Page 1
DATA SHEET
Description
Rane takes performance mixer design as
seriously as performing DJs take their art
form. e TTM 56S is flexible, durable, and
feature packed. e audio quality of the TTM
56S qualifies it for use in the most demanding
live venue, recording studio or live broadcast
applications.
TTM 56S
PERFORMANCE MIXER
Non-Contact Magnetic Crossfader and Channel
Faders
Rane’s patented magnetic fader is the fastest, most accurate,
and longest lasting on the planet. e design uses non-contact
magnetic position sensor technology previously reserved for the
most demanding aerospace and industrial applications. No travel
noise - No bleed - Ever! Unlike optical non-contact faders, the
magnetic fader is impervious to smoke, moisture, temperature
and aging. e electrical performance is totally unaffected by
use. e mechanical life of the magnetic fader exceeds 10 million
operations.
ese magnetic faders know exactly what your hand is doing!
A proprietary curve-translation module converts your hand motion into precise audio level control. Each of the Crossfader and
Channel Fader controls include a Reverse switch and an indepen-
dent continuously adjustable Contour control, adjusting from a
smooth blend to extremely fast cut.
Post-Fader FlexFx™
Rane’s proprietary FlexFx effects loop switches route Program
1 and/or Program 2 to the effects loop. A Wet/Dry pan control
gives the user total control of how much processed signal is in the
mix. e effects loop is post-fader, so reverb and other delay effects
respond to both Channel Faders and Crossfader without cutting
off tails.
Stereo Metering
e TTM 56S features two 10-segment meters with peak-hold.
A source switch allows users to select dual-mono Cue or Stereo
Master operation. No stress about dropping a channel without
knowing.
Auxiliary Input and Output (Session Mix)
A stereo Aux Input with a Level control provides input for a
session mix, drum machine or other auxiliary input signal. e
stereo Aux Output with Level control provides output for session
mix, booth monitoring, recording or second zone.
3-Band Accelerated-Slope™ Full-Cut EQ
e TTM 56S provides 3-band, full cut tone controls for
Program 1 and Program 2. EQ engage switches allow A/B
comparison and the ability to quickly cut or add EQ effect.
TTM 56 to TTM 56S
e TTM 56 has been the world's most popular battle DJ mixer
for many years. e new TTM 56S improves with a universal
internal power supply that works almost anywhere in the world
(100-240 VAC). All four inputs are now Phono/Line switchable,
now letting you plug in 4 turntables or 4 CD players, or any
combination. Both ¼" and 3.5 mm headphone jacks are now
provided. e Transform switches are now Kill switches, and the
occasionally confusing and rarely-used Mode switches have been
removed. Operation is simplified by putting all the controls you
need on top, and increasing the width by one inch.
Data Sheet-1
Page 2
TTM 56S
PERFORMANCE MIXER
Parameter Specication Conditions & Comments
Program Inputs: Phono: Switchable Line / Phono Unbalanced RCA jacks
..........Response RIAA ±1 dB
..........Gain 40 dB 1 kHz
..........Input Impedance 47.5 kΩ, 200 pF
.....Line: Switchable Line / Phono Unbalanced RCA jacks
..........Gain Off to +12 dB 1 kHz
..........Input Impedance 20 kΩ 1 kHz
.....Tone Control (EQ) 3-Band, Accelerated-Slope™ Full Cut, see figures on next page
Auxiliary Input: 1 stereo Unbalanced RCA jacks
..........Input Impedance 20 kΩ 1 kHz
..........Gain Off to +10 dB 1 kHz
FlexFX Return: Stereo Unbalanced ¼" TS (tip-sleeve) phone jack
..........Input Impedance 12 kΩ Minimum
..........Gain Unity 1 kHz
Mic Input: Active Balanced Balanced ¼" TRS (tip-ring-sleeve) phone jack
..........Input Impedance 20 kΩ 10 kΩ, each leg to ground
..........Gain 44 dB 1 kHz, Master Out, max gain
..........Frequency Response 30 to 20 kHz +0, -3 dB, max gain
..........CMMR >40 dB 1 kHz, max gain
..........S/N 76 dB Re +4 dBu, max gain, @ insert, 20 kHz BW
..........Tone Control 2-Band See Figure in Manual
..........Effects Insert Loop ¼" TRS, Tip=Send, Ring=Return Unbalanced mono
Master Output: Stereo balanced / unbalanced ¼" TRS phone / RCA jacks
..........Output Impedance 300 Ω balanced each leg 301Ω unbalanced
..........Gain 6 dB balanced 0 dB unbalanced
..........Frequency Response 10 Hz to 30 kHz +0, -3 dB
..........THD+N <0.05% re +4 dBu, 20 to 20 kHz, 20 kHz BW
..........S/N (balanced output) 101 dB re +4 dBu, 20 kHz BW, unity gain
94 dB re +4 dBu, 20 kHz BW, 12 dB gain
Auxiliary Output: Stereo Unbalanced RCA jacks
..........Output Impedance 301 Ω
..........Gain Off to +6 dB
FlexFX Send: Stereo Unbalanced ¼" TS phone jack
..........Output Impedance 301 Ω Unity Gain
General Specifications:
..........Control Feed-through -80 dB re +4 dBu, all controls
..........Crosstalk -70 dB re +4 dBu, 1 kHz
Unit: Agency Listing UL/cUL/CE
..........Universal Line Voltage 100-240 VAC 50-60 Hz
..........Maximum Power 20 W
Unit: Front Panel Size 13.3"H x 10"W (33.8 cm x 25.4 cm)
..........Coffin Depth 3" (see detail) (7.7 cm)
..........Weight 9 lb (3.7 kg)
Shipping: Size 7.75"H x 12.75"W x 19.25"D (19.7 x 32.5 x 49 cm)
..........Weight 12 lb (5.5 kg)
Note: All specifications are typical unless otherwise stated.
