Rain Bird PEB-IVM, PESB-IVM Tech Spec

PEB-IVM and PESB-IVM Series Valves

Designed to Outperform. Engineered to Outlast.

Tech Spec

Pressure surges? Effluent water? Clogging
debris? No problem. PEBIVM and PESBIVM Series
valves offer long life and efficient, trouble-free
performance—even under harsh condi-tions.
Constructed of heavy-duty, glass-filled nylon,
these valves resist clogging. And the PESBIVM
model features a patented scrubber to actively
fight dirt, debris and particles.

Features

• Body constructed of durable glass-

lled nylon for long life and heavy-duty
performance at 200 psi (13.80 bar) pressure

• Stainless steel studs molded into the body.

Bonnet can be attached and removed
more easily without damaging threads

• One-piece solenoid design with captured

plunger and spring for easy servicing.
Prevents loss of parts during eld service

• External bleed protects the solenoid ports

from debris when system is ushed

• Internal bleed operates the valve without

allowing water into the valve box; allows
pressure regulator to be adjusted without
turning on the valve at the controller rst

• Low ow operating capability (0.25 gpm;

3

0.06 m

/h; 1.2 l/m) for a wide range of

applications. For ows below 5 gpm

3

(1.14 m

⁄h; 19.2 l/m) or any Xerigation®
application, install Rain Bird Y lter
upstream

• Slow closing to prevent water hammer and

subsequent system damage

• PESBIVM only: Scrubber scrapes its

stainless steel screen clean to break
down grit and plant material. Prevents
debris build-up a

nd clogging

Options (order separately)

• Accommodates optional, eld installed

PRS-D pressure regulating module to
ensure optimum sprinkler performance

• Optional purple ow control handles for

non-potable water applications

- PEB-NP-HAN1(1”)

- PEB-NP-HAN2 (1

1

⁄2” and 2”)

Operating Range

• Pressure: 20 to 200 psi (1.38 to 13.80 bar)

• Flow: 0.25 to 200 gpm (0.06 to 45.40 m

1.2 to 757 l/m)

3

⁄h;

low with PRS-D: 5 to 200 gpm

• F

• (1.14 to 45.40 m3⁄h; 19.2 to 757 l/m)

• Temperature: up to 150° F (66° C)

Electrical Specications

• Power: 26.5 Vrms 50/60 Hz (cycles/sec)

• Inrush current: <40mA (Peak)

• Quiescent current: <0.4mA (ave.)

• Voltage Range: 15.6 - 29.2 Vrms

• Compatible with LXIVM controllers

PEBIVM and PESBIVM Series Valve Pressure

100PEBIVM 1"150PEBIVM

Flow
GPM

0.25 0.8 - -

0.5 1.0 - ­ 1 1.3 - ­ 5 1.7 - ­ 10 1.8 - ­ 20 2.9 3.9 ­ 30 5.6 3.6 ­ 40 10.0 3.5 ­ 50 15.6 3.6 4.8
75 - 5.4 4.5
100 - 9.6 5.2
125 - 14.6 8.2
150 - 21.2 11.8
175 - - 15.5
200 - - 19.5

PEBIVM and PESBIVM Series Valve Pressure

Flow Flow
m⁄ h l/m

0.06 1 0.06 - -

0.3 5 0.09 - -

0.6 10 0.10 - -

1.2 20 0.12 - ­ 3 50 0.15 - ­ 6 100 0.32 0.26 ­ 9 150 0.68 0.24 ­ 12 200 - 0.26 0.33
15 250 - 0.33 0.32
18 300 - 0.42 0.32
21 350 - 0.57 0.34
24 400 - 0.74 0.41
27 450 - 0.92 0.51
30 500 - 1.14 0.64
33 550 - 1.38 0.77
36 600 - - 0.90
39 650 - - 1.04
42 700 - - 1.18
45 757 - - 1.34

Notes

1) Loss values are with flow control fully open.

2) PRS-D module recommended for all flow ranges.

Recommendations

1) Rain Bird recommends flow rates in the supply line not to exceed 7.5 ft./sec.
(2.29 m/s) in order to reduce the effects of water hammer.

2) For flows below 5 gpm (1.14 m⁄h; 19.21 l/m), Rain Bird recommends use of
upstream filtration to prevent debris from collecting below the diaphragm.

3) For flows below 10 gpm (2.27 m⁄h; 37.8 l/m) Rain Bird recommends the
flow control stem be turned down two full turns from the fully open position.

