Raytac VH2400H Users Manual

Operation guide on Raytac 2.4GHz Wireless VoIP Phone
r
g
1. Operation guide of Handset
Date: Mar.2, 2006
Volume up
Volume down
Connection hole for Rechar
eable cable
Press to loop among Incoming calls, Outgoing calls, Missed calls
Press to loop between On-line contacts only and All contacts
To dial and
answe
Dial Pad for SkypeOut.
PS:
1. Skype Contacts will
2. Press and hold “0+” key
automatically pop out when pressing any key.
about one second to have “+” mark.
1. When Skype Contacts is not on PC screen, press to pop out Skype Contacts.
2. When Skype Contacts is on PC screen, press to scroll up or down selected items.
1. When Skype Contacts is not on PC screen, press to pop out Skype Contacts.
2. When Skype Contacts is on PC screen, press:
- to loop among Contacts, Dial Pad and History on PC screen
- to clear History or Contacts check on the LCD of this phone
- to backspace when using this phone to make SkypeOut call
3. When Skype contacts is on PC screen, press and hold for one second to pop off Skype Contacts from PC screen.
1. Press and hold about 4 seconds to On or Off this phone.
2. When the phone is On, press:
- to hang up call
- to clear History or Contacts check on the LCD of this phone
2. Icon meaning on LCD display
Top line on LCD display
- Phone connected to PC; - Phone disconnect to PC
- Contacts, - Online, - All (include Online and Offline)
- Hang up; - During dialing; - During speaking
- Volume indi cation
- Boost speaker volume (by pressing volume up key for 1 second); - Speaker mute (by pressing
volume down key for 1 second)
- Phone user’s status: Online, - Offline; - Skype Me, - Away; - Not Available; ­Do not disturb,
PS: Pressing scroll down key for one second to display and change phone user’s status.
- Battery power indication
Second line on LCD display
- Contact is Online; - Contact is Offline
PS: Function or key icon might be changed without prior notice.
- Invisible
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
IMPORTANT NOTE: FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 2.5cm between the radiator & your body.
Loading...