Radio Shack 6301469 User Manual

Page 1
TM
2 3 4 5 6 7
We hope you enjoy your Wireles s Weather Station from RadioSha ck. This weather station features a cloc k with alarm func tion, and minimum and ma ximum indoor/outdoor temperature display. It wor ks with up to three sensors (additional s ensors not include d). Please read this user’s guide be fore using your new weather station.
Package Contents
• Weather Station
• Thermo Sensor
• User’s Guide
Specifications
Indoor Temperature Range ... 32–122°F (0–50 °C)
Outdoor Temperature Range ....................................
.................................................. -4 – 140°F (-20–60°C)
Sensor RF Frequency ..................................433 MHz
RF Operation Range ...............................98 f t (30 m)
Channel Number .........................................................3
Specications are subject to change and improvement without notice. Actual product may vary from the
images found in this document.
Wireless Weather Station
6301469
User’s Guide
Set Weather Station and Sensor
1. Place the weather sta tion and sensor close
together indoors to com municate.
2. Slide the sensor’s CH 1 2 3 switch to select a chann el, and press the weather station’s CH + button to select the same cha nnel. If you are using more than one sensor (up to three), select
a dierent channel for eac h
sensor.
high enough where it i s out of reach for children. The senso r should be mounted
onto a vertical at su rface. Avoid locat ion
where rain and water fa lls directly onto th e sensor.
Install Batteries
1. Insert two AA bat teries (not includ ed) into
the weather stati on and thermo senso r
respectively, matchin g the polarity sy mbols
(+ and –) marked inside each bat tery compartment.
2. Press RESET on both unit s.
Battery Note:
• Dispose of old batterie s promptly and properly. Do not burn or bu ry them.
• Use only a fresh batter y of the required size and type.
• Use alkaline batter ies for longer usag e, or use lithium batter ies in temperatures b elow
-4°F (-20°C).
• Do not mix old and new bat teries, or
batteries of dierent t ypes, capaciti es, or
chemistries.
Weather Station
Thermo Sensor
AA
AA
AA
AA
RESET
CH 1 2 3
SNOOZE / LIGHT
• Silence the alar m for 5 minutes when the alarm sounds.
• Turn the backlight on.
ALARM SET
Enter and conrm alarm
settings.
• View the set alarm time.
• Activate the alarm.
CH +
• Set the hour and minute.
• Select a sensor.
MEM –
• Set the hour and minute.
• View maximum (MAX), minimu m (MIN) or current indoor/outdoor temperature.
DISPLAY SET
Enter and conrm
clock settings .
°C/°F
Change between Celsius and Fahrenhe it.
SENSOR
Scan sensor signa l.
RESET
Clear all indoor/outdo or temperature data , and clock and alar m settings.
Important Installation and Location Notes
• During initial i nstallation , the sensor may take up to an hour or more to accl imate to current conditions.
• Place the weather sta tion indoors away f rom
vents, heating or coo ling elements , and
direct sunlight.
• Stand the sensor on
a at surface indoo rs
or outdoors away from direct sunligh t and moisture. Or use a screw (not included) to mount it on a wall. Make sure the sensor is with in 98 feet (30m) of the weather stati on, without obst ructions between them. To avoid inter ference, place the weather stati on and sensor away from
other electronic d evices.
If the sensor is placed ou tdoors, mount it high enough o the g round where water,
snow, and rain cannot accu mulate and also
• If you do not plan to use your weat her
station for more than a m onth, remove the
batteries. Batter ies can leak chemi cals that can damage elect ronic parts.
3.
Press the weather station’s SENSOR button to scan sensor signal. Scannin g may take some time.
Note: If the weather station does not conne ct to the sensor, relocate the sensor and/or the weather station un til connection is esta blished.
6301469_PM_EN_081115.indd 1-7 8/11/2015 3:57:34 PM
Page 2
8 9 10 11 12 13 14
Set the Time
1. Press and hold DISPL AY SET until the digit s 12 or 24 (time format) ash.
2. Press CH+ or MEM– to sele ct a time
format. Press DISPLAY SET to con rm and go to the next setting .
• The setting order is 12/24 hour fo rmat, hour, minute, and second.
• When you select the 12-hour for mat,
AM or PM displays.
Set the Alarm
1. Press and hold ALAR M SET until the alar m
hour digits ash .
