Radio Shack 7-in-One Home Theater, 15-1935 Owner's Manual

Download

Page 1

15-1935.fm Page 1 Thursday, December 31, 1998 11:37 AM

Cat. No. 15-1935

OWNER’S MANUAL

7-in-One Home Theater

Remote Control

Please read before using this equipment.

Page 2

15-1935.fm Page 2 Thursday, December 31, 1998 11:37 AM

INTRODUCTION

Your RadioShack 7-in-One Home Theater Remote Control can replace up to seven infrared remote controls. You can use it to control your TV, VCR, cable converter, satellite receiv er, CD pl ay er, tune r, ph ono gr aph , video accessory, dig ital audio tape, cassette, or laser disc player.

Unlike some universal remote controls, this remote control is preprogrammed with the most commonly used commands and does not ha ve to learn its commands from the origina l remote controls. All you ha ve to d o is tell it which device’s remote controls you want to replace (by entering 3-digit codes).

This manual include s a list of many manufa cturers’ 3digit codes for your devices. Or, you can call the toll-free number at the bottom of every page for assistance.

The 7-in-One transm its bo th i nfr ar ed (IR) and ra dio fr equency (RF) signals, so you don’t need to be within “line-of-sight” to control devices. W ith the supplied I R/ RF Command Center, you can use the remote to control devices in any room of your home.

1998 Tandy Corporation.

RadioShack and Plug ’n Power are registered trademarks

X-10 is a registered trademark of X-10 (USA) Inc.

used by Tandy Corporation.

Need help? Call 1-800-763-9232

Page 3

15-1935.fm Page 3 Thursday, December 31, 1998 11:37 AM

CONTENTS

Preparation ........................................................................ 4

Installing Batteries ........................................................ 4

Setting the Clock .......................................................... 5

Quick Setup ....................................................................... 6

A Look at Your Remote .................................................... 8

Setting Up the Remote ................................................... 12

To Operate Your TV .................................................... 12

To Operate Your VCR or TV/VCR Combination ......... 16

To Operate Your Cable Converter .............................. 21

To Operate Your Satellite Receiver ............................. 24

To Operate Your CD Player ........................................ 26

To Operate Your Tuner/Receiver ................................ 29

To Operate Your Amplifier ........................................... 31

To Operate Other Devices .......................................... 33

Special Features ............................................................. 37

Searching for a Code .................................................. 37

Using the Sleep Function ........................................... 38

Converting Device Keys ............................................. 39

Volume Lock ............................................................... 40

Using the Macro Keys ................................................ 41

Setting Up Timed Sequences ..................................... 42

Setting Up the Home Theater Key .............................. 44

Clear All ................................................................. ..... 45

Using the IR/RF Command Center ............................. 46

Troubleshooting .............................................................. 49

Need help? Call 1-800-763-9232

Page 4

15-1935.fm Page 4 Thursday, December 31, 1998 11:37 AM

PREPARATION

INSTALLING BATTERIES

Your 7-in-One requir es four A AA alkal ine ba tteries (no t supplied), available at your local RadioShack store.

Cautions:

• Use only fresh batteries of the required size and recommended type.

• Do not mix old and new b atte ri es, di fferent t ype s o f batteries (standard, alkaline, or rechargeable), or rechargeable batteries of different capacities.

To install the batteries:

1. Press down on the ba ttery compar tment cover an d slide the cover off.

2. Place the batteries in the compartment, matching the polarity marks (+ and –) inside.

3. Replace the cover.

If the batteries are installed correctly and the red indicator does not light when you press batteries.

Cautions

• Dispose of old ba tteries promptly a nd properly. Do

• Always remove old or weak batteries. Batteries can

Notes:

• After you install batteries, the remote performs a

not burn or bury them.

leak chemicals that can destroy electronic parts.

test of the display for 10 s econds or until you press a key.

Need help? Call 1-800-763-9232

POWER

, replace the

Page 5

15-1935.fm Page 5 Thursday, December 31, 1998 11:37 AM

• To extend bat tery life, the display turns off after 10

seconds of keypad inactivity and turns on again when you press any key.

• Device codes you hav e programmed into the 7-in-

One remain stored in memory while you replace the batteries. However, you must reset the clock.

SETTING THE CLOCK

Follow these steps to set the clock on the 7-in-One’s display.

1. Hold down

2. Press

3. Press

4. Press

5. Press

SETUP

until TIMED SEQ. appears.

twice. CONFIGURE appears.

SELECT MENU

SELECT

. THEATR SEL appears.

again.

. TIME appears and the first digit in the time flashes. Enter the time in 12-hour format. AM/PM flashes.

6. If necessary, press and PM, then press

to toggle between AM

SELECT

. The day of the week

display appears.

7. Use

and to toggle through the day s of

the week until the current day appears, then press

SELECT

. The currently selected device and the cor-

rect time appear.

Need help? Call 1-800-763-9232

Page 6

15-1935.fm Page 6 Thursday, December 31, 1998 11:37 AM

QUICK SETUP

The steps in this sect ion tell you how to q uickly set up the 7-in-One to operate all of your devices.

To set up devices individually, or add a device after you have set up the 7-i n-One, see the appropriat e section under “Setting Up the Remote.”

For the best operatio n, you should be within 1 5

Note:

feet of the device you want to control. Follow these steps for quick setup.

1. Turn on all of the devices you are setting up.

2. Press

3. Hold down

4. Press

5. Press

6. Press

SETUP

until TIMED SEQ appears.

. CODE SETUP appears.

SELECT SELECT

. DEV SET UP appears.

again. TV appears.

7. Enter the first three-digit TV code listed for your TV’s brand in “Setup Codes for TVs” on Page 12, then press

8. Point the remote at your TV and press

SELECT

POWER

Y our TV should turn off. If it does not, enter the next code from the list and p ress

SELECT

again. When your TV turns off, press

then

VCR

POWER

. VCR

appears.

9. Enter the first t hree-digit VCR code listed fo r your VCR’s brand in “Setup Codes for VCRs” on Page 16 or “Setup Codes for TV/VCR Co mbos” on Page 19, then press

SELECT

Need help? Call 1-800-763-9232

Page 7

15-1935.fm Page 7 Thursday, December 31, 1998 11:37 AM

10. Point the remote at your VCR and press

POWER

Your VCR should turn off. If it does not, enter the next code from the list and press

POWER CBL

again. When your VCR turns off, press

. CABLE appears.

SELECT

then

11. Continue setting u p de vi c es by pr essi ng th e ap pr opriate device k ey, entering your devi ce’s code and pressing

SELECT

. Refer to the code list for the t yp e

of device you want to set up:

Setup Codes for Page

Amplifiers 32 Cable Converters 22 Cassette Players 34 CD Players 26 DAT Players 34 Satellite Receivers 24 DVD Players 34 Home Automation 35 Laser Disc Players 35 Miscellaneous Audio 35 Phonographs 36 Tuners/Receivers 29

12. Once the 7-in-One is operati ng all of your d evices,

ESC

press

to stop programming.

Need help? Call 1-800-763-9232

Page 8

15-1935.fm Page 8 Thursday, December 31, 1998 11:37 AM

A LOOK AT YOUR REMOTE

AMP, TUN, TV, CBL, CD, VCR, SAT,

PLUG ’N POWER

and

— let you select the device you want to control.

HOME THEATER

— lets you control all the functions of a

home theater system.

POWER LTS ON

— turns the remote on and off, and controls

in the PLUG ’N POWER mode.

— works like the Menu or OSD (on-scre en dis-

ALL

play) key on your original remote. Use , , , and (Menu Up, Down, Right and Le ft) to navigate your onscreen menus. If yo ur orig ina l remote h ad a Selec t key to select menu options , use

CLEAR (SHIFT

SELECT

in its place. Us e

) to exit/ cl e ar me n us . S e e your device’s origin al owner’s manual for more detailed i nstructions on using menus.

Notes:

• , , , and also control the Rear Lev el +/– and Balance Right/Left functions in AMP or TUN mode, and Disc +/– and Track +/– in CD mode.

SELECT

•

also controls TAPE MON in AMP or TUN mode, Disc Select in CD mode, and the Fetch function in the on-screen men u of an RCA s atel li te sys tem.

