Owner’s Manual
Please read before using this equipment.
5-In-One Learning
Light-Up Remote
2
Contents
ˆ
Contents
Features .................................................................... 4
A Quick Look at the Keys ........................................ 5
Preparation ............................................................... 8
Installing Batteries .................................................. 8
Device Types ..... ... .................................. ... ............ 9
Setting Up Your Remote ........................................ 9
Programming Favorite Channel Scan .................. 10
Resetting Scan .................. ............................... 11
Programming Macros ........................................... 12
Programming the Power Key ............................... 13
Resetting the Power Key ................................. 13
Reassigning Devices ........................................... 13
Resetting Reassigned Device Keys ................ 14
Programming Learning ........................................ 14
Learning Functions .......................................... 15
Deleting a Learned Function ........................... 15
Operation ................................................................ 16
Using the Remote ................................................ 16
Using the Light ..................................................... 17
Using Channel Scan ............................................ 17
Using Favorite Channel Scan .............................. 17
Using Macros ....................................................... 17
Using the Power Key ........................................... 17
Changing Volume Lock ........................................ 18
Volume Unlock on a Cable Convertor
or SAT/DSS Receiver ...................................... 18
Volume Unlock on a VCR ................................ 18
Volume Unlock on a DVD ................................ 19
Volume Unlock on an Auxiliary Device ............ 19
Resetting Volume Lock to the Original
Settings ............................................................ 19
Using the Sleep Timer .......................................... 19
Setting the Sleep Timer ................................... 19
Locking/Unlocking the Sleep Timer ................. 20
Using Manual Code Search ................................. 20
Checking Your Code ........................................ 21
Troubleshooting ..................................................... 22
Care ..................................................................... 22
©
2001 RadioShack Corporation.
All Rights Reserved.
RadioShack and RadioShack.com are
trademarks used by RadioShack Corporation.
3
Contents
Manufacturers’ Codes ............................................ 23
Amplifier Codes ................................................ 23
Cable Codes .................................................... 24
Home Automation Codes ................................. 25
Laser Disc Codes ............................................. 26
Video Codes ..................................................... 26
Receiver Codes ............................................... 26
Satellite Codes ................................................. 28
Television Codes .............................................. 29
VCR Codes ...................................................... 33
DVD Player Codes ........................................... 37
TV-VCR Combo Codes .................................... 38
Specifications ......................................................... 39
4
Features
ˆ
Features
Your Radio Shack 5-In-One Learning Light-Up Remote
allows you to control your TV, VCR, cable/SAT/DSS
converter, DVD player, and an auxiliary device with one
easy-to-use remote control.
Its features include:
Learning
— stores and recalls additional remote control
functions
Sleep Timer
— lets you program your TV or cable/satel-
lite system to turn itself off
Extensive Searchable Code Library
— contains remote control codes for most available brands, including
discontinued devices
Channel Scan
— lets you “channel surf” all available
channels
Favorite Channel Scan
— lets you select only your fa-
vorite channels to “surf”
Programmable Power Key
— controls master on/off of
home entertainment devices with a single key press
Programmable Macro Keys
— allow instant tuning to
favorite channels
Mode Reassignment
— lets you add control of another
TV, VCR, DVD player or other auxiliary device in pla ce
of an existing device
Powerful Infrared Beam
— lets you operate your home
entertainment devices from a greater distance than with
many of the original remote controls
Illuminated Keypad
— provides easy-to-read remote
control operation in low light
Non-Volatile Memory
— retains stored device codes
and any programmed settings when batteries are low or
must be replaced
5
A Quick Look at the Keys
ˆ
A Quick Look at the
Keys
Your Radio Shack 5-In-One Learning Light-Up Remote
controls the most-used functions on your TV, VCR, cable/SAT/DSS converter, DVD player, and an auxiliary
device.
After you set up the remote control, its command keys
will work like the keys on your original remote controls.
For example, depending on the device you se lect (TV,
VCR, CBL/SAT, DVD, or AUX)
POWER
will operate just
like the POWER ON/OFF key on the remote control for
your original TV, VCR, cable/SAT/DSS, DVD player, or
auxiliary device.
The following table lists all keys and how they function.
