• High Power Headphone Monitor with Master/Cue Source Select
Optional XP 2016 Features
•
Active-Crossfader
™ with Full Range Contour Control
• A-POST-B Crossfader Assign Switches
• Stereo Master/Cue Meter with Peak Hold
• Six Channels of Stereo,
Accelerated-Slope
™, Full Cut,
3-Band Tone Controls.
Data Sheet-1
MP 2016
ROTARY MIXER
MP 2016 Block Diagram
MIC1 INPUT
2
3
1
MIC2 INPUT
2
3
1
GAIN
+
-
PAD
0 dB30 dB
GAIN
+
-
PAD
0 dB30 dB
INPUT 1
PH/LN
INPUT 2
PH/LN
INPUT 3
PH/LN
INPUT 4
PH/LN
INPUT/SELECT BOARD
MAIN MIX/OUTPUT BOARD
BASS TREBLE
BASS TREBLE
LINE
AUX 1
AUX 2
AUX 3
AUX 4
AUX 5
Vr
Vr
MIC 1
MIC 2
RIAA
RIAA
RIAA
RIAA
M1R
M2R
PHONOLINE
PHONOLINE
PHONOLINE
PHONO
MIC 1 DUCK
MIC 2 DUCK
INPUT
GAIN TRIM
INPUT
GAIN TRIM
INPUT
GAIN TRIM
INPUT
GAIN TRIM
INPUT
GAIN TRIM
INPUT
GAIN TRIM
GAIN/OL BOARD
15dB
15dB
15dB
15dB
15dB
15dB
SIG OL
SIG OL
SIG
SIG OL
SIG OL
SIG OL
OL
INTERNAL JUMPERS
DUCK MIC 1
DUCK MIC 2
MIX
LEVEL
MIX
LEVEL
MIX
LEVEL
MIX
LEVEL
MIX
LEVEL
MIX
LEVEL
CUE SELECT
XP 2016
IN/OUT
EXPAND PORT > XP 2016
XP2016
EFFECTS
IN/OUT
IN/OUT
MASTER
EFFECTS
TONE BOARD
CUE OUT TO METER
LOW
MID
Vr
GAIN/OL BOARD
EFFECTS LOOP
+10
OFF
HI
BOOTH
HEADPHONE
SELECT
2
4
3
1
SIG OL
R CH
MASTER
CUE
SEND
RETURN
MONO
CUE/MST
HOUSE
LEVEL
Vr
BOOTH
LEVEL
R CH
INPUT/SELECT BOARD
DUCKER
12 dB
LEVEL
L
LEVEL
R
HOUSE
+6 dB
+
-
3
BOOTH
TAPE OUT
POST EFFECTS
TAPE OUT
PRE EFFECTS
HEADPHONE
OUTPUT
2
4
3
1
2
1
MP 2016 General Description
For almost a decade, professional DJs have been waiting
for a quality rotary mixer. If you yell loud enough and long
enough, someone will listen. Rane proudly presents the MP
2016 Rotary Mixer.
The MP 2016 is a rotary-controlled mixer featuring six
Input Channels, Booth and House Outputs, Pre-Effects Tape
Outputs, Post-Effects Tape Outputs with Level control,
switchable Effects Loop, and Headphone Cueing. Input
Channels 1 through 4 feature high quality RIAA phono
preamplifiers which may be switched to line input via rear
panel switches. Input Channels 5 and 6 each provide a
balanced mic preamp with Input Gain trim, Mic/Line switch,
two-band EQ, Mic Engage switch and an internal Booth
Ducking enable jumper. In addition to the six dedicated
Data Sheet-2
preamplifiers, all six Input Channels may select any of the
five stereo Auxiliary Inputs.
Each Input Channel provides a 6-position source selector,
Input Gain control for matching levels, Signal/Overload
indicators and a studio-grade Master Mix control.
The Booth Output may select Master or Cue as its source.
An ultra-low noise, high power headphone amplifier also
allows monitoring the Master Mix or Cue Mix.
The Master Mix circuit provides Signal/Overload indicators, Mono switch and high-pass/rumble filters. In addition,
the MP 2016 features patent pending high performance threeband, full-cut, Accelerated-Slope™ tone controls.