PROG (SHIFT

tem’s and cable con verter’s Guide func tion, as well as any device’s seco ndary menus .

SUR

(Surround) — operates the Surround mode. It also operates the favorite ch annel func tion in SAT an d CBL modes, 10+ (to access tracks numbered higher than 10) in CD mode, and the DISC function of a laser disc player.

Need help? Call 1-800-763-9232

) — operates your satellite s ys-

Page 9

15-1935.fm Page 9 Thursday, December 31, 1998 11:37 AM

SHIFT

— besides thos e functions d escribed el sewhere in this manual, works with these keys to control advanced features:

Mode Key Function

VCR

Satellite Receiver

Receiver/Tuner/Amplifier

Laser Disc/Cassette/DVD

PLAY REW FF STOP PAUSE MENU+ MENU– MENU+ MENU– MENU MENU PLAY REW FF STOP PAUSE STOP

SLOW REW SLOW (SLOW–) FF SLOW (SLOW+) EJECT X2 AUDIO+ AUDIO– CENTER LEVEL + CENTER LEVEL – DELAY+ DELAY– REVERSE PLAY REW SLOW FF SLOW EJECT X2 EJECT

ESC

(Escape) — lets you exi t the remote’s displayed

menu.

CENTER

REAR (SHIFT

and

CENTER

) — work like the Add and Delete keys on y our original TV remote, the DISC A and B keys on your laser disc remo te, or the SAT and AUDIO keys of a satellite system remote.

VOL+

(Volume Up),

VOL–

(Volume Down) and

MUTE —

control the volume li ke the Volume Up and Down a nd Mute keys on your original remote. In Plug n’ Power mode,

VOL+/VOL–

operates

operates Bright and Dim and

ALL OFF

Need help? Call 1-800-763-9232

MUTE

Page 10

15-1935.fm Page 10 Thursday, December 31, 1998 11:37 AM

SLEEP (SHIFT

MUTE

) — controls the Sleep Timer in TV, CABLE, SAT, and AMP or TUN m odes fo r devic es which have this feature. If your devic e does not hav e a Sleep Timer,

SLEEP

activates the remote’s built-in sleep

timer.

CH+

(Channel Up) and

CH–

(Channel Down) — work like the Channel Up and Down keys on your original remote.

CH+

and

also control Preset Up/Preset

CH–

Down in AMP or TUN mode and ON/OFF in Plug n’ Power mode.

Digit Keys (0–9)

— work like the digit keys on your original remote. They also co ntrol Input Selectio ns in AMP or TUN mode.

ENTER

— works like the Enter key on your original re-

mote (for example, to change channels).

TV/VCR

satellite remote.

— works like the TV/ SAT key on your original

TV/VCR

also controls TV/Video i n TV mode, TV/VCR in VCR mode, A/B in cable and CD modes, and Input Select in AMP or TUN mode.

LAST

(Last Channel) — works like the P revious Chan nel or Recall key o n your original remote. It also operates the RANDOM functions in the CD and AMP or TUN modes.

AUDIO

keystrokes, so you can repeat them in sequence in any mode at the press of a single key.

REW

(Rewind), PL (Play), FF (Fast Forward), (Record), keys on your original VCR or Laser Disc player remotes. To guard against accid entally recording over a videotape, you must press

VIDEO

and

STOP

(Macro Keys) — memo rize up to 15

PAUSE

, and

REC

twice before recording.

Need help? Call 1-800-763-9232

REC

— work like the transport

Page 11

15-1935.fm Page 11 Thursday, December 31, 1998 11:37 AM

LAST

— works like the Pr ev io us Chan nel or Re ca ll ke y

on your original TV remote.

DISPLAY (SHIFT

LAST

) — controls the Display function of your devices. If you ar e operating an RCA satellite system,

DISPLAY

controls the Select function in your On-Screen Guid e and Disp lay when you are vie wing a program. If you are operating a CD player, it controls the Time function.

PIP

— controls your TV or VCR’s Picture-in-Picture feature. Works like the VIEW key on your satellite receiver’s remote.

FREEZE (SHIFT

PIP

) — freezes your Picture-in-Picture

window.

SWAP

— swaps the Pic ture-in-Pictu re window and the

main picture.

MOVE PIP

— moves the Picture-in-Picture window around the screen. Works like the Next key on your satellite receiver’s remote.

LITE

— lets you turn the remote’s backlight and display

LITE

on and off. When y ou press

to turn on the back light, the backlight stays lit for 5 seconds then lights again anytime you press a key. To turn off the backlight,

LITE

press

again.

SETUP

menu to program your 7-in-One.

— lets you use the remote’s displayed menu

Need help? Call 1-800-763-9232

Page 12

15-1935.fm Page 12 Thursday, December 31, 1998 11:37 AM

SETTING UP THE REMOTE

For the best operation , you should be within 15

Note:

feet of the device you want to control.

TO OPERATE YOUR TV

Locate the codes for you r TV i n “Set up Code s for TVs ” and write them in the space bel ow. The brands are listed in alphabetical orde r, with the most popular codes listed first.

Codes: _____________________________________ Then follow these steps t o progr am the 7-i n- One to op -

erate your TV.

1. Turn on your TV.

2. Press

then hold down

SETUP

until TIMED SEQ

appears.

3. Press

4. Repeatedly press

. CODE SETUP appears.

SELECT

until TV appears.

5. Enter the first th ree-digit code listed for y our TV’s brand, then press

6. Point the 7-in-One at your TV and press

SELECT

POWER

Y our TV should turn off. If it does not, enter the next code from the list and pr ess

SELECT

again. When your TV turns off, press

then

ESC

POWER

to stop

programming.

Setup Codes for TVs

Brand Codes

Abex Admiral Adventura Aiko

032 093 046 092

Need help? Call 1-800-763-9232

Brand Codes Akai Alaron A-Mark Ambassador Anam

National

030 179, 183 003 177 055

Page 13

15-1935.fm Page 13 Thursday, December 31, 1998 11:37 AM

Brand Codes Anam AOC

Archer Audiovox

Baysonic Belcor Bell & Howell Bradford Brockwood Broksonic Candle

Carnivale Carver CCE Celebrity Cineral Citizen

Clairtone Concerto Contec

Craig Crosley Crown Curtis Mathes

CXC Daewoo

Daytron Denon

180 019, 030, 003,

052, 185 003 092, 451, 180,

003 180 019 154, 016 180 019 236, 463, 003 030, 056, 046,

186 030 054 217 000 092, 451 060, 030, 056,

092, 186, 280, 046, 039

185 056 180, 157, 158,

185 180 054 180, 039 047, 054, 060,

030, 056, 451, 154, 051, 016, 039, 093, 145

180 451, 092, 019,

091, 039 019 145

Brand Codes Dumont Electroband Electrohome Emerson

Envision Fisher Fujitsu Funai Futuretech GE

Gibralter Goldstar

Gradiente Grunpy Hallmark Harley

Davidson Harvard Hitachi

Infinity Inteq Janeil JBL JCB JVC

Kawasho

017, 019 000, 185 381, 389, 409 236, 463, 019,

180, 280, 179, 154, 177, 178, 181, 182, 183, 185, 270, 282, 038, 158, 039

030 154, 159 179 171, 180, 179 180 047, 051, 055,

451, 021, 178, 027, 029, 135, 279, 282, 174, 093

017, 019, 030 019, 030, 056,

178, 001, 002, 032, 106, 409

053, 056 180, 179 178 179

180 145, 151, 056,

032, 038, 279, 409, 413

054 017 046 054 000 053, 036, 069,

160, 169, 182 158

Need help? Call 1-800-763-9232

Page 14

15-1935.fm Page 14 Thursday, December 31, 1998 11:37 AM

Brand Codes Kaypani KEC Kenwood Kloss KMC KTV

LG Logik Luxman LXI

Magnavox

Majestic Marantz Matsushita Megatron MEI Memorex

MGA

Midland

Minutz Mitsubishi

Motorola MTC

Multitech NAD NEC

052 180 019, 030 024, 046 106 180, 280, 030,

183, 185, 039, 217

056 016 056 047, 054, 156,

154, 178, 148 054, 096, 186,

187, 179, 030, 020, 024, 028, 036, 386

016 054, 030 250 145, 178, 003 185 150, 154, 016,

056, 178, 106, 250

150, 019, 030, 178, 155

047, 017, 039, 051, 032, 135

021 150, 019, 093,

178, 155 093, 055 019, 060, 030,

056, 091, 185 180, 217 156, 178, 166 030, 019, 056,

036

Brand Codes Nikko Noblex Noshi NTC Onwa Optimus Optonica Orion Panasonic JC Penney