Key Function
P
Use to program the remote control. The P key is slightly
recessed to avoid accidental programming changes. You might
need to use a pointed device,
such as a ballpoint pen, to apply
sufficient pressure.
Light Key Use to turn the backlight on or
off. When on, any key press activates the backlight. It stays on
for up to 5 seconds after the last
key press.
TV, VCR, CBL/SAT
, and
DVD
Use to set up the remote control
to replace the devices’ original
remote controls. In normal operation, use to remotely select a
desired device to control.
POWER, VOL +, VOL –
,
CH +, CH–, LAST
,
MUTE, ENTER
,
Digit Keys, Transport
Keys,
+100
, and
TV/VCR (A/B
)
Use the same as the corresponding keys on the original
remote controls.
POWER
can
also be programmed for ALL
POWER on/off of selected
devices (see “Programming the
Power Key” on Page 13).
6
A Quick Look at the Keys
The following table explains how selected keys function
in different modes. For example,
CH+
acts as a ChannelUp key in TV, VCR, and CBL/SAT modes. However, in
DVD mode,
CH+
acts as a Skip Forward key.
MENU, GUIDE, INFO
,
and
EXIT
Use to view interactive menus
for TV,
VCR, CBL/SAT
, and
DVD
.
MUSIC, MOVIES
,
SPORTS
, and
NEWS
Use to program instant tuning of
up to three channels per category (see “Programming Macros” on Page 12).
SCAN (FAV
) Use to scan all or only favorite
channels (see “Using Channel
Scan” on Page 17 and “Using
Favorite Channel Scan” on
Page 17).
Key TV VCR
CBL/
SAT
DVD AUX
GUIDE
Guide Program Guide Setup
Menu
Guide
MENU
Menu Menu Menu DVD
Menu
Program
INFO
Display Display Informa-
tion
Display Display
CH+
Channel UpChannel UpChannel UpSkip
Forward
Preset +
CH–
Channel
Down
Channel
Down
Channel
Down
Skip
Reverse
Preset –
LAST
Last
Channel
Last
Channel
Last
Channel
Return Random
TV/
VCR
TV/VCR TV/VCR A/B TV/DVD Input
REW
Punch
through
to VCR
Rewind Rewind
VCR/
Page
Down
*
Rewind Rewind
PLAY
Punch
through
to VCR
Play Play
VCR
Play Play
Key Function
7
A Quick Look at the Keys
*
On some cable/satellite remote controls,
REW
and
FF
do not punch through to VCR transport control. Instead,
these keys act as Page Up and Page Down, respectively.
FF
Punch
through
to VCR
Fast
Forward
Fast
Forward
VCR/
Page
Up
*
Fast
Forward
Fast
Forward
REC
Punch
through
to VCR
Record Record
VCR
Record Record
STOP
Punch
through
to VCR
Stop Stop
VCR
Stop Stop
PAUSE
Punch
through
to VCR
Pause Pause
VCR
Pause Pause
Key TV VCR
CBL/
SAT
DVD AUX
8
Preparation
ˆ
Preparation
After installing the batteries (not included), you can immediately use the remote (with its factory-programmed
settings) to control an RCA TV, VCR, and DIRECTV receiver, as well as a Pioneer DVD player and auxiliary device. To control other brands, you must perform some
simple programming to overwrite the default parameters.
For best results, read and perform all remaining instructions. Also, keep these instructions for future reference.
If you experience any difficulties programming your remote, call customer service at 888-631-9859.
INSTALLING BATTERIES
Your remote requires four AAA batteries (not supplied)
for power. For the best performance and longest life, we
recommend RadioShack alkaline batteries.
Cautions:
• Use only fresh batteries of the required size and
recommended type.
• Do not use rechargeable batteries.
• Do not mix old and new batteries or different types
of batteries (standard or alkaline).
• Always remove old or weak batteries. Batteries can
leak chemicals that can destroy electronic parts.
Note:
Do not press any of the remote control’s keys
while installing batteries.
Follow these steps to install batteries.
1. Press the battery compartment cover’s tab and lift
off the cover.
2. Place the batteries in the compartment as i ndicated
by the polarity symbols (+ and –) marked inside.
3. Replace the cover.
9
Preparation
When batteries become low, the remote control stops
operating to protect stored settings. Replacing the batteries with new ones restores full functionality and does
not require you to reprogram your remote control.
