Soldering
Starter Kit
6400245 User’s Guide
We hope you enjoy your Soldering Starter kit from RadioShack. Please read
this user’s guide before using your new soldering kit.
2
Soldering
Soldering Iron and Holder
Compact design soldering iron with heatdissipating holder securely holds the soldering
iron at a convenient angle.
Spare Soldering
Tips (4)
Rosin Core
Solder
Desoldering
Desoldering
Vacuum Pump
2mm
Solder
Wick
To ol s
Helping Hands with
Magnifying Glass
Magnifi es small
objects and holds
them securely.
4.5” Mini
Diagonal
Pliers
Reamer Tool
Fork Tool
Chip Tool
Hook Needle Tool
Knife/Scraping
To ol
Stainless-Steel
Brass Brush Tool
User’s
Guide
User’s
Guide
Caution: The solder contained in this kit contains lead. Thoroughly wash your hands
after soldering and before consuming food.
3
Important Safety Instructions
• Read instructions before operating the product.
• Keep out of the reach of children.
• Work only in a dry area, away from fl ammable materials.
• Operate the soldering iron in properly ventilated rooms or rooms with a fume
extraction system. Inhalation of soldering fumes and particles from fl ux in the
solder is detrimental to health.
• Be careful! Hot soldering irons can cause severe burns and ignite fi res. Do not
touch the tip and the heat sink plate or let it come in contact with any other
material.
• Do not attempt to touch the tip of a hot soldering iron or remove solder from its
surface with your hands.
• If the supplied cable is damaged, it should be repaired by the manufacturer or its
agent or a suitable qualifi ed person in order to avoid a hazard.
• Never hold the soldering tip to the soldering point too long. This can destroy the
soldering point.
• Never operate the soldering iron without the soldering tip. This can damage the
heating device.
• When you are not using your soldering iron, be sure to turn it OFF.
• Store the soldering iron in a dry, secure place where children cannot reach it.
• Keep the soldering iron away from dust and dirt, and clean it with a damp cloth
occasionally to keep it looking new.
• This product, when used for soldering and similar applications, produces chemicals
known to the State of California to cause cancer and birth defects (or other
reproductive harm).
Specifi cations
Output Power ................................................................................................................................ 48W
Input Voltage .................................................................................................120V AC, 60Hz, 0.5A
Temperature Control ................................................................................... Up to 842°F (450°C)
Soldering Tips ..............................................................................................Copper, nickel-plated
Cord Length .....................................................................................................................3.6 ft (1.1m)
Specifi cations are subject to change and improvement without notice. Actual
product may vary from the images found in this document.
Loading...