Philco

Philips Pilot Pioneer Portland Prism Proscan Proton Pulsar Quasar

RadioShack

RCA

Realistic

Rhapsody

092, 030, 178 430 018 092 180 154, 250, 166 093, 165 236, 463, 179 250, 051, 055 047, 156, 019,

060, 051, 030, 056, 178, 002, 003, 018, 021, 027, 135, 032, 149, 039

054, 096, 019, 145, 030, 020, 028, 463

054 030, 019, 039 038, 166 092, 019, 039 051 047 178, 003, 052 017, 019 250, 051, 055,

165 047, 019, 180,

154, 030, 056, 178, 165, 409, 032, 039

047, 018, 019, 051, 029, 038, 090, 278, 135, 174, 093

019, 180, 165, 154, 030, 056, 178, 032, 039

185, 183

Need help? Call 1-800-763-9232

Page 15

15-1935.fm Page 15 Thursday, December 31, 1998 11:37 AM

Brand Codes Runco Sampo

Samsung

Samsux Sansei Sansui Sanyo Scimitsu Scotch Scott

Sears

Semivox Semp Sharp

Shogun Signature Simpson Sony Soundesign

Spectricon Squareview SSS Starlite Supre-Macy Supreme Sylvania

Symphonic Tandy

017, 030 030, 032, 052,

039 060, 019, 030,

056, 178, 032, 427, 482

039 451 463 154, 159, 146 019 178 236, 019, 180,

179, 178 047, 054, 156,

179, 154, 056, 171, 178, 146, 148, 149, 159

180 156 093, 165, 153,

157, 386, 039 019 016 186, 187 000, 080 180, 179, 178,

186 003 171 019, 180 180 046 000 054, 096, 030,

020, 028, 381 171 093

Brand Codes Tatung Technics Techn ol Ace Techwood Tekni ka

Telefunken TMK Tosh iba

Toso nic Totevision Trical Universal Vector

Research Victor Vidikron Vidtech Viking Wards

Yamaha Zenith Zonda

055, 003 250, 051 179 051, 056, 003 054, 150, 019,

060, 180, 179, 016, 056, 092, 186, 312, 039

056 177, 056, 178 156, 060, 154,

036, 149 185 039 157 027 030

053 054, 242 019, 178, 036 046, 312 054, 019, 165,

179, 021, 016, 030, 056, 178, 020, 027, 028, 029, 080, 096, 174

019, 030 017, 092, 016 003

Need help? Call 1-800-763-9232

Page 16

15-1935.fm Page 16 Thursday, December 31, 1998 11:37 AM

TO OPERATE YOUR VCR OR TV/VCR COMBINATION

Locate the codes for your VCR or TV/VCR combination in “Setup Codes for VCRs” on Page 16 or “Setup Codes for TV/VCR Combos” on Page 19 and write the codes in the space below. The brands are listed in alphabetical order, with the most popular codes listed first.

Codes: _____________________________________ Then follow these steps to program your 7-in-One to op-

erate your VCR or TV/VCR combination.

1. Turn on your VCR or TV/VCR combination and insert a tape.

2. Press

VCR

3. Hold down

4. Press

5. Repeatedly press

SETUP

until TIMED SEQ appears.

. CODE SETUP appears.

SELECT

until VCR appears.

6. Enter the first three-digit VCR code listed for your VCR’s brand, then press

7. Point the 7-in-One at the VCR and press

(Play). Your VCR should turn off or start to play.

SELECT

POWER

If it does not, enter the nex t co de fr om the c od e list

SELECT

then VCR turns off or plays, press

and

POWER

or PL again. When your

ESC

to stop program-

ming.

Setup Codes for VCRs

Brand Codes

Admiral Adventura Aiko

048 000 278

Need help? Call 1-800-763-9232

Brand Codes Aiwa Akai

American High

037, 000 041, 049, 053,

061, 106 035

Page 17

15-1935.fm Page 17 Thursday, December 31, 1998 11:37 AM

Brand Codes Asha Audiovox Beaumark Bell & Howell Broksonic

Calix Canon Capehart Carver CCE Cineral Citizen Colt Craig

Curtis Mathes

Cybernex Daewoo Daytron Denon Dynatech Electrohome Electrophonic Emerex Emerson

Fisher

Fuji Funai Garrard

240 037 240 104 209, 184, 479,

002, 121, 21 1, 295, 361

037 035 020 081 072, 278 278 037, 278 072 240, 037, 047,

072, 271 060, 035, 041,

162 240, 051 045, 278, 020 020 042 000 037 037 032 184, 209, 479,

037, 002, 043, 000, 121, 278, 036, 061, 068, 208, 21 1, 212, 294, 295, 361

104, 047, 066, 054

035, 033 000 000

Brand Codes

Go Video Goldstar Gradiente Harley

Davidson Harman/

Kardon Harwood Headquarter HI-Q Hitachi

Jensen JVC

KEC Kenwood KLH Kodak Lloyd’s Logik LXI Magnasonic Magnavox

Magnin Marantz Marta Matsushita MEI Memorex

MGA

060, 202, 035, 240, 048, 065

232, 279, 432 037, 038 008, 000 000

038, 075

072, 068 046 047 042, 105, 041,

000, 065, 166, 396

041 041, 008, 067,

206 037, 278 041, 067, 038 072 035, 037 000, 208 072 037 278 035, 081, 039,

000, 110, 149 240 035, 081 037 162, 035, 454 035 035, 162, 037,

039, 047, 000, 240, 048, 104, 046

043, 240, 061

Need help? Call 1-800-763-9232

Page 18

15-1935.fm Page 18 Thursday, December 31, 1998 11:37 AM

Brand Codes

MGN Technology

Minolta Mitsubishi

Motorola MTC Multitech NEC

Nikko Nikon Noblex Olympus Optimus

Optonica Orion

Panasonic

JC Penney

Pentax Philco Philips

Pilot Pioneer Portland Profitronic Proscan Protec Pulsar Quarter Quartz Quasar

240

042, 105 043, 067, 048,

061, 075, 173 035, 048 000, 240 000, 072 038, 041, 067,

104, 040 037 034 240 035 037, 048, 104,

162, 454, 432 062 184, 479, 002,

295 162, 035, 254,

378, 454 035, 037, 042,

240, 038, 040, 054

042, 065, 105 035, 209, 479 081, 035, 110,

062 037 067, 162 020 240 060, 202 072 039, 051 046 046 035, 162, 454

Brand Codes RadioShack Radix Randex RCA

Realistic

Ricoh Runco Salora Samsung

Sanky Sansui

Sanyo

Scott

Sears

Semp Sharp Shintom Shogun Singer Sony

STS Sunpak Sylvania

Symphonic Tatung

037, 000 037 037 060, 202, 035,

042, 240, 048, 065, 105, 106, 149

035, 037, 047, 000, 048, 104, 066, 062, 046

034, 253 039 075 240, 045, 051,

053 048, 039 000, 041, 067,

082, 271, 479 104, 047, 240,

046 043, 045, 184,

121, 210, 211, 212

035, 104, 037, 047, 042, 000, 066, 046, 054, 105

045 048, 062 072 240, 051 072 032, 033, 034,

000, 035, 253 042 253 081, 035, 043,

000, 110 000 041

Need help? Call 1-800-763-9232

Page 19

15-1935.fm Page 19 Thursday, December 31, 1998 11:37 AM

Brand Codes TEAC Technics Teknika Thomas TMK Toshiba

Totevision Unitech Universum Vector

Research Vector Video

Concepts Videosonic Wards

White Westinghouse

XR-1000 Yamaha Zenith

041, 000 162, 035 035, 037, 000 000 240, 036, 208 045, 043, 066,

210, 212, 366 037, 240 240 325 038, 040

045 045, 040, 061

240 060, 035, 047,

042, 000, 240, 048, 081, 072, 062, 149, 212

278

035, 000, 072 038 039, 000, 034,

033

Setup Codes for TV/VCR Combos

Brand Codes

American High

Broksonic Colt Curtis Mathes Daewoo Emerson Funai GE

Hitachi Lloyds MGA Magnavox

Magnin Memorex Mitsubishi Optimus Orion Panasonic

JC Penney Quasar RCA

Samsung Sansui Sanyo Sears Sony Symphonic Zenith

035*

002, 479 072 035* 278 002, 294, 479 000 035*, 060*,

048*, 240 000 000 240 000, 035*,

081* 240 037, 162* 048* 1162* 002, 479 035*, 162*,

1162* 035*, 240 035*, 162* 035*, 060*,

048* 240* 000, 479 240 000, 037 032* 000 000

Need help? Call 1-800-763-9232

Page 20

15-1935.fm Page 20 Thursday, December 31, 1998 11:37 AM

If your TV/VCR works using a c ode ( from the ta -

Note:

ble) highlighted with an asterisk (*) , you might n eed to program a separate TV code to control the volume. Check the list below and follow the instructions in “To Operate Your TV” o n Page 12 to program the suppli ed TV code.

VCR Code

032 000 035 051 048 093 060 047 081 054 162 250 240 060

Code for TV

V olume Control

Need help? Call 1-800-763-9232

Page 21

15-1935.fm Page 21 Thursday, December 31, 1998 11:37 AM

TO OPERATE YOUR CABLE CONVERTER

Locate the codes for your cable converter in “Setup Codes for Cable Converters” on Page 22 and write them in the space below. The brands are listed in alphabetical order, with the most popular codes listed first.

Codes: _____________________________________ Follow these steps to pr ogram the 7- in-One to operate

your cable converter.

1. Turn on your cable converter.

2. Press

3. Hold down

4. Press

5. Repeatedly press

CBL

SETUP

until TIMED SEQ appears.

. CODE SETUP appears.

SELECT

until CABLE appears.

6. Enter the first three-di git code listed for your converter’s brand, then press

SELECT

7. Point the 7-in-One at the cable converter and press

POWER

. Your ca ble converter should turn off. If it does not, enter the nex t code in the code list and press

SELECT

then

cable converter turns off, press

POWER

again. When your

ESC

to stop pro-

gramming.

: If your original cable conver ter remote does not

Note

have an ON key, pre ss

CH+

on the 7-in-One to turn on

your cable converter.

Need help? Call 1-800-763-9232

Page 22

15-1935.fm Page 22 Thursday, December 31, 1998 11:37 AM

Setup Codes for Cable Converters

Brand Codes

ABC

Allegro Antronix Archer

Cabletenna Cableview Century Citizen Colour Voice Comband Comtronics Contec Digi Eastern Electricord Emerson Everquest Focus Garrard GC

Electronics GE Gemini General

Instrument GMI Goldstar Goodmind Hamlin

Hitachi

003, 008, 014, 007, 017, 013, 011, 001

153, 315 022, 207 797, 153, 022,

207 022 022 153 153, 315 025, 031 232, 233 040, 060 019 637 002 078 797 015, 040 400 153 207

232, 233 015, 057, 242 276, 003, 011,

476 057 144, 040 797 020, 009, 259,

034, 273 011

Brand Codes Hytex Jasco Jerrold

Macom Magnavox Memorex Movie Time Novaplex NSC Oak Optimus Panasonic Panther Paragon Philips

Pioneer

Popular Mechanics

Pulsar RadioShack RCA Realistic Recoton Regal

Regency Rembrandt Runco Samsung Scientific

Atlanta Signal Signature

007 153, 315 003, 276, 014,

476, 012, 011, 015, 024

033 027, 334 000 063, 156 618 063, 156 007, 019 021 107, 000, 021 637 000 153, 025, 027,

031, 242, 290, 334

144, 533, 023, 260

400

000 883, 015, 315 021 207 400 020, 259, 273,

279 002 011 000 144, 040 008, 477, 017,

006 015, 040 011

Need help? Call 1-800-763-9232

Page 23

15-1935.fm Page 23 Thursday, December 31, 1998 11:37 AM

Brand Codes SL Marx Sprucer Starcom Stargate Starquest Sylvania Tandy TeleCaption Teleview Texscan Timeless Tocom Toshiba Tusa TV86 Unika United

Artists United Cable Universal

Videoway Viewstar

Zenith Zentek

040 021, 307 003, 015 015, 040, 797 015 001 258 221 040 001 418 012, 013 000 015 063 022, 153, 207 007

003 191, 077, 022,

153, 207 250 063, 027, 060,

211, 258 000, 525 400

Need help? Call 1-800-763-9232

Page 24

15-1935.fm Page 24 Thursday, December 31, 1998 11:37 AM

TO OPERATE YOUR SATELLITE RECEIVER

Locate the codes for your satellite receiver in “Setup Codes for Satellite Receivers” on Page 24 and write them in the space below. The brands are listed in alphabetical order, with the most popular codes listed first.

Codes: _____________________________________ Then follow these steps t o progr am the 7- in- On e to op -

erate your satellite receiver.

1. Turn on your satellite receiver.

2. Press

3. Hold down

4. Press

5. Repeatedly press

SAT

SETUP

until TIMED SEQ appears.

. CODE SETUP appears.

SELECT

until SAT appears.

6. Enter the first code liste d for your receiv er’s brand then press

SELECT

7. Point the 7-in-One at the satellite receiver and

POWER

press

. Your satellite receiver should turn off. If it does not, enter the next code in the code list and press

SELECT

satellite receiver turns off, press

then

POWER

again. When your

ESC

to stop pro-

gramming.

Setup Codes for Satellite Receivers

Brand Codes

AlphaStar Amplica Amway

772 072 043, 075

Brand Codes

Astro Industries

BSR Cable

Innovations Capetronic Century

095

095 554

095 538

Need help? Call 1-800-763-9232

Page 25

15-1935.fm Page 25 Thursday, December 31, 1998 11:37 AM

Brand Codes

Channel Master

Chaparral Citoh Conifer Curtis Mathes DX Antenna Drake

Echostar

Expressvu General

Instrument HTS Hitachi Homecable Hughes

Network Systems

Hytek IQ IQ Prism Intersat JVC Janeil Jerrold Legend Macom Magnavox Memorex Norsat Panasonic Pansat Philips Pico Primestar

018, 212

053, 209, 216 164 004 061, 072 041 018, 064, 149,

245 148, 159, 218,

269, 280, 775 775 050, 361, 547,

554, 869 775 819 238 749

095 210 210 043 775 152 361, 627 269 018, 050, 061 724 269, 724 004 152, 701 647 200, 724 075 361, 627

Brand Codes Prosat RCA RadioShack Ramsey Realistic STS Sony Star Choice Star Trak Strong Toshiba Town &

Country Uniden

Zenith

158 566 554 075 051, 052 041, 210 639 869 180, 421, 547 421 061, 082, 790 547

052, 074, 076, 238, 296, 370, 554, 724

061, 064

Need help? Call 1-800-763-9232

Page 26

15-1935.fm Page 26 Thursday, December 31, 1998 11:37 AM

TO OPERATE YOUR CD PLAYER

Locate the codes for your CD player in “Setup Codes for CD Players” and write them in the space below. The brands are listed in alphabetical order, with the most popular codes listed first.

Codes: _____________________________ Follow these steps to program the 7-in-One to op erate

your CD Player.

1. Turn on your CD player and insert a disc.

2. Press

3. Hold down

4. Press

5. Repeatedly press

SETUP

until TIMED SEQ appears.

. CODE SETUP appears.

SELECT

until CD appears.

6. Enter the first code listed for your CD player’s brand then press

SELECT

7. Point the 7-in-One a t the CD player and press Your CD player should play. If it does not, enter the next code in the code list and press

again. When the CD player pl ays, press

SELECT

then

ESC

stop programming.