Warning:
Dispose of old batteries promptly and proper-
ly. Do not burn or bury them.
Caution:
If you do not plan to use the remote for a
month or longer, remove the batteries. Batteries can
leak chemicals that can destroy electronic parts.
DEVICE TYPES
You can use the remote control’s device keys to control
the following types of devices:
TV
— TV
VCR
— VCR or PVR (Personal Video Recorder)
CBL/SAT
— Cable converter or SAT/DSS receiver
DVD
— DVD or LD Player
AUX
— Amplifier, tuner or other audio device
SETTING UP YOUR REMOTE
To control devices other than the default brands (for example, an RCA TV, VCR, and DIRECTV receiver, a Pioneer DVD player and auxiliary device), perform the
following steps. If you use the default brand devices,
skip this section.
1. Refer to “Manufacturers’ Codes” on Page 23 and
write down the code(s) for the brand of each devi ce
you want to program on the supplied label.
Note:
Some manufacturers may have several
codes listed. Try each until you find the right one. If
you cannot find the correct code, see “Using Manual
Code Search” on Page 20.
2. Turn on all your home entertainment devices.
10
Preparation
3. On the remote control, press the desired device key
(TV,
VCR, CBL/SAT, DVD
, or
AUX
).
Note:
For TV/VCR combinations, press
VCR
and
use the VCR code listed for your model under “TVVCR Combo Codes” on Page 38. If your TV/VCR
combination also lists a TV code, you must program
the TV separately by repeating Steps 3–5 to add
volume control. In Step 3, press
TV
, then in step 4
enter the TV code.
4. Hold down
P
until the remote’s red light blinks twice,
then release P and enter the first 4-digit manufacturer’s code for the desired device. When the red
light blinks twice, the remote control has accepted
the code.
For example, to set up the remote control of a Panasonic TV (manufacturer’s code 0051), press
TV
,
hold down P until the red light blinks twice, release
P
and press
0 0 5 1
.
Note:
If you entered the code incorrectly, the red
light emits one long blink.
5. Point the remote control at the desired device and
press
POWER
. The device should turn off.
If the remote control does not operate your device,
try the other codes listed in “Manufacturers’ Codes”
for your type and brand of device. Otherwise, use
the search method to find a working code — see
“Using Manual Code Search” on Page 20.
6. Repeat Steps 2–5 to program other devices.
Note:
If the remote control does not operate all
device functions, try using another code in the list
that may be more compatible.
PROGRAMMING FAVORITE CHANNEL
SCAN
Once you have programmed channels into a favorite
channel table, you can scan up to ten favorite channels
for a desired device.
11
Preparation
Note:
Once you have programmed
SCAN/FAV
for Favorite Channel Scan, you cannot use it for Channel Scan
unless you reset it (see “Resetting Scan”).
1. Select
TV
or
CBL/SAT
for the favorite channel scan.
2. Hold down P until the red light blinks twice.
3. Press
9 9 6
to start the program.
4. Enter the two-, three- or four-digit number for your
favorite channel.
5.
If you entered less than four digits
, you must do one
of the following: if your original remote requires you
to press Enter or Select to send a command, then
do so after entering the digits of your favorite channel. If your original remote does not requi re you to
press Enter or Select to send a command, then after
entering your two- or three-digit channel number,
press
P
.
If you entered a four-digit channel number
, do not
press
P
.
6. Repeat Steps 4–5 up to nine more times to store
another favorite channel for the same device, or exit
the program by pressing
P
until the red light blinks
twice.
Note:
Upon entering the 10th channel, the remote
exits the Favorite Channel Programming mode.
Programming Favorite Channel Scan for a second device deletes the programming for the first.
Resetting Scan
Once you have programmed
SCAN/FAV
for Favorite
Channel Scan, you cannot use it for Channel Scan unless you reset it.
To reset
SCAN/FAV
, follow these steps.
1. Select either TV or
CBL/SAT
.
2. Hold down P until the red light blinks twice.
12
Preparation
3. Press
9 9 6
. You can now use the remote for Chan-
nel Scan (see “Using Channel Scan” on Page 17).