2. Press CH+ and MEM– to set t he hour. Press ALARM SET to conr m and go to the minute setting.
3. Press CH+ and MEM– to set t he minute and press ALARM SET to con rm.
Note: After setting t he alarm, press AL ARM SET
again to activate th e alarm.
M displays.
Printed in China
09A15
6301469
Limited Warranty
General Wireless Operations Inc., doing business as RadioShack (hereafter “RadioShack”) warrants this product against defects in materials and workmanship under normal use by the original purchaser for ninety (90) days after the date of purchase from a RadioShack­owned store or an authorized RadioShack franchisee or dealer. RADIOSHACK MAKES NO OTHER EXPRESS WARRANTIES.
This warranty does not cover: (a) damage or failure
caused by or attributable to abuse, misuse, failure to follow instructions, improper installation or maintenance, alteration, accident, Acts of God (such
as oods or lightning), or excess voltage or current; (b)
improper or incorrectly performed repairs by persons
who are not a RadioShack-authorized service facility; (c) consumables such as fuses or batteries; (d) ordinary wear and tear or cosmetic damage; (e) transportation, shipping or insurance costs; (f) costs of product removal, installation, set-up service, adjustment or reinstallation;
and (g) claims by persons other than the original purchaser.
Should a problem occur that is covered by this warranty,
take the product and the RadioShack sales receipt as proof of purchase date to any RadioShack store in the U.S. RadioShack will, at its option, unless otherwise
provided by law (a) replace the product with the same or
a comparable product, or (b) refund the purchase price.
All replaced products, and products on which a refund is made, become the property of RadioShack.
RADIOSHACK EXPRESSLY DISCLAIMS ALL WARRANTIES AND CONDITIONS NOT STATED IN THIS LIMITED WARRANTY. ANY IMPLIED WARRANTIES THAT MAY BE IMPOSED BY LAW, INCLUDING THE IMPLIED WARRANTY OF MERCHANTABILITY AND, IF APPLICABLE, THE IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, SHALL EXPIRE ON THE EXPIRATION OF THE STATED WARRANTY PERIOD.
EXCEPT AS DESCRIBED ABOVE, RADIOSHACK SHALL HAVE NO LIABILITY OR RESPONSIBILITY TO THE PURCHASER OF THE PRODUCT OR ANY OTHER PERSON OR ENTITY WITH RESPECT TO ANY LIABILITY, LOSS OR DAMAGE CAUSED DIRECTLY OR INDIRECTLY BY USE OR PERFORMANCE OF THE PRODUCT OR ARISING OUT OF ANY BREACH OF THIS WARRANTY, INCLUDING, BUT NOT LIMITED TO, ANY DAMAGES RESULTING FROM INCONVENIENCE AND ANY LOSS OF TIME, DATA, PROPERTY, REVENUE, OR PROFIT AND ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, EVEN IF RADIOSHACK HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of
incidental or consequential damages, so the above
limitations or exclusions may not apply to you. This
warranty gives you specic legal rights, and you may also have other rights which vary from state to state.
Contact General Wireless Operations Inc. at:
RadioShack Customer Relations 300 RadioShack Circle Fort Worth, TX 76102 07/15
www.radioshack.com
FCC Information
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment o and on, the user is
encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
Note:
• For temperatures from -2°C to 3°C (28°F–37°F), the ice ale rt icon (
) appears
on the display.
• If the weather stat ion malfunct ions, reset it by pressing the RESET b utton, change the batteries or wai t for more moderate temperatures to resume.
Outdoor Temperature
(Current,
MAX, MIN)
Sensor Channel Indicator
Indoor Temperature
(Current, MAX, and MIN)
Clock or Alarm
Alarm Icon
Weather Station Display
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV
technician for help.
If you cannot eliminate the interference, the FCC requires that you stop using your product. Changes
or modications not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Product Wireless Weather Station Model 6301469
Responsible Party
General Wireless Operations Inc. 300 RadioShack Circle, Fort Worth, TX 76102
Phone 817-415-3200
Complies with t he European Uni on’s “Restrictio n of Hazardous Subs tances
Directive,” which p rotects the environment by rest ricting spe cic
hazardous material s and product s.
© 2015 General Wireless O perations I nc.
All rights reser ved. RadioS hack is a
registered trade mark used by General Wireles s Operations I nc.
6301469_PM_EN_081115.indd 8-14 8/11/2015 3:57:35 PM
Loading...