RCA RLC2226 User Manual

RLC2226

In case of smoke, strange noise or strange smell

Disconnect the power plug from the power outlet;

attempt to make repairs yourself because this

High Voltage

Refer all servicing to qualified service personnel.

Important Safety Instructions and Maintenance

To reduce the risk of fire or electric shock, do not

Important Safety Instructions

CAUTION

Risk of electronic shock, do not open. Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards.

expose this product to rain or moisture. The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.

from the unit:

Turn off the power switch immediately;

Contact your dealer or service centre. Never

could be dangerous. Never push objects of any kind into the set

through the cabinet slots as they may touch dangerous voltage points or short-circuit parts that could result in a fire or electric shock. Never spill liquid of any kind on the set. Use special caution in households where children are present. The apparatus is not suitable for children under 3-year to operate.

This product is equipped with a polarized plug (aplug having one blade wider than the other). This plug will fit into the power outlet only one way, this is a Safety feature. If you are unable to insert the plug fully into the outlet, try to reverse the plug and if the plug should still fail to fit, contact your electrical technician to replace your obsolete outlet. Do not defect the safety purpose of the polarized plug. Power supply cords should be routed safety to prevent life and property from dangerous with damaged cord. Mains plug is used as the disconnect device. It shall remain readily operable and should not be obstructed during intended use. To be completely disconnected the apparatus from supply mains, the mains plug of the apparatus shall be disconnected.

Do not open

Important Safety Instructions and Maintenance

An outside antenna system should not be located in

the vicinity of overhead power lines or other electric

light or power circuits, or where it can fall into such

antenna system, extreme care should be taken to keep

other products (including amplifiers) that produce heat.

is not exposed to direct sunlight. It is best to have soft

Excessive sound pressure from earphones and

To avoid the fire, no naked flame source,

Important Safety Instructions

such as lighted candles, should be placed on the apparatus.

power lines or circuits. When installing an outside

from touching such power lines or circuits as contact

with them might be fatal. Always turn the set off when it is not being used. Unplug the apparatus from the AC outlet when it will not be used for a long period of time. And when there is a lightning, unplug the unit from the AC outlet immediately. Never touch the antenna wire during lightning.

Do not pull the plug out by the wire;

Never touch the plug with wet hands.

headphones can cause hearing loss.

Installation

The ventilation should not be impeded by covering the ventilation opening with items, such as newspapers, tablecloths, curtains, etc. At least 10 cm space should be left around the apparatus for sufficient ventilation.

The product should be situated away from heat sources such as radiators,heat registers, stoves, or

Place the apparatus in such a position that the screen

indirect lighting while watching and avoid complete dark environment and reflection from the screen as these may cause eye fatigue. Keep the product away from high magnetic field (i.e. power-amplified power speaker) to avoid affecting the tint;

Important Safety Instructions and Maintenance

Cleaning

When the TV being moved in from cold place, it needs

some right time for dew inside unit evaporating fully

Unplug this apparatus from the AC outlet before

cleaning. Do not use liquid cleaners or aerosol

Do not place the set on an unstable cart, stand, table

injury as well as damage to the product. Use only with

the cart, stand, tripod, bracket, or table specified by

To prevent injury, this apparatus must be securely

Move

For your protection, please read this instruction completely, and keep this manual for

Installation

or shelf. The set may fall, causing serious personal

the manufacturer, or sold with the apparatus. An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn.

Do not place this apparatus near water, for example, near a bath tub, wash bowl, kitchen sink, or laundry tub;in a wet basement;or a swimming pool;and the like;

before turn on the unit;

attached to the floor/wall in accordance with the installation instructions.

cleaners. Use a damp cloth for cleaning;

future reference.

Contents

General description 5 Specifications and accessories 6 Overview 7 Basic operation 10 External connection 12 Basic operation 14 Trouble shooting 23 Picture defects and countermeasures 24

Basic operation

General description

Feature:

l Zero X radiation complies to green environment protection requirement l Auto tuning and fine tuning l One composite video input sockets (back) l One S-Video input socket l One PC VGA input socket l One YPbPr input socket l One HDMI input socket (HDMI 1.3) l One AV output socket l Headphone l Multi-language OSD l Programmable TV sleep timer l No-signal automatic power off function l PC VGA mode: VGA, SVGA, XGA l YPbPr mode:480i, 480P, 576P, 720P, 1080i, 1080P l HDMI mode:480P, 576P, 720P, 1080i, 1080P

Note:

1. In case of any design change,a notice will not be released.

2. The composite video output function only support TV and AV input.

Specification

Specifications and accessories

1366X768

TV without stand

22 Diagonal (max.)

Specifications:

Description RLC2226

AC ~120V 60Hz

2WX2

50W

Dimensions (LXWXH)

Accessories:

l User’s manual l Remote control l Wall-mounted accessories: Two wall-mounted brackets, four fixed screws

and four fixed sleeves.(Optional)

Note:

1.Due to TV may be used with different display screen, weight marked in this user's manual or in packaging box are subject to change without notice.

2.The illustrations and on-screen displays in this user’s manual are for explanation purposes and may vary slightly from actual operations.In case of any design change, a notice will not be released.

TV with stand

530209393XXmm 53077XXmm359

5.0 Kg

4.6 Kg

Overview

1. Power indicator

Green: Normal playing status.

Point remote control at this sensor to

Press this button to display OSD menu.

Press this button to display the selectable

5. PROG /

Press these two buttons to select channel

6. VOL /

1. Power indicator

2. IR remote sensor

Red: Standby status.

2. IR remote sensor

conduct remote control.

3. INPUT

signal source for main source.

4. MENU

or operate menu.

Press these two buttons to increase or decrease the volume or operate menu.

7. Press this button to enter standby mode under normal play, and press this button to enter normal play mode under standby mode.

+ 18 hidden pages