Tech Spec
PEB-IVM and PESB-IVM Series Valves
Designed to Outperform. Engineered to Outlast.
Pressure surges? Effluent water? Clogging debris? No problem. PEBIVM and PESBIVM Series valves offer long life and efficient, trouble-free performance—even under harsh condi-tions. Constructed of heavy-duty, glass-filled nylon, these valves resist clogging. And the PESBIVM model features a patented scrubber to actively fight dirt, debris and particles.
Features
•Body constructed of durable glassfilled nylon for long life and heavy-duty
performance at 200 psi (13.80 bar) pressure
•Stainless steel studs molded into the body. Bonnet can be attached and removed more easily without damaging threads
•One-piece solenoid design with captured plunger and spring for easy servicing. Prevents loss of parts during field service
•External bleed protects the solenoid ports from debris when system is flushed
•Internal bleed operates the valve without allowing water into the valve box; allows pressure regulator to be adjusted without turning on the valve at the controller first
•Low flow operating capability (0.25 gpm; 0.06 m3/h; 1.2 l/m) for a wide range of applications. For flows below 5 gpm (1.14 m3⁄h; 19.2 l/m) or any Xerigation® application, install Rain Bird Y filter upstream
•Slow closing to prevent water hammer and subsequent system damage
•PESBIVM only: Scrubber scrapes its stainless steel screen clean to break down grit and plant material. Prevents debris build-up and clogging
Options (order separately)
•Accommodates optional, field installed PRS-D pressure regulating module to ensure optimum sprinkler performance
•Optional purple flow control handles for non-potable water applications
-- PEB-NP-HAN1(1”)
-- PEB-NP-HAN2 (11⁄2”and 2”)
Operating Range
•Pressure: 20 to 200 psi (1.38 to 13.80 bar)
•Flow: 0.25 to 200 gpm (0.06 to 45.40 m3⁄h; 1.2 to 757 l/m)
•Flow with PRS-D: 5 to 200 gpm
•(1.14 to 45.40 m3⁄h; 19.2 to 757 l/m)
•Temperature: up to 150° F (66° C)
Electrical Specifications
•Power: 26.5 Vrms 50/60 Hz (cycles/sec)
•Inrush current: <40mA (Peak)
•Quiescent current: <0.4mA (ave.)
•Voltage Range: 15.6 - 29.2 Vrms
•Compatible with LXIVM controllers
PEBIVM and PESBIVM Series Valve Pressure
Loss (psi)
Flow 100PEBIVM 150PEBIVM |
200PEBIVM |
||
gpm |
1" |
11⁄2" |
2" |
0.25 |
0.8 |
- |
- |
0.5 |
1.0 |
- |
- |
1 |
1.3 |
- |
- |
5 |
1.7 |
- |
- |
10 |
1.8 |
- |
- |
20 |
2.9 |
3.9 |
- |
30 |
5.6 |
3.6 |
- |
40 |
10.0 |
3.5 |
- |
50 |
15.6 |
3.6 |
4.8 |
75 |
- |
5.4 |
4.5 |
100 |
- |
9.6 |
5.2 |
125 |
- |
14.6 |
8.2 |
150 |
- |
21.2 |
11.8 |
175 |
- |
- |
15.5 |
200 |
- |
- |
19.5 |
PEBIVM and PESBIVM Series Valve Pressure
Loss (bar)
Flow |
Flow |
100PEBIVM |
150PEBIVM 200PEBIVM |
|
m3⁄ h |
l/m |
2.5 cm |
3.8 cm |
5.1 cm |
0.06 |
1 |
0.06 |
- |
- |
0.3 |
5 |
0.09 |
- |
- |
0.6 |
10 |
0.10 |
- |
- |
1.2 |
20 |
0.12 |
- |
- |
3 |
50 |
0.15 |
- |
- |
6 |
100 |
0.32 |
0.26 |
- |
9 |
150 |
0.68 |
0.24 |
- |
12 |
200 |
- |
0.26 |
0.33 |
15 |
250 |
- |
0.33 |
0.32 |
18 |
300 |
- |
0.42 |
0.32 |
21 |
350 |
- |
0.57 |
0.34 |
24 |
400 |
- |
0.74 |
0.41 |
27 |
450 |
- |
0.92 |
0.51 |
30 |
500 |
- |
1.14 |
0.64 |
33 |
550 |
- |
1.38 |
0.77 |
36 |
600 |
- |
- |
0.90 |
39 |
650 |
- |
- |
1.04 |
42 |
700 |
- |
- |
1.18 |
45 |
757 |
- |
- |
1.34 |
Notes
1)Loss values are with flow control fully open.
2)PRS-D module recommended for all flow ranges.
Recommendations
1)Rain Bird recommends flow rates in the supply line not to exceed 7.5 ft./sec. (2.29 m/s) in order to reduce the effects of water hammer.
2)For flows below 5 gpm (1.14 m3⁄h; 19.21 l/m), Rain Bird recommends use of upstream filtration to prevent debris from collecting below the diaphragm.
