Rane KTM 6 User Manual

MT 6
MULTIPLE
TRANSFORMER
DATA SHEET
KTM 6
TRANSFORMER MOUNTING PLATE
General Description
e Rane KTM 6 is a panel kit used to mount amplifier dis­tribution transformers for the MA 6S. ree different transform­ers can be ordered:
• 100 W with 70.7 Vrms and 25 Vrms output taps
• 100 W with a 100 Vrms tap
• 300 W with 70.7 Vrms and 25 Vrms output taps.
ese transformers are user-mounted to a 19" wide rack­mount steel panel. Up to six 100 watt transformers or three 300 watt transformers can mount to the panel. 100 watt and 300 watt transformers can be mixed and matched. Some useable configurations: six 100 watt transformers...four 100 watt and one 300 watt transformers...two 100 watt and two 300 watt trans­formers... or three 300 watt transformers.
e KTM 6 panel and transformers are ordered and shipped in separate packages.
Note: ese are true transformers, not autoformers.
Parameter Specification Limit Units Conditions/Comments
Transformers: Rating 100 or 300 W Max continuous power
..........Connectors No. 8 [10] Screw Terminals On individual transformers
Inputs: Voltage 28.28 [48.99] Vrms 100 W [300 W]
..........Current 3.54 [6.12] Arms 100 W [300 W]
Output Tap 1: Voltage 70.7 {100} Vrms
..........Current 1.41 [4.24] {1} Arms 100 W [300 W]
Output Tap 2: Voltage 25.0 {na} Vrms
..........Current 4.0 [12.0] Arms 100 W [300 W]
Frequency Response 50-15 kHz +0/-3 dB
THD 0.02 .01 % +4 dBu, 20-20 kHz
Unit: Panel Construction 12 Gauge Steel Panel
..........Size-100 W 5.25"H x 19"W x 3"D (13.3 cm x 48.3 cm x 7.6 cm)
..........Size-300 W [5.25"H x 19"W x 3.75"D] [(13.3 cm x 48.3 cm x 9.5 cm)]
..........Weight (with 6 x 100 W) 21 lb (9.5 kg)
Shipping Carton Sizes: Panel 21" x 8" x 1.5" (53 cm x 20 cm x 4 cm)
..........Transformers 7.5" x 6" x 5.5" (19 cm x 15.4 cm x 14 cm)
Shipping Weight: Panel 4 lb (1.8 kg)
..........Transformers 4 lb 100 W [10 lb 300 W] (1.8 kg 100 W) [(4.5 kg 300 W)]
Items in [ ] refer to a 300 W 25/70.7 Vrms transformer Items in { } refer to a 100 W 100 Vrms transformer
Features
• 100 W or 300 W Rating per Transformer
• Tapped Secondaries:
TF 170 - 100 W/70.7 Vrms model - 25 Vrms & 70.7 Vrms
TF 370 - 300 W/70.7 Vrms model - 25 Vrms & 70.7 Vrms
• Special M6 Steel Lamination for Reliable Low Distortion Operation
• 3-Space Rack Mount
• Mix and Match 100 W and 300 W
• Wide Frequency Response
Data Sheet-1
70.7V / 100W 100V / 100W 300W
PRIMARY
100W
PRIMARY
300W
SEC.
100W
SEC.
300W
+70 +25
+70 +25
+100
2.8” 2.8”
28.28 V
3.54 A
48.99 V
6.12 A
70.7 V
1.414 A
70.7 V
4.24 A
{100 V} {1 A}
25 V 4 A
25 V 12 A
{N/A}
0 V
0 V 0 V
4.2”
2.15” 2.15” 3.2”
Items in { } are for 100W / 100V transformer
Electrical Diagram 100W
TF 170 = 100W/70.7V {TF 110 = 100W/100V}
Electrical Diagram 300W
TF 370 = 300W/70.7V
KTM 6
TRANSFORMER MOUNTING PLATE
Rear Panel
Architectural Specifications
e KTM 6 is a plate that may consist of up to (6) 100 W or (3) 300 W transformers mounted on a common 12 gauge steel panel. is steel panel is rack mountable and requires (3) rack spaces.
Each transformer shall have a separate primary winding and tapped secondary winding, with the primary rated for either 100 W, or 300 W, 8 Ω and the tapped secondary rated for 70.7 Vrms or 25 Vrms. (Please note that the 100 W, 100 V has only one secondary rated for 100 Vrms output.)
Frequency response shall be from 50-15 kHz (+0/–3 dB) with total harmonic distortion not to exceed 0.25% for 100 W output, or 0.5% for 300 W output.
Input and output wiring connectors shall be #8 screw termi­nals (100 W) or #10 screw terminals (300 W) attached to each transformer.
e transformer plate shall be a Rane Corporation model KTM 6.
Available Accessories
• MA 6s - Multichannel Amplifier
• TF 170 - Individual 100 W/70.7 and 25 Vrms Transformer
• TF 110 - Individual 100 W/100 Vrms Transformer
• TF 370 - Individual 300 W/70.7 and 25 Vrms Transformer
©Rane Corporation 10802 47th Ave. W., Mukilteo WA 98275-5098 USA TEL 425-355-6000 FAX 425-347-7757 WEB www.rane.com
Data Sheet-2
All features & specifications subject to change without notice DOC 103091
Loading...