Setup Codes for CD Players

Brand Codes

ADC Acoustic

Research Adcom Aiwa Akai

018, 033 123

155, 234 012, 124, 157 156

Brand Codes

Audio Alchemy

AudioTechnica

BSR Bang &

Olufsen Burmester California

Audio Lab

194

170

194, 245 212

420 029

Need help? Call 1-800-763-9232

Page 27

15-1935.fm Page 27 Thursday, December 31, 1998 11:37 AM

Brand Codes Capetronic Carrera Carver

Crown DAK DKK Denon Emerson

Fisher

GE Garrard

Genexxa GoldStar Harman/

Kardon Hitachi Inkel JVC Kenwood Kodak Krell Kyocera LXI Linn Luxman MCS MTC Magnavox

Marantz

McIntosh Mission Mitsubishi

237, 690 194 157, 179, 299,

437 122 245 000 003 155, 164, 305,

469 048, 088, 174,

179, 342 009 245, 280, 393,

420, 425 032, 164, 305 030, 417 108, 426

032, 139, 155 065 072, 655, 658 028, 037, 048 287 157 018 305 157 093, 149, 327 029, 043 420 038, 129, 157,

305 005, 029, 038,

157, 180 287 157 098

Brand Codes NAD NEC Nakamichi Nikko

Onkyo Optimus

Panasonic

Parasound Philips Pioneer

Proton QED Quasar RCA

Realistic

Rotel SAE STS Sansui

Sanyo Scott Sears Sharp

Sherwood

Shure

019, 299 043, 130, 234 147 164, 169, 170,

174 101, 102, 138 000, 032, 037,

048, 087, 145, 175, 179, 194, 196, 280, 305, 342, 420, 426, 437, 468, 536, 671, 690, 775

029, 303, 367, 752

194, 420 157, 274, 287 032, 244, 305,

468 152, 157 157 029 009, 053, 155,

179, 305, 764 155, 164, 175,

179, 180, 237, 420

157, 420 157 018 157, 202, 216,

305 087, 179 155, 164, 305 305 037, 180, 262,

265 065, 180, 196,

426 043

Need help? Call 1-800-763-9232

Page 28

15-1935.fm Page 28 Thursday, December 31, 1998 11:37 AM

Brand Codes Signature Sony

Soundesign Symphonic Tascam Teac

Technics Toshiba Vector

Research Victor Wards Yamaha Yorx

108 000, 185, 490,

604, 605 145, 425 183 420 016, 045, 153,

174, 180, 183, 378, 393, 420

029, 207, 303 019, 299 033, 194, 417

072 053, 108, 157 036, 170, 187 461

Need help? Call 1-800-763-9232

Page 29

15-1935.fm Page 29 Thursday, December 31, 1998 11:37 AM

TO OPERATE YOUR TUNER/ RECEIVER

Locate the codes for your tuner/receiver in “Setup Codes for Tuners/Receivers” on Page 29 and write them in the space below. The brands are listed in alphabetical order, with the most popular codes listed first.

Codes: _____________________________________ Then follow these steps to program the 7-in-One to op-

erate your tuner/receiver.

1. Turn on your tuner/receiver.

2. Press

3. Hold down

4. Press

5. Repeatedly press

TUN

SETUP

until TIMED SEQ appears.

. CODE SETUP appears.

SELECT

until TUNER appears.

6. Enter the first c ode listed for your devic e’s brand then press

SELECT

7. Point the 7-in-One at the tuner/receiver and press

POWER

. Your tuner/receiver should turn off. If it does not, enter the next code in the code list and press

SELECT

then

tuner/receiver turns off, press

POWER

again. When the

ESC

to stop pro-

gramming.

Setup Codes for Tuners/Receivers

Brand Codes

ADC Adcom Admiral

531 616 182

Brand Codes

Aiwa

Akai Bose Capetronic Carver

121, 125, 158, 189, 405

076, 224 639 531 008, 042, 189,

360, 412

Need help? Call 1-800-763-9232

Page 30

15-1935.fm Page 30 Thursday, December 31, 1998 11:37 AM

Brand Codes Casio Clarinette Curtis Mathes Denon Emerson Fisher Garrard

Harman/ Kardon

Inkel JVC Jensen Kenwood

Koss LXI Linn Lloyd’s Luxman MCS Magnavox

Marantz

Modulaire NAD NEC NTDE

Geniesom Nakamichi Onkyo

Optimus

Orient Power

195, 201 195 080, 201 004, 273, 771 424 042, 219, 360 281, 286, 424,

440, 463, 744 110

062 074, 464 754 027, 077, 186,

313, 314 424, 744 181, 744 189 195 166 039, 201, 346 128, 189, 195,

531 006, 039, 128,

189, 412 195 320 235 744

347 100, 119, 135,

380 042, 080, 177,

181, 186, 219, 286, 440, 531, 622, 670, 738, 744, 754, 801

744

Brand Codes Panasonic JC Penney Philips Pioneer

Quasar RCA

RadioShack Realistic

Sansui Sanyo Scott Sears Sharp Sherwood Sonic Sony Soundesign Symphonic Teac

Techni cs Techwood Victor Wards

Yamaha Yorx Zenith

039, 309 195, 201 189, 412 014, 080, 150,

289, 531, 630 039 054, 346, 360,

530, 531 744 163, 181, 182,

195 189, 346 219, 801 105, 163, 390 201 186 062, 491, 502 281 158, 415, 238 670 182 163, 298, 387,

463 039, 208, 309 281 074 014, 042, 054,

080, 158, 189 082, 176, 186 195 281, 622, 744

Need help? Call 1-800-763-9232

Page 31

15-1935.fm Page 31 Thursday, December 31, 1998 11:37 AM

TO OPERATE YOUR AMPLIFIER

Locate the codes for your amplifiers in “Setup Codes for Amplifiers” on Page 32 and write them in the space below. The brands are listed in alphabetical order, with the most popular codes listed first.

Codes: _____________________________________ Then follow these steps to program the 7-in-One to op-

erate your amplifier.

1. Turn on your amplifier.

2. Press

AMP

3. Hold down

4. Press

5. Repeatedly press

SETUP

until TIMED SEQ appears.

. CODE SETUP appears.

SELECT

until AMP appears.

6. Enter the first code liste d for y our amp li fie r’s brand then press

SELECT

7. Point the 7-in-One at the amplifier and press

POWER

. Your amplifier should turn off. If it does

not, enter the next code in the code li st and press

SELECT

turns off, press

then

POWER

ESC

again. When the amplifier

to stop programming.

Need help? Call 1-800-763-9232

Page 32

15-1935.fm Page 32 Thursday, December 31, 1998 11:37 AM

Setup Codes for Amplifiers

Brand Codes

Acurus

AudioSource

Carver

Curtis Mathes

Denon

Elan

Forte

GE GoldStar Harman/

Kardon

Kenwood

Linn

Luxman

Magnavox

Marantz

McIntosh

NEC

Nakamichi

Optimus

Panasonic

Philips

Pioneer

Realistic

Sansui

Shure

Sony

Soundesign

Techni cs

Wards

Yamaha

765 011 269 300 160 647 606 078 031 106

356 269 165 269 269, 321 251 264 321 013, 300, 395 308 269 013, 300 395 321 264 220 078, 211 308 013, 078, 211 133, 143, 354,

504

Need help? Call 1-800-763-9232

Page 33

15-1935.fm Page 33 Thursday, December 31, 1998 11:37 AM

TO OPERATE OTHER DEVICES

In addition to the lab eled devices (

CBL, VCR

, or

SAT

), the 7-in-One can als o op er ate lase r

AMP, TUN, TV, CD

disc players (LDP) , cassette decks, digital audio tape (DAT) players, video accessories, and miscellaneous audio devices (graphic equalizers and digital audio service terminals, for example).

To access device codes for: Use:

Digital Video Disc Players, Laser Disc Players, Cassette Decks, Digital Audio Tape Players

Phonographs Video Accessories Miscellaneous Audio Home Automation

VCR

CD CBL AMP PLUG ’N POWER

For example, to set up a laser disc player:

1. Turn on your laser disc player and insert a disc.

2. Press

3. Hold down

4. Press

5. Repeatedly press

6. Press

VCR

SETUP

until TIMED SEQ appears.

