RANDELL FX-1A User Manual

PROJECT NAME:

LOCATION:

ITEM NO:

FX SERIES

BUILT-IN MODEL FX-1A (LOW HEIGHT MODULAR)

Single refrigerated insert with unfinished top, low height. The FX Series revolutionizes point of use refrigeration
by allowing the operator to adjust the temperatures from -5°F (freezer) operation up to 40°F (refrigerator) or
any setting in between utilizing its unique convertible refrigeration system. Using a patented technology that
provides 100% in-drawer cooling, this ultra-efficient self-contained system provides precise temperature
control without compromising operator flexibility.

STANDARD FEATURES:

• Convertible Refrigeration System (Refrigerator to

Freezer)

• Point-of-use Size and Design

• Precise Temperature Control

• Patented In-drawer Cooling System

• Removable Insulated Drawer Compartment

• Ambient Drawer Track System

• Full-Extension Drawer System

• 100% Front Breathing

• Horizontal Gasket is Out of Harms Way

• Individual Compressor Per Drawer

REMOVABLE INSULATED INSERT: This

exclusive design allows full removal of the refrigerated
compartment for cleaning or pre-loading. Made of
high impact ABS plastic with high density polyurethane
insulation. Provides unparalleled insulation value with
no air gaps.

TEMPERATURE STATEMENT: The unit

is provided with a electronic temperature controller
that can be easily adjusted by the operator to any
temperature setting between -5°F (freezer) operation
up to 40°F (refrigerator).

QTY:

MODEL NO:

AIA NO:

SIS NO:

CSI SECTION: 11400

Single drawer unit with unfinished
top, low height. Model FX-1 shown.

REFRIGERATION SYSTEM: The FX Series

uses a patented in-drawer cooling system that directs
100% of the cooling inside the insulated and removable
drawer Insert (see below). The evaporator coil is mounted
horizontally above the drawer Insert with an integral gasket
that seals against the insulated drawer compartment
when closed. The refrigeration system operates only
when the drawer is closed, efficiently managing the
air-flow while reducing energy and humidity build-up.
Press-fit removable gasket with magnet-to-magnet seal is
standard.

DRAWER SYSTEM: The FX Series drawer system

is the only full-extension, full product view, drawer
system that has the drawer tracks outside the cooled
compartment offering a more reliable, durable system
not prone to the cold or debris environment common
in traditional drawer systems. The full-extension tracks
are constructed of corrosion resistant coated steel with
a fully integrated support system. The drawer box and
intermediate tracks are removable with simple tools and
can only be reinstalled one-direction for proper fit. The
drawer system has been tested with over 300,000 cycles
without failure (90 pound test load per drawer).

CABINET EXTERIOR: The cabinet exterior is

high grade stainless steel where seen to allow long use
and beauty while providing easy to maintain and clean
surfaces.

CABINET BASE/INTERIOR: The cabinet

interior is high grade stainless steel where seen to
allow long use and beauty while providing easy to
maintain and clean surfaces.

ELECTRICAL: Standard 115 volt with NEMA

5-15 cord and plug. Hard wired plug in multi-stack
applications, allows up to three units on one wall
circuit.

ORIGIN OF MANUFACTURE: Designed and

manufactured in the United States.

OPTIONS/ACCESSORIES:

Flange Kit for FX-1A (for

installation in equipment or
units by others)

Top Kit (43.3” x 28”,1.5” thick)

for Work Top Application

Top Kit (48” X 33”, 2” thick) for

Cooking Equipment Application

3.5” Caster Kit
6” Leg Kit
Additional Insulated Inserts:

Qty. _____
Pan Racks
Recessed Handle(s)
Poly Tub Divider
Stainless Steel Tub Divider

FX Series

PPSPECFX1A RevA

Revised 10/13

43.3"

[1100]

28"

[711]

27.7"

[704]

FX-1A (LOW HEIGHT MODULAR)

Incorporating

Adande®

Technology

14.7"

[374]

13.94"
[354]

TOP VIEW

9.2"

[234]

FRONT VIEW

43.3"

[1100]

33.70"
[856]

3.43"
[87]

9.41"

[239]

10.33"
[262]

RIGHT SIDE VIEW DRAWER EXTENDED

13.94"
[354]

28"

[711]

RIGHT SIDE VIEW

L D H

No. of

Drawers

Storage

(cubic feet)

Comp.

Size

Amp

Draw

(actual)

Refrig. Power

Usage

(per day)

Freezer

Power Usage

(per day)

Volt NEMA

Ship

Weight

(lbs)

43.3” 28” 14.7” 1 2.5 5.5cc 3.9 1.22kw 1.99kw 115 5-15p 245

1055 Mendell Davis Drive, Jackson, MS 39272, 888-994-7636, unifiedbrands.net

© 2013 Unified Brands. All Rights Reserved. Unified Brands is a wholly-owned subsidiary of Dover Corporation.