4. Hold down P until the red light blinks twice.
PROGRAMMING MACROS
Your remote has four macro keys (
MUSIC, MOVIES
,
SPORTS
, and
NEWS
) that you can use to store up to
three channels per macro key for instant tuning of TV or
cable/satellite channels. For example, if your favorite
sports channel on your cable service is 061, you can
store it as an instant tune-in macro.
Follow these steps to program macros.
1. Hold down
P
until the red light blinks twice.
2. Press
9 9 5
to start the program.
3. Press the desired macro key (
MUSIC, MOVIES
,
SPORTS
, or
NEWS
).
4. Press
CBL/SAT
or TV to select the appropriate
device.
5. Press the numbers for the desired channel (for
example, for the sports channel in the previous
example press
0 6 1
or
0 0 6 1
).
Note:
If your original remote control requires you to
press Enter or Select to send a command, press
Enter or Select after entering your three- or fourdigit channel number.
6. Hold down
P
until the red light blinks twice to save
the setting.
If you want to add two more channels to the macro keys,
repeat Steps 1–6 twice, each time substituting another
channel number in step 5.
Note:
You can only program three channels for each
macro key. Programming more than three channels will
overwrite one or more of your original channel settings.
13
Preparation
PROGRAMMING THE POWER KEY
Your remote can store a power on/off sequence to control the power of up to four devices with a single key
press. Once the desired sequence is stored,
POWER
acts as a master power key when held down for at least
2 seconds.
Follow these steps to program the power key.
1. Hold down
P
until the red light blinks twice.
2. Press
9 9 5
to start the program.
3. Press
POWER
to select the power key.
4. Press the device keys (TV,
VCR, CBL/SAT, DVD
, and
AUX
) in the desired order.
5. Hold down
P
until the red light blinks twice to accept
the program.
Resetting the Power Key
Follow these steps to reset the Power key to the default
settings (delete the master power setup):
1. Hold down
P
until red light blinks twice.
2. Press
9 9 5
.
3. Press
POWER
.
4. Hold down P until red light blinks twice.
REASSIGNING DEVICES
Although your remote is designed to control a TV, a
VCR, a cable converter (or SAT receiver), a DVD player
and an auxiliary device, you can reassign an unused device key (for example,
AUX
) to control another device,
such as a second VCR.
1. Hold down
P
until the red light blinks twice.
2. Press
9 9 2
to start the program.
14
Preparation
3. Press the device key for the device you are adding
(for example,
VCR
) then press the device key for the
unused key where the additional device will be
assigned (for example,
AUX
). The red light blinks
twice to accept the reassignment.
4. Set up the reassigned key to control your device
(see “Setting Up Your Remote” on Page 9).
Note:
Other reassignments are possible, including adding a second TV or second DVD player to an unused device key. Simply repeat Step 3 with your desired
choices.
Resetting Reassigned Device Keys
If you have reassigned a key (for example, you reassigned the DVD key to operate a second VCR), and
want to return to the default setting (for the example,
DVD mode), follow these steps.
1. Hold down
P
until red light blinks twice.
2. Enter
9 9 2
.
3. Press the desired mode key (the key you want reassigned to factory default settings) twice. The red
light blinks twice.
You can now set up codes for the original device.
PROGRAMMING LEARNING
You can program almost any key on your remote to
learn a function that is unique to your home entertainment devices (for example, Tracking Up or Down for a
VCR).
Note:
Please have your original remote controls handy
before beginning learning programming.
Important:
Be sure to press each key within 10 seconds
of the previous entry. If not, the remote control exits programming.
15
Preparation
Learning Functions
Do not use the following keys for learning: device keys,
P, SLEEP, SCAN, LIGHT, MUSIC, MOVIES, SPORTS
,
NEWS
, or
RECORD
.
Follow these steps to learn functions fro m other remotes.
1. Hold down P until the red light blinks twice.
2. Press
9 7 5
. The red light blinks twice.
3. Press the device key that corresponds with the
desired remote (TV,
VCR, CBL/SAT, DVD
, or
AUX
).
4. Press the key (on the 5-In-One Remote) selected to
learn the new feature. The red light blinks rapidly.
5. Place the device’s original remote control head-tohead (about 2 inches apart) with the 5-In-One
Remote.
6. On the original remote control, hold down the key to
be learned until the red light on the 5-in-One
Remote blinks twice.
If the red light does not blink twice, stop and repeat
Steps 1–5.