. CODE SETUP appears.

SELECT

or to toggle between VCR, LDP,

until VCR appears.

TAPE, and DAT.

7. When LDP appears, enter the first code listed for

8. Point the 7-in-One at the laser disc player and

your laser disc player’s brand i n “Setup Codes for Laser Disc Players” on Page 35, then press

SELECT

press

. Your laser disc player should play. If it

does not, enter the next code in the code list and

SELECT

press player plays, press

then PL again. When the laser disc

ESC

to stop programming.

Need help? Call 1-800-763-9232

Page 34

15-1935.fm Page 34 Thursday, December 31, 1998 11:37 AM

Setup Codes for Cassette Players

Brand Codes ADC Aiwa Akai Carver Denon Fisher Garrard

JVC

Kenwood

Kyocera MGA Magnavox Marantz Mitsubishi Nakamichi

Onkyo Optimus

Panasonic Philips Pioneer RCA Sansui Sanyo Sharp Sherwood Sony Teac

Tech nics

171 029, 197, 200 283 029, 261 076 074, 261 300, 308, 309,

439 244, 273, 274,

303 070, 071, 092,

233, 234 171 313 029 029 283, 313 147, 151, 218,

247, 248 136, 282 027, 220, 300,

337, 439 229 029 027, 099, 220 261 029 261 231 337 170, 243, 291 280, 289, 308,

309 229

Brand Codes Victor Wards Yamaha

273, 274 027 094, 097

Setup Codes for Digital Audio Tape (DAT) Players

Brand Code Carver Marantz Philips

158 158 158

Setup Codes For DVD Players

Brand Codes

JVC Kenwood Magnavox Mitsubishi Onkyo Panasonic Philips Pioneer Proscan RCA Sony Technics Tosh iba Zenith

558 534 503 521 503 490 503, 539 525 522 522 533 490 503 503

Need help? Call 1-800-763-9232

Page 35

15-1935.fm Page 35 Thursday, December 31, 1998 11:37 AM

Setup Codes for Home Automation

Brand Codes Audio Access GE LiteT ouch Lutron One For All RadioShack Sanyo Security

System Universal X10

154 240 084 318 167 240 336 167

167

Setup Codes for Laser Disc Players

Brand Codes Aiwa Carver Denon Disco Vision Funai Hitachi JVC Kenwood Magnavox

Marantz Mitsubishi NAD NEC Onkyo Panasonic Philips

203 064, 194, 323 059, 172, 241 023 203 023 558 534 194, 217, 241,

503 064, 194 059, 521 059 286 503 204, 490 064, 194, 503,

539

Brand Codes Pioneer Proscan Quasar RCA Realistic Samsung Sega Sony

Technics Theta Digital Tosh iba Yamaha Zenith

023, 059, 525 522 204 128, 522 203 323 023 193, 201, 270,

533 204, 490 194 503 217 503

Setup Codes for Miscellaneous Audio

Brand Codes Aiwa Carver Denon Disco Vision Funai Hitachi JVC Kenwood Magnavox

Marantz Mitsubishi NAD NEC Onkyo Panasonic

203 064, 194, 323 059, 172, 241 023 203 023 558 534 194, 217,

241, 503 064, 194 059, 521 059 286 503 204, 490

Need help? Call 1-800-763-9232

Page 36

15-1935.fm Page 36 Thursday, December 31, 1998 11:37 AM

Brand Codes

Philips

Pioneer Proscan Quasar RCA Realistic Samsung Sega Sony

T echnics Theta Digital Toshiba Yamaha Zenith

064, 194, 503, 539

023, 059, 525 522 204 128, 522 203 323 023 193, 201,

270, 533 204, 490 194 503 217 503

Setup Codes for Phonographs

Brand Codes Aiwa Carver Magnavox Marantz Philips

188 188 188 188 188

Need help? Call 1-800-763-9232

Page 37

15-1935.fm Page 37 Thursday, December 31, 1998 11:37 AM

SPECIAL FEATURES

SEARCHING FOR A CODE

Before Setup

If you have tried all the codes from the list and your device still will not respond to the 7-in-One (or if your brand is not listed), try searching for your code.

For example, to find the code for a TV:

1. Turn on your TV, then press

SETUP

2. Hold down

3. Press

4. Press

5. Press

6. Press

MENU SELECT MENU

SELECT

until TIMED SEQ appears.

. CODE SETUP appears.

. DEV SET UP appears.

. DEV SEARCH appears.

. TV and the last entered three-di git

code appear.

7. Press

POWER

appears. Continue pres sing

. If your TV does not tu rn off, press

. The next most recently entered code

POWER

until your TV turns off. Then p ress

then

SELECT

to lock

in the code and stop programming.

Repeat these steps, us ing the appropri ate device control button in Step 1 for each device you need to search.

If you are searching for a VCR, laser disc player,

Note:

or DVD player code, you might need to use stead of

POWER

(Play) in-

Need help? Call 1-800-763-9232

Page 38

15-1935.fm Page 38 Thursday, December 31, 1998 11:37 AM

After Setup

After you have set up yo ur devices, you migh t need to find out which code is operating one of them. For example, to find out what three-digit code is operating your TV:

1. Press

2. Hold down

3. Press

4. Press

5. Press

6. Press

SETUP

until TIMED SEQ appears.

. CODE SETUP appears.

SELECT MENU

SELECT

. DEV SET UP appears.

twice. DEV NUMBER appears.

. TV and the code for that device

appear.

To view the three-digit code for another

Note:

device, press the key for the device you want to view in Step 1.

7. Write down the three-digit code then press

ESC

stop programming.

USING THE SLEEP FUNCTION

To use the sleep timer built into your TV, cable converter, satellite system, or audio device, press

SHIFT

(

then

MUTE

). Most sleep timers advance in increments of 10 or 15 m inutes. For spec ific inst ructions on setting your devi ce’s sleep timer, refer to the device’s owner’s manual.

SLEEP

Or, if your device does not ha ve a sleep timer, follow these steps to enable Sleep Lock on the 7-in-One. Then you can use the 7-in-One’s built-in sleep timer with all devices.

1. Hold down

SETUP

until TIMED SEQ appears.

Need help? Call 1-800-763-9232

Page 39

15-1935.fm Page 39 Thursday, December 31, 1998 11:37 AM

2. Press

3. Press

4. Press

5. Press

6. Press

7. Press

Whenever you press 15 appears. To add time to the sleep timer, press

. Each press of

twice. CONFIGURE appears.

SELECT MENU SELECT MENU SELECT

. THEATER SEL appears.

twice. SLEEP LOCK appears

. DISABLE appears.

. ENABLE appears.

to stop programming.

SLEEP (SHIFT

adds 15 minute s to the sleep

then

MUTE

), SLEEP

timer, up to a total of 60 minutes. When the desired sleep time appears, press

SELECT

. SLEEP appears.

When Sleep Lock is enabled, the 7-in-One activates its own Sleep Timer. To use ano ther devi ce’s s leep ti mer, or to simply disable Sleep Lock, repeat the above steps, pressing

to select DISABLE in Step 6.

CONVERTING DEVICE KEYS

You can use the 7-in-O ne to operate a second TV or VCR, or any combinat ion of up to six devices. To do this, you must first convert an unused device key (

TUN, TV, CD, CBL, VCR

, or

SAT

) to operate t he se cond

device.

AMP

For example, to convert

1. Hold down

2. Press

3. Press

4. Press

5. Press

6. Press

CBL

to operate a second TV:

SETUP

until TIMED SEQ appears.

twice. CONFIGURE appears.

SELECT MENU SELECT TV

. THEATR SEL appears.

three times. MODE MAP appears.

. SOURCE appears.

. COPY TO appears.

Need help? Call 1-800-763-9232

Page 40

15-1935.fm Page 40 Thursday, December 31, 1998 11:37 AM

7. Press

8. Program the co nverted device key (

CBL

. TV2 appears.

CBL

) with the code for the second TV. (See “To Operate Your TV” on Page 12.)

Repeat these steps for each key you want to convert.