3)For flows below 10 gpm (2.27 m3⁄h; 37.8 l/m) Rain Bird recommends the flow control stem be turned down two full turns from the fully open position.
Dimensions
Size |
Height |
Length |
Width |
100 |
61⁄2” (16.5 cm) |
4” (10.2 cm) |
4” (10.2 cm) |
150 |
8” (20.3 cm) |
6” (15.2 cm) |
6” (15.2 cm) |
200 |
8” (20.3 cm) |
6” (15.2 cm) |
6” (15.2 cm) |
Note: The PRS-D option adds 2” (5.1 cm) to valve height.
Models
|
100PEBIVM and 100PESBIVM |
” |
• |
150PEBIVM and 150PESBIVM |
11⁄2” |
• |
200PEBIVM and 200PESBIVM |
” |
BSP threads available, specify when ordering.
How To Specify
100 - |
PEBIVM - PRS-D |
|||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Size |
Model |
Optional Feature |
||||||
100: 1" |
|
PEBIVM |
PRS-Dial: pressure |
|||||
150: 1½" |
PESBIVM: scrubber |
regulating module |
||||||
200: 2" |
|
model |
(must be ordered |
|||||
|
|
|
|
|
|
separately) |
Note: Valve and PRS-Dial module must be ordered separately. For non-U.S. applications, it is necessary to specify NPT or BSP thread type.
Specifications
The electric remote control valve shall be a normally closed 26.5 Vrms 50/60 Hz (cycles/ sec) solenoid actuated globe pattern design.
The valve pressure rating shall not be less than 200 psi (13.80 bar). The valve shall have the following characteristics (circle one):
Flow rate: ________ gpm m3/h l/m Pressure loss not to exceed: _______ psi bar
The valve body shall be constructed of heavy-duty glass-filled UV-resistant nylon and have stainless steel studs and flange nuts; diaphragm shall be of nylon reinforced nitrile rubber.
The valve shall have both internal and external manual open/close control (internal and external bleed) to manually open and close the valve without electrically energizing
the solenoid. The valve’s internal bleed shall prevent flooding of the valve box.
The valve shall house a fully-encapsulated, one-piece solenoid. The solenoid shall have a captured plunger with a removable retainer for easy servicing and a leverage handle for easy turning. This 26.5 Vrms 50/60 Hz latching solenoid shall open between 15.6 and 29.2 Vrms with an inrush current less than 40mA.
The valve shall have a brass flow control stem for accurate manual regulation and/or shutoff of outlet flow. The valve must open or close in less than 1 minute at 200 psi (13.80 bar), and less than 30 seconds at 20 psi (1.38 bar).
The PESBIVM valve shall have a self-cleaning stainless steel screen designed for use in dirty water applications.
The valve construction shall be such as to provide for all internal parts to be removable from the top of the valve without disturbing the valve installation.
Optional Feature Specification
PRS-D Pressure Regulating Module: 00PEBIVM-PRS-D 100PESBIVM-PRS-D
150PEBIVM-PRS-D 150PESBIVM-PRS-D 200PEBIVM-PRS-D 200PESBIVM-PRS-D
When so indicated on the design, the 1”, 11⁄2” and 2”electric remote control plastic valves shall have a pressure regulating module (PRS-D) capable of regulating outlet pressure between 15 and 100 psi (±3 psi) (1.04 and 6.90 bar (±0.21 bar)).
The PRS-D module shall have an adjusting knob for setting pressure and Schrader valve connection for monitoring pressure. The pressure shall be adjustable from the PRS-D when the valve is internally manually bled or electrically activated.
Non-Potable Flow Control Handle * PEB-NP-HAN1 - Fits 1” PEB-NP-HAN2 - Fits 11⁄2”and 2”
When so indicated on the design, the valve shall have a purple flow control handle to indicate to the user that non-potable water is being used. There shall be no difference between the black and purple handles except for the color.
*Rain Bird offers the PESBIVM-R reclaimed water valve and conversion kits for reclaimed water application. Please see Tech Spec D37338B, the Rain Bird catalog, or visit www.rainbird.com for more information.
Plastic Electric Remote Control PEBIVM
or PESBIVM Valve (with PRS-D)
Rain Bird Corporation |
Rain Bird Corporation |
Rain Bird International, Inc. |
6991 E. Southpoint Road |
970 West Sierra Madre Avenue |
1000 West Sierra Madre Ave. |
Tucson, AZ 85756 |
Azusa, CA 91702 |
Azusa, CA 91702 |
Phone: (520) 741-6100 |
Phone: (626) 812-3400 |
Phone: (626) 963-9311 |
Fax: (520) 741-6522 |
Fax: (626) 812-3411 |
Fax: (626) 852-7343 |
Rain Bird Technical Services |
|
The Intelligent Use of Water™ |
(800) RAINBIRD (1-800-724-6247) |
|
www.rainbird.com |
(U.S. and Canada) |
|
|
® Registered Trademark of Rain Bird Corporation |
|
© 2020 Rain Bird Corporation 7/2020 |
D41914 |