electronic shock, do not open.
Do not attempt to service this product yourself
as opening or removing covers may expose
you to dangerous voltage or other hazards.
expose this product to rain or moisture.
The apparatus shall not be exposed to dripping
or splashing and no objects filled with liquids,
such as vases, shall be placed on the apparatus.
from the unit:
Turn off the power switch immediately;
Contact your dealer or service centre. Never
could be dangerous.
Never push objects of any kind into the set
through the cabinet slots as they may touch
dangerous voltage points or short-circuit parts that
could result in a fire or electric shock. Never spill
liquid of any kind on the set. Use special caution
in households where children are present. The
apparatus is not suitable for children under 3-year
to operate.
This product is equipped with a polarized plug (aplug
having one blade wider than the other).
This plug will fit into the power outlet only one way,
this is a Safety feature. If you are unable to insert the
plug fully into the outlet, try to reverse the plug and if
the plug should still fail to fit, contact your electrical
technician to replace your obsolete outlet.
Do not defect the safety purpose of the polarized plug.
Power supply cords should be routed safety to
prevent life and property from dangerous with
damaged cord.
Mains plug is used as the disconnect device. It
shall remain readily operable and should not be
obstructed during intended use. To be completely
disconnected the apparatus from supply mains, the
mains plug of the apparatus shall be disconnected.
Do not open
Important Safety Instructions and Maintenance
An outside antenna system should not be located in
the vicinity of overhead power lines or other electric
light or power circuits, or where it can fall into such
antenna system, extreme care should be taken to keep
other products (including amplifiers) that produce heat.
is not exposed to direct sunlight. It is best to have soft
2
Excessive sound pressure from earphones and
To avoid the fire, no naked flame source,
Important Safety Instructions
such as lighted candles, should be
placed on the apparatus.
power lines or circuits. When installing an outside
from touching such power lines or circuits as contact
with them might be fatal.
Always turn the set off when it is not being used.
Unplug the apparatus from the AC outlet when it will
not be used for a long period of time. And when there
is a lightning, unplug the unit from the AC outlet
immediately. Never touch the antenna wire during
lightning.
Do not pull the plug out by the wire;
Never touch the plug with wet hands.
headphones can cause hearing loss.
Installation
The ventilation should not be impeded by covering the
ventilation opening with items, such as newspapers,
tablecloths, curtains, etc.
At least 10 cm space should be left around the
apparatus for sufficient ventilation.
The product should be situated away from heat
sources such as radiators,heat registers, stoves, or
Place the apparatus in such a position that the screen
indirect lighting while watching and avoid complete
dark environment and reflection from the screen as
these may cause eye fatigue.
Keep the product away from high magnetic field (i.e.
power-amplified power speaker) to avoid affecting the
tint;
3
Important Safety Instructions and Maintenance
Cleaning
When the TV being moved in from cold place, it needs
some right time for dew inside unit evaporating fully
Unplug this apparatus from the AC outlet before
cleaning. Do not use liquid cleaners or aerosol
Do not place the set on an unstable cart, stand, table
injury as well as damage to the product. Use only with
the cart, stand, tripod, bracket, or table specified by
To prevent injury, this apparatus must be securely
Move
For your protection, please read this instruction completely, and keep this manual for
Installation
or shelf. The set may fall, causing serious personal
the manufacturer, or sold with the apparatus. An
appliance and cart combination should be moved with
care. Quick stops, excessive force, and uneven
surfaces may cause the appliance and cart
combination to overturn.
Do not place this apparatus near water, for example,
near a bath tub, wash bowl, kitchen sink, or laundry
tub;in a wet basement;or a swimming pool;and
the like;
before turn on the unit;
attached to the floor/wall in accordance with the
installation instructions.
cleaners. Use a damp cloth for cleaning;
future reference.
Contents
General description5
Specifications and accessories6
Overview7
Basic operation10
External connection12
Basic operation14
Trouble shooting23
Picture defects and countermeasures24
Basic operation
4
General description
Feature:
l Zero X radiation complies to green environment protection requirement
l Auto tuning and fine tuning
l One composite video input socket (back)
l One side composite video input socket
l One S-Video input socket
l One PC VGA input socket
l One YPbPr input socket
l One HDMI input socket (HDMI 1.3)
l One AV output socket
l Headphone
l Multi-language OSD
l Programmable TV sleep timer
l No-signal automatic power off function
l PC VGA mode: VGA, SVGA, XGA
l YPbPr mode:480i, 480P, 576P, 720P, 1080i, 1080P
l HDMI mode:480P, 576P, 720P, 1080i, 1080P
Note:
1. In case of any design change,a notice will not be released.
2. The composite video output function only support TV and AV input.
Specification
5
Specifications and accessories
TV without stand
TV without stand
1366X768
~120V 60Hz
645X108X434mm
645X235X493mm
Specifications:
Description
Dimensions
(LXWXH)
TV with stand
TV with stand
6.4 Kg
RLC2626
4WX2
74W
7.2 Kg
Accessories:
l User’s manual l Remote control
l Wall-mounted accessories: Two wall-mounted brackets, four fixed screws
Note:
1.Due to TV may be used with different display screen, weight marked in this
user's manual or in packaging box are subject to change without notice.
2.The illustrations and on-screen displays in this user’s manual are for
explanation purposes and may vary slightly from actual operations.In case of
any design change, a notice will not be released.
6
and four fixed sleeves.(Optional)
Overview
1. Power indicator
Green: Normal playing status.
Point remote control at this sensor to
Press these two buttons to increase or
Press these two buttons to select channel
Press this button to display the selectable
AV2 IN
IR remote sensor
10
、
AUDIO(R&L)
2
、
1
、
Power indicator
7
、
4
、
3
、
6
Red: Standby status.
2. IR remote sensor
conduct remote control.
3. VOL /
decrease the volume or operate menu.
4. PROG /
5
、
or operate menu.
5. MENU
Press this button to display OSD menu.
6.
Press this button to enter standby mode
under normal play, and press this button
、
to enter normal play mode under standby
mode.
7. INPUT
8
、
VIDEO 2
Headphone
signal source for main source.
7
Loading...