VOLUME LOCK

The 7-in-One lets you cho ose one d ev ice to c ontrol the sound volume for all the devices the 7-in-One operates. When you first set up the 7-in-One , each dev ice with a volume control operates its own volume. You can change this so that on e device controls the volume no matter which device the 7-in-One is operating.

For example, to set-up the 7-in-One so your receiver always controls the volume:

1. Hold down

2. Press

3. Press

4. Press

5. Press

SETUP MENU SELECT MENU SELECT

until TIMED SEQ appears.

twice. CONFIGURE appears.

. THEATR SEL appears.

twice. VOL LOCK appears.

. UNLOCK appears.

6. Press

7. Press want to control the sound volume (

CD, CBL, VCR

For example, to control the volume through your receiver, press the volume keys on your 7-in-One, your receiver controls the volume.

8. Press

. LOCK appears.

SELECT

ESC

then the key for th e device th at you

SAT

, or

TUN

then

), then press

SELECT

to exit.

Need help? Call 1-800-763-9232

AMP, TUN, TV

SELECT

. When you press

Page 41

15-1935.fm Page 41 Thursday, December 31, 1998 11:37 AM

You might need to use the

Note:

VOL

keys to control volume, de pen din g on which device you s ele cted during these steps.

Resetting Volume Lock

To restore volume control to each individual device:

1. Hold down

2. Press

3. Press

4. Press

5. Press

6. Press

7. Press

SETUP

until TIMED SEQ appears.

twice. CONFIGURE appears.

SELECT MENU SELECT MENU

SELECT

. THEATR SEL appears.

twice. VOL LOCK appears.

. LOCK appears.

. UNLOCK appears.

. Each device now controls its own volume when yo u use the volume k eys on your 7in-One.

USING THE MACRO KEYS

The 7-in-One has two macro keys,

AUD

key lets you play back a series of up to 15 keystrokes at any time with the press of a sing le key, in any mode. You can set up a maximum of 36 macros, 15 timed sequences (see “Setting Up Timed Sequences” on Page 42), or a combination of both.

and

VID

. Each

For example, follow these steps to set up a macro on

VID

you can record a program.

Note:

at Step 1.

1. Hold down

that turns on your TV, VCR, and satellite system so

If you make a mistak e, press

SETUP

. TIMED SEQ appears.

Need help? Call 1-800-763-9232

ESC

and start ove r

Page 42

15-1935.fm Page 42 Thursday, December 31, 1998 11:37 AM

2. Press

3. Press

4. Press

5. Press

6. Press

MENU SELECT MENU SELECT VID

twice. CONFIGURE appears.

. THEATR SEL appears.

four times. KEY MACRO appears.

. SEL MACKEY appears.

. SELECT SEQ appears.

7. Enter the sequence of up to 15 keystrokes that you

VID

ESC

, the TV

want the 7-in-One to memorize, then press For example:

TV POWER 0 4 TV VCR SAT POWER

In our example, whenever you press turns on, tunes to cha nnel 4, and ch ange s its in put to VIDEO 1, then the satellite turns on.

When setting up a macro, you m ust include

Note:

all keystrokes that you would enter during r egular usage, such as pressing

ENTER

after a channel number when changing channels (if your TV requires it).

Repeat these steps to set up a macro on the other macro key.

SETTING UP TIMED SEQUENCES

The 7-in-One lets you set up a sequence of keys trokes that can be played back at a time you specify, up to seven days in advance. You can set up a maxim um of 15 timed sequences, 36 macros (see “Using the Macro Keys” on Page 41), or a combination of both.

For example, follow these steps to set your VCR to record a program from your satellite system.

Note:

at Step 1.

1. Hold down

If you make a mistake, press

SETUP

Need help? Call 1-800-763-9232

until TIMED SEQ appears.

ESC

and start over

Page 43

15-1935.fm Page 43 Thursday, December 31, 1998 11:37 AM

2. Repeatedly press

SELECT

until START and the time appear, with the first digit bl inking. Enter the time in 12-hour format. AM/PM flashes.

3. If necessary, press and PM, then press

4. Press

to toggle between AM

SELECT

. ONCE appears.

or to toggle between ONCE, DAILY, and WEEKLY. When the desired freque ncy appears, press

SELECT

. The day of the week dis-

play appears.

5. Use

and to toggle through the days of the week until the day when you want the sequence to start running appears.

6. Press

SELECT

. ENTER SEQ appears.

7. Enter the sequence of keyst rokes you want the 7in-One to play at the selected time, then press

ESC

For example, to set up a sequence that turns on the satellite, tunes to channel 275, turns on the VCR, and starts recording, enter:

SAT POWER SAT 2 7 5 VCR POWER VCR RECORD

When your sequence is set up, the clock icon appears.

Deleting a Timed Sequence

1. Hold down

2. Press

3. Press

4. Press

5. If necessary, use

SETUP

until TIMED SEQ appears.

SELECT MENU SELECT

. ADD MACRO appears.

or . DEL MACRO appears.

. DEL and the first set day and time

appear.

or to scroll through the saved timed sequences. When you see the one you want to del ete, press

Need help? Call 1-800-763-9232

SELECT

. DELETED

Page 44

15-1935.fm Page 44 Thursday, December 31, 1998 11:37 AM

appears. If there are more timed sequences, the next one appears.

SETTING UP THE HOME THEATER KEY

The 7-In-One lets you operate all of the most commonly used home theater functions in one mode. When setting up the Home Theater mode, you choose which devices will control volume, channel changing, playback, picture-in-picture, and menu functions.

1. Press

2. Hold down

3. Press

4. Press

5. Press

HOME THEA TER

SETUP MENU SELECT SELECT

CBL, SAT, VCR

until TIMED SEQ appears.

twice. CONFIGURE appears. twice. AUDIO appears. then the appropriate device key (TV,

AUX

, or

) to select the device that you want to control audio features in Home Theater mode, then press

6. Press

SELECT

. CHANNEL appears.

, then the appropriate device key to select the device that you want to change channels in Home Theater mode. Then press

SELECT

PLAYBACK appears.

7. Press

SELECT

, then CD or

VCR

to select the device

that you want to control the transp ort keys (

REW, FF, PAUSE, STOP

mode. Then press

SELECT

REC

and

) in Home Theater

again. PIP (Picture-in-

Picture) appears.

8. Press

SELECT

then TV,

CBL

, or

VCR

to select the device that you want to control Picture-in-Picture features in Home Theater mode. Then press

SELECT

again. MENU appears.

again.

PLAY

Need help? Call 1-800-763-9232

Page 45

15-1935.fm Page 45 Thursday, December 31, 1998 11:37 AM

9. Press

SELECT

then the appropriate key to select the device you want to control the menu features in Home Theater mode. Then press

SELECT

stop programming.

Setting Up a Power Key Macro

After you set up the ate a macro sequence that lets you use on and off all of your Home Theater devices.

1. Press

HOME THEATER

TIMED SEQ appears.

2. Press

3. Press

MENU SELECT

4. Repeatedly press appears.

5. Press

6. Press

SELECT POWER

home theater system.

You cannot use

Note:

Theater Power key macro.

HOME THEA TER

, then hold down

mode, you can cre-

POWER

SETUP

twice. CONFIGURE appears.

. THEATR SEL appears.

MENU–

until KEY MACRO

. SEL MACKEY appears. then the key for each devi ce in you r

AUD

VID

in your Home

again to

to turn

until

7. Press

POWER

then

ESC

to stop programming.

To activate the Home Theater Power macro, press

HOME THEATER POWER

to turn all o f your home th eater devices on or

so THEATER appears, then press

off.

CLEAR ALL

Use the Clear All feature to reset all advanced functions of the 7-in-One. Clear All erases macro sequences, timed macro sequences , and Vol ume Lock fr om the 7-

Need help? Call 1-800-763-9232

Page 46

15-1935.fm Page 46 Thursday, December 31, 1998 11:37 AM

in-One’s memory. It does

erase the setup codes you

not

programmed. To reset the 7-in-One using the Clear All feature:

1. Hold down

2. Press

3. Press

4. Press

5. Press

6. Press

7. Press

SETUP

. TIMED SEQ appears.

twice. CONFIGURE appears.