Loss (psi)

Loss (bar)

100PEBIVM

2.5 cm

11⁄2"

150PEBIVM

3.8 cm

200PEBIVM

2"

200PEBIVM

5.1 cm

Dimensions

Size Height Length Width

100 61⁄2” (16.5 cm) 4” (10.2 cm) 4” (10.2 cm)
150 8” (20.3 cm) 6” (15.2 cm) 6” (15.2 cm)
200 8” (20.3 cm) 6” (15.2 cm) 6” (15.2 cm)

Note: The PRS-D option adds 2” (5.1 cm) to valve height.

Models

• 100PEBIVM and 100PESBIVM

• 150PEBIVM and 150PESBIVM

• 200PEBIVM and 200PESBIVM

BSP threads available, specify when ordering.

1”

11⁄2”

2”

How To Specify

100 - PEBIVM - PRS-D

Size

100: 1"
150: 1½"
200: 2"

Note: Valve and PRS-Dial module must be ordered sepa­rately. For non-U.S. applications, it is necessary to specify
NPT or BSP thread type.

Model

PEBIVM
PESBIVM: scrubber
model

Optional Feature
PRS-Dial: pressure

regulating module

(m

ust be ordered

separately)

Specications

The electric remote control valve shall be a
normally closed 26.5 Vrms 50/60 Hz (cycles/
sec) solenoid actuated globe pattern design.
The valve pressure rating shall not be less than
200 psi (13.80 bar). The valve shall have the
following characteristics (circle one):

Flow rate: ________ gpm m

3

/h l/m

Pressure loss not to exceed: _______ psi bar

The valve body shall be constructed of
heavy-duty glass-lled UV-resistant nylon and
have stainless steel studs and ange nuts;
diaphragm shall be of nylon reinforced nitrile
rubber.

The valve shall have both internal and external
manual open/close control (internal and
external bleed) to manually open and close
the valve without electrically energizing
the solenoid. The valve’s internal bleed shall
prevent ooding of the valve box.

The valve shall house a fully-encapsulated,
one-piece solenoid. The solenoid shall have a
captured plunger with a removable retainer
for easy servicing and a leverage handle for
easy turning. This 26.5 Vrms 50/60 Hz latching

solenoid shall open between 15.6 and 29.2
Vrms with an inrush current less than 40mA.

The valve shall have a brass flow control stem
for accurate manual regulation and/or shut­off of outlet flow. The valve must open or
close in less than 1 minute at 200 psi (13.80
bar), and less than 30 seconds at 20 psi (1.38
bar).

The PESBIVM valve shall have a self-cleaning
stainless steel screen designed for use in dirty
water applications.

The valve construction shall be such as to
provide for all internal parts to be removable
from the top of the valve without disturbing
the valve installation.

Optional Feature Specication

PRS-D Pressure Regulating Module:
1

00PEBIVM-PRS-D
150PEBIVM-PRS-D
200PEBIVM-PRS-D

When so indicated on the design, the 1”
and 2” electric remote control plastic valves
shall have a pressure regulating module
(PRS-D) capable of regulating outlet pressure
between 15 and 100 psi (±3 psi) (1.04 and 6.90
bar (±0.21 bar)).

The PRS-D module shall have an adjusting
knob for setting pressure and Schrader valve
connection for monitoring pressure. The
pressure shall be adjustable from the PRS-D
when the valve is internally manually bled or
electrically activated.

Non-Potable Flow Control Handle *
PEB-NP-HAN1 - Fits 1”

PEB-NP-HAN2 - Fits 1

When so indicated on the design, the valve
shall have a purple ow control handle to
indicate to the user that non-potable water
is being used. There shall be no dierence
between the black and purple handles except
for the color.

*Rain Bird offers the PESBIVM-R reclaimed water valve and
conversion kits for reclaimed water application. Please see Tech
Spec D37338B, the Rain Bird catalog, or visit www.rainbird.com
for more information.

100PESBIVM-PRS-D
150PESBIVM-PRS-D
200PESB

1

⁄2” and 2”

IVM-PRS-D

1

⁄2”

, 1

Plastic Electric Remote Control PEBIVM

or PESBIVM Valve (with PRS-D)

Rain Bird Corporation

6991 E

. Southpoint Road
Tucson, AZ 85756
Phone: [phone]
Fax: [phone]

Rain Bird Technical Services

(800) RAINBIRD (1-800-724-6247)
(U.S. and Canada)

® Registered Trademark of Rain Bird Corporation

© 2020 Rain Bird Corporation 7/2020

Rain Bird Corporatio

970 West Sierra Madre Avenue
Azusa, CA 91702
Phone: [phone]
Fax: [phone]

n

Rain Bird International, Inc.

1000 West Sierra Madre Ave.
Azusa, CA 91702
Phone: [phone]
Fax: [phone]

The Intelligent Use of Water

www.rainbird.com

™

D41914