To learn functions on another key, repeat Steps 3–6.
To lock in new feature(s) on the 5-in-One Remote, hold
down
P
until the red light blinks twice.
To test a new feature, press the device key on the original remote control that was learned. Then press the key
on the 5-In-One Remote that learned the device’s feature.
Deleting a Learned Function
1. On the 5-In-One Remote, hold down P until the red
light blinks twice.
2. Press
9 7 6
. The red light blinks twice.
3. Press the device key that corresponds with the
device’s remote control from which the 5-In-One
16
Operation
learned the function (TV,
VCR, CBL/SAT, DVD
, or
AUX
).
4. Press the key for the learned function you want to
delete twice. The LED blinks twice after the second
press.
5. To clear additional functions stored on other keys,
repeat Steps 1–4.
ˆ
Operation
Note:
The command keys on the 5-In-One Remote work
the same as the keys on your original remote controls.
However, the labeling may be different.
USING THE REMOTE
Once you have completed programming your remote
(see “Preparation” on Page 8), you are ready to use your
5-In-One Remote.
1. Point the remote at the desired device and press the
device key (
TV, VCR, CBL/SAT, DVD
, or
AUX
). Then
press
POWER
to turn on the device.
2. Press the desired command keys.
3. Repeat Steps 1 and 2 for all other devices you want
to operate.
4.
To turn off the last device you selected
, press
POWER
.
To turn off another device
, press the device key,
then press
POWER
. Repeat this step to turn off all
devices.
Note:
You can program
POWER
as a master power key
to turn all devices on and off in a sequence. See “Programming the Power Key” on Page 13.
17
Operation
USING THE LIGHT
Your remote has a backlight so you can see the keys in
the dark. To turn on the light, press at the top right
of the remote.
When you press a key, the remote lights for a few seconds. To turn off the light, press again.
USING CHANNEL SCAN
Important:
If you have set up
SCAN/FAV
for Favorite
Channel Scan, you cannot use Channel Scan until yo u
have reset
SCAN/FAV
(see “Resetting Scan” on
Page 11).
If you want to view a sample of every channel on your
cable or SAT/DSS service, press
CBL/SAT
, then press
SCAN/FAV
. Starting with the current channel, the remote
control tunes to each channel in ascending order every
three seconds. Press any key to stop the scan.
Note:
For on-air broadcast scans, press
TV
, then press
SCAN/FAV
to start the scan.
USING FAVORITE CHANNEL SCAN
To scan favorite channels, you must first program the favorite channel table (see “Programming Favorite Channel Scan” on Page 10).
Press the desired device key (
TV
or
CBL/SAT
), then
press
SCAN/FAV
. The remote tunes to each favorite
channel in ascending order every three seconds. Press
any key to stop the scan.
USING MACROS
Press the desired macro key once for the first channel
you programmed (see “Programming Macros” on
Page 12), twice for the second channel, and so on.
USING THE POWER KEY
To turn on all devices, hold down
POWER
for at least 2
seconds. Each device turns on in the sequence you pro-
18
Operation
grammed (see “Programming the Power Key” on
Page 13).
To turn off all devices, hold down
POWER
for at least 2
seconds. You should see each device turn off in sequence.
Note:
If you do not hold down
POWER
for 2 seconds,
only the current device turns off. To turn off all devices,
you must hold down
POWER
.
CHANGING VOLUME LOCK
Your remote’s Volume Lock is preset so the volume and
mute keys only control the TV volume, no matter what
device is selected. If you want the remote to control the
TV’s volume only, skip this section and leave the original
settings intact.
However, if you want to control another device’s volume
functions (for example, CBL/SAT, VCR, DVD, or AUX)
upon its selection, then perform the steps listed in the
applicable section below.
Volume Unlock on a Cable Convertor or
SAT/DSS Receiver
1. Press
CBL/SAT
.
2. Hold down
P
until the red light blinks twice.
3. Press
9 9 3
.
4. Press
VOL–
. The red light blinks four times.
Volume Unlock on a VCR
1. Press
VCR
.
2. Hold down P until the red light blinks twice.
3. Press
9 9 3
.
4. Press
VOL–
. The red light blinks four times.
19
Operation
Volume Unlock on a DVD
1. Press
DVD
.