SELECT MENU SELECT SELECT SELECT

. THEATER SEL appears.

. CLR ALL appears.

again. CONFIRM appears. once more. Your 7-in-One is reset.

USING THE IR/RF COMMAND CENTER

The 7-in-One comes with an IR/R F Command Center which receives radio frequency (RF) signals from the 7in-One and conver ts them into infrared (IR) sign als to control your components.

The 7-in-One’s actual range depends on the con-

Note:

struction of the building where it is used, as well as other factors, such as rad io frequency interference. For the best operation:

• Aim the 7-in-One toward the room where the Command Center is located.

• Do not position the Command Center near metal objects (such as heating ducts) that can absorb RF signals.

• Keep fresh batteries in the 7-in-One. Weak batteries reduce the 7-in-One’s range.

Need help? Call 1-800-763-9232

Page 47

15-1935.fm Page 47 Thursday, December 31, 1998 11:37 AM

After you have set up the 7-in-One to control your devices (see “Quick Setup” on Page 6 or “Setting Up the Remote” on Page 12), follow these steps to set up the Command Center:

1. Choos e a location about 8 fee t in front of the com ponents you want to control. The location should be near an easily accessible standard AC outlet, with line-of-sight access to your components.

2. Plug the Command Center’s power cord into the AC outlet and raise its telescoping antenna.

3. Position the Command Center so its black IR lens is facing your components.

4. Be sure the remote is not pointing toward your equipment, then test the Command Center by pressing

POWER

. You should be able to control

components from any room.

Using the IR Signal Extension Cord

You can use the s upplied IR signal extensio n cord to control a device that is within 4 feet of the Command Center but out of its direct line of sight.

1. Plug the IR signal extension cord into the jack (shown here) on the back of the Command Center.

2. Route the IR signal extension cord to the device.

Need help? Call 1-800-763-9232

Page 48

15-1935.fm Page 48 Thursday, December 31, 1998 11:37 AM

3. Use the supplied double-sided tape to attach the IR signal extension cord to the device, with its LED on or next to the device’s IR sensor.

4. Be sure the remote is not pointing toward your equipment, then test the Command Center by pressing

POWER

. The Command Center co nverts the 7-in-One’s RF signal into an IR signal, and transmits that signal to the device through the cord.

Need help? Call 1-800-763-9232

Page 49

15-1935.fm Page 49 Thursday, December 31, 1998 11:37 AM

TROUBLESHOOTING

Problem Solution

Display begins to fade, does not appear, or the red light blinks five times when you press a key.

The 7-in-One does not operate your device.

The 7-in-O ne is not performing commands properly.

You make a mistake when setting up your 7-inOne.

VCR not recording. As a safety feature on the 7-in-

CH+/–

(Channel Up/ Down) and working for your RCA TV.

LAST

not

Replace the batteries with four fresh AAA alkaline batteries.

Try all of the codes listed for your brand of device in the “Setup Codes” section. If this does not work, try searching for your code (see “Searching for a Code” on Page 37). Make sure the device you ar e setting up can be operated with an infrared remote.

Try all of the codes listed for your brand of device in the “Setup Codes” section. Many set-up codes may allow some degree of operation. However, only one set-up code will work correctly with your device.

During any set up procedure, except for timed s equ enc es , the

ESC

key will return you to the DEVICE and the TIME screen without saving any of the entered informatio n. If you mak e a mistake when setting up a timed sequence, return to the timed sequence menu and delete the incorrect sequence.

One, you must press the key twice to begin recording.

Due to RCA design (1983-

1987), only the original remote will operate these functions.

REC

Need help? Call 1-800-763-9232

Page 50

15-1935.fm Page 50 Thursday, December 31, 1998 11:37 AM

Problem Solution

Problems changing channels.

If your original remote required an ENTER keystroke when changing channels, press the ENTER key on the 7-in -One after you enter the channel nu mber.

The red light blinks when you press a key but you receive no respons e from your device.

Press the appropriate device

MAN, TUN, TV, CBL, CD

key (

VCR, SAT, PLUG ’N POWER

for the device you are trying to operate. Make sure you aim your 7-inOne at your devic e and that you are within 15 feet of the device before using your remote.

You can turn your audio component on and off and control its volume, but you cannot change preset channels.

Your satellite receiver does not respond to the codes listed in the manual.

Some audio components might need both a Tuner/Receiver code (see Page 29) and an Audio Amplifier code (see Page

32) to control all the features of your audio component.

The codes lis ted in this manual are set up to operate your satellite receiver on the 1st or 2nd addresses only. Make sure the satellite receiver you are setting up can be operated with an infrared remote.

The 7-in-One does not operate Bang & Olufsen audio equipment.

Some Bang & Olufsen and other manufacturers’ equipment operates at frequencies higher than 100 kHz. The 7-in-One will not operate such devices.

)

Need help? Call 1-800-763-9232

Page 51

15-1935.fm Page 51 Thursday, December 31, 1998 11:37 AM

NOTES

Need help? Call 1-800-763-9232

Page 52

15-1935.fm Page 52 Thursday, December 31, 1998 11:37 AM

Limited Ninety-Day Warranty

This product is warranted by RadioShack against manufacturin g defects in material and workma nship under normal use fo r ninety (90) days from the date of purchase from R adioShack company-owned stores and autho rized RadioShack franchisees and dealers. EXCEPT AS PROVIDED HEREIN, RadioShack MAKES NO EXPRESS WARRANTIES AND ANY IMPLIED WARRANTIES, INCLUDING THOSE OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO THE DURATION OF THE WRITTEN LIMITED WARRANTIES CONTAINED HEREIN. EXCEPT AS PROVIDED HEREIN, RadioShack SHALL HAVE NO LIABILITY OR RESPONSIBILITY TO CUSTOMER OR ANY OTHER PERSON OR ENTITY WITH RESPECT TO ANY LIABILITY, LOSS OR DAMAGE CAUSED DIRECTLY OR INDIRECTLY BY USE OR PERFORMANCE OF THE PRODUCT OR ARISING OUT OF ANY BREACH OF THIS WARRANTY, I NCLUDING, BUT NOT LI MITED TO, ANY DAMAGES RESULTING FROM INCONVENIENCE, LOSS OF TIME, DATA, PROPERTY, REVENUE, OR PROFIT OR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, EVEN IF RadioShack HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Some states do not allow the limitations on how long an implied warranty lasts or the exclusion of inci den tal or co nseque ntial da mages, so the abo ve limi tations or exclusions may not apply to you. In the event of a product defect during the warranty period, take the product and the RadioShack sales receipt as proof of purchase date to any RadioShack store. Ra dioShack will, at it s option, unless other wise provided by law: (a) correct the defect by product repair without charge for parts and labor; (b) replace the product with o ne of the sam e or simi lar design; or (c) refund the purchase price. All replaced parts and p roducts, and products on which a refund is made, become the property of RadioShack. New or reconditioned parts and products ma y be used in the performance of war ranty service. Repaired or replaced parts and products are warranted for the remainder of the original warranty period. You will be charged for repair or replacement of the product made after the expiration of the warranty period. This warranty does not cove r: (a) d amage or failure caused by o r attribu table to acts of God, abuse, accid ent, misu se, impr oper or abnor mal usage, fa ilure to follow instructions, improper installation or maintenance, alteration, lightning or other i nc id e nc e of ex c e ss vo lt ag e or cu r re n t; ( b) an y re pai r s othe r th a n those provided by a RadioShack Authorized Service Facility; (c) consumables such as fuses or batter ies; (d) cosm etic damag e; (e) tra nsportation , shipping or insurance costs; or (f) co sts o f p rod uct removal, installation, se t-u p service adjustment or reinstallation. This warranty gives you sp ecific legal rights, and you m ay also have other rights which vary from state to state.

RadioShack Customer Relations, Dept. W, 100 Throckmorton St., Suite 600,

Fort Worth, TX 76102

We Service What We Sell

3/97

11A98N Printed in Hong Kong

Radio Shack 7-in-One Home Theater, 15-1935 Owner's Manual

Specifications and Main Features

Frequently Asked Questions

User Manual