The MP 2016 provides exceptional ergonomics, good feel
and a clean, intuitive layout packaged in a compact 19 inch,
3U rack mount chassis, a scant five inches deep.
XP 2016 Block Diagram
TONE
TONE
TONE
TONE
TONE
TONE
BUS ASSIGN
A
+10
POST
OFF
B
MID
BUS ASSIGN
A
+10
POST
OFF
B
MID
BUS ASSIGN
A
+10
POST
OFF
B
MID
BUS ASSIGN
A
+10
POST
OFF
B
MID
BUS ASSIGN
A
+10
POST
OFF
B
MID
BUS ASSIGN
A
+10
POST
OFF
B
MID
CONTOUR
R
CROSS
FADER
A LEFT
B LEFT
CH 1
BASSTREBLE
CH 2
BASSTREBLE
CH 3
BASSTREBLE
CH 4
BASSTREBLE
CH 5
BASSTREBLE
CH 6
BASSTREBLE
LEFT
MASTER
LEFTRIGHT
+10
+7
+4
+2
+0
-2
-4
-7
-10
-20
CONNECTOR -> MP 2016
CH 1
CH 2
CH 3
CH 4
CH 5
CH 6
TONE
+10
OFF
BASSTREBLE
MID
TONE
+10
OFF
BASSTREBLE
MID
TONE
+10
OFF
BASSTREBLE
MID
TONE
+10
OFF
BASSTREBLE
MID
TONE
+10
OFF
BASSTREBLE
MID
TONE
+10
OFF
BASSTREBLE
MID
BUS ASSIGN
A
POST
B
BUS ASSIGN
A
POST
B
BUS ASSIGN
A
POST
B
BUS ASSIGN
A
POST
B
BUS ASSIGN
A
POST
B
BUS ASSIGN
A
POST
B
MP 2016
ROTARY MIXER
A RIGHT
VC_AVC_A
VC_BVC_B
B RIGHT
RIGHT
MASTER
XP 2016 General Description
So you say…“Great, but to accommodate the diverse
needs of all DJ mixing styles, I need dedicated high performance three-band, full-cut, Accelerated-Slope tone controls
for each of the six Input Channels, high-performance Active-Crossfader™ with full range contour control, A-Post-B
crossfader assign switches and a stereo, 10 segment, peak
dBu Master/Cue meter with peak hold; all without effecting
the ergonomics of my classic rotary mixer.”
We’ve got you covered! With the flip of a switch on the
MP 2016 front panel, you can engage the optional XP 2016
External Processor and acquire all of these features.
The XP 2016 is an optional external processor designed
specifically for use with the MP 2016. The XP 2016 is
intended to mount above or below the MP 2016. It connects
with a single 10-inch ribbon cable and is engaged with the
flip of a switch on the MP 2016 front panel. If an XP 2016 is
not connected, the XP 2016 engage switch on the MP 2016
has no effect.
The XP 2016 provides dedicated Accelerated-Slope, 3-
band, full-cut tone controls for each of the six stereo Input
Channels, A-Post-B Crossfader Assign switches for all six
Input Channels, a high-performance Active Crossfader™ with
full range Contour control, and a stereo 10-segment peak dBu
Master/Cue Meter with peak hold.
The six stereo, post Mix Level signals in the MP 2016 are
fed to the XP 2016. When the XP 2016 is not engaged, the
post Mix Level signals go directly to the Master Mix in the
MP 2016. When the XP 2016 is engaged, the stereo Master
Mix comes from the XP 2016.
If all Input Channels on the XP 2016 are assigned PostCrossfader, the Mix will be identical to the MP 2016 (with the
addition of tone controls for each Input Channel). For
Crossfader control, simply assign a Channel to the A or B
side of the Crossfader. The Active Crossfader features a fullrange Contour control for smooth blending or ultra fast cuts.
The Master/Cue Meter follows the source selection of the
headphone monitor on the MP 2016. If Master is selected, the
XP 2016 Meter monitors the pre-house-level Master signal. If
Cue is selected, the XP 2016 meter monitors Cue Source
selection.
The XP 2016 matches the MP 2016 ergonomics, packaged
in a compact 19 inch, 3U rack mount chassis, 5 inches deep.