Data Sheet-2
Page 3
TTM 56S
AUDIO PRECISION vs
-40
-35
-30
-25
-20
-15
-10
-5
0
5
10
AMPL(dBr)
20 100 1k 10k 50k
FREQ(Hz)
Summed Response
High MidLow
Low Off,
Mid 0,
High Off
Low 0,
Mid Off,
High Off
Low 0, Mid 0, High 0
Low Off,
Mid Off,
High 0
AUDIO PRECISION vs
-40
-35
-30
-25
-20
-15
-10
-5
0
5
10
AMPL(dBr)
20 100 1k 10k 50k
FREQ(Hz)
Low Off,
Mid 0,
High Off
Low 0, Mid +6, High 0
Low 0,
Mid Off,
High 0
Low +6, Mid 0, High +6
PERFORMANCE MIXER
EQ Control Response
Figure 1 shows the three EQ bands and the at summed response Figure 2 shows the interactive operation of the three EQ controls
Features
Patented non-contact magnetic program faders and crossfader.
Continuously adjustable Contour adjustments for all faders.
Program 1 and Program 2 Input Buses with:
2 Phono / Line switchable inputs with Kill switch.
Input Gain control.
3-band Accelerated-Slope™, full cut (+6 dB to off) EQ.
FlexFX™ effects loop assignment with Wet / Dry control.
Auxiliary (session mix) Input / Output with Level controls.
Balanced Mic input withLevel control with:
2-band EQ and independent Effects Loop.
Independent Balanced and unbalanced Master Outputs.
Two 10-segment meters feature peak-hold with:
Source switch for dual-mono Cue or stereo Master.
Headphone monitoring with:
Master / Cue select switch with Cue Pan control.
Powerful headphone amplifier with Level control.
Top panel is luminescent under black light.
Example System
Data Sheet-3
Page 4
TTM 56S
AUX
PHONO
GROUNDS
POWER
PGM 1PGM 2
4321
4
4332211
4321
100-240V
50/60 Hz
20 WATTS
ACN 001 345 482
MADE IN U.S.A.
RANE CORP.
U.S. PATENT 6,813,361
OUT IN
OUT IN
MIC
BALANCED
MASTER
OUTPUTS
R
L
R
L
R
L
R
L
RLR
L
LINE
PHONO
TTM 56S
COMMERCIAL AUDIO
EQUIPMENT 24TJ
R
EFFECTS
SEND
UNBALANCED
FlexFX
RETURN
TIP = SEND
RING = RTN
BALANCED
4321
O
N
12.55"
3.0"
13.05"
.7" MAX PROJECTION
(WITHOUT CABLES)
.3" MAX
PROJECTION
.8" MAX
PROJECTION
HEADPHONES
PERFORMANCE MIXER
Rear View
Accessories
CASE 2 Road Case
is durable Pelican™ case has added space beneath the
mixer for headphones, cables, phono cartriges and other
small items. e case measures 7.5" x 15.75" x 19.75"
(19 x 40 x 50 cm) and weighs 9 pounds (4 kg).
Side View
MFC 1 Mixer Foam Cover
is dense foam cover is an inexpensive protection for mixer knobs and sliders.
e cover installs easily with two velcro straps. Put your TTM 56S in a suitcase
or backpack without fear of damaging the controls on the way to your show. e
cover measures a thin 1" x 10.5" x 13.5" (2.6 x 26.7 x 34.3 cm). e cover weight
is only 5.2 ounces (148 grams). Shipping weight is 1 pound (400 grams).
Front View
Views are 50% actual size
©Rane Corporation 10802 47th Ave. W., Mukilteo WA 98275-5098 USA TEL 425-355-6000 FAX 425-347-7757 WEB www.rane.com
Data Sheet-4
All features & specifications subject to change without notice. DOC 111499
Loading...