2. Hold down P until the red light blinks twice.
3. Press
9 9 3
.
4. Press
VOL–
. The red light blinks four times.
Volume Unlock on an Auxiliary Device
1. Press
AUX
.
2. Hold down
P
until the red light blinks twice.
3. Press
9 9 3
.
4. Press
VOL–
. The red light blinks four times.
Resetting Volume Lock to the Original
Settings
1. Hold down P until the red light blinks twice.
2. Press
9 9 3
.
3. Press TV. The red light blinks twice.
USING THE SLEEP TIMER
On a TV or CBL/SAT device, the Sleep Timer lets you
program the chosen device to turn itself off. You can set
the Sleep Timer in 15-minute increments, for up to 60
minutes.
Setting the Sleep Timer
1. Select a device for the sleep timer (TV or
CBL/SAT
).
2. Press
SLEEP
once to active the Sleep Timer for 15
minutes. The red light blinks once, and then continues to blink once every 15 seconds, to indicate that
the Sleep Timer is activated.
20
Operation
3. Press
SLEEP
again within 10 seconds to add
another 15 minutes to the sleep time. Repeat as
desired up to a maximum of 60 minutes.
4. To deactivate the Sleep Timer, press any key. The
red light stops blinking.
Locking/Unlocking the Sleep Timer
The 5-in-One Remote’s built-in sleep function can be enabled even if another device has a sleep device. Si mply
lock the Sleep Timer to ensure it functions.
1. Select a device for the sleep timer (
TV
or
CBL/SAT
).
2. Hold down
P
until the red light blinks twice.
3. Press
9 7 0
.
4. The red light blinks twice when the Sleep Timer is
locked. (If you are unlocking the Sleep Timer, the
red light blinks four times.)
USING MANUAL CODE SEARCH
If your home entertainment device does not respond to
remote control commands after trying all of the codes
listed for your brand, or if your brand is not listed, try
searching for your code.
Follow these steps to search for codes manually.
1. Turn on the desired device.
2. On the 5-In-One Remote, press the appropriate
device key once.
3. Hold down
P
until the red light blinks twice.
4. Press
9 9 1
. The red light blinks twice.
5. Aim the 5-In-One Remote at the desired device and
slowly alternate between pressing
POWER
and the
appropriate device key. Stop when the device turns
off — a code that works has been found.
Note:
In the search mode, the remote sends IR
codes from its extensive library to the selected
21
Operation
device, starting with the most popular codes.
Because of the library’s size, this procedure may
take some time. When the red light blinks three
times, the search of every code is complete.
6. Press
P
once to lock in the code.
Note:
If the device turns off during the search, but does
not operate after you lock in the code, begin the search
again, pausing longer between key presses.
Checking Your Code
If you set up the remote control using the manual code
search procedure, you can use the following instructions
to find out what code is operating your equipment:
1. On the remote control, press the desired device key
once.
2. Hold down
P
until the red light blinks twice.
3. Press
9 9 0
. The red light blinks twice.
4. To view the code for the first digit, press 1. Count the
number of blinks (for example, if there are three
blinks, the first digit is 3) and write down the number.
Note:
The red light will not blink if the code digit is a
“0”.
5. Repeat Step 4 three more times for each successive digit by pressing and releasing
2, 3
, and then 4.
22
Troubleshooting
ˆ
Troubleshooting
1. The P button is slightly recessed to avoid accidenta l
programming changes. You might need to use a
pointed device, such as a ballpoint pen, to apply
sufficient pressure.
2. If the remote control stops working after you have
successfully tested the control for each device, or if
you are unable to get the remote control to work at
all, do the following:
• Be sure you press the device key for the device you
want to control before you press any other key.
• Confirm that your IR devices are working properly
by using the original remote control or the manual
controls.
• Replace the batteries.
•
If you have any other problems, call customer service at
888-631-9859.
CARE
Keep the remote dry; if it gets wet, wipe it dry immediately. Use and store the remote only in normal temperature
environments. Handle the remote carefully; do not drop
it. Keep the remote away from dust and dirt, and wipe it
with a damp cloth occasionally to keep it looking new.
Modifying or tampering with the remote’s internal components can cause a malfunction and might invalidate its
warranty. If your remote is not performing as it should,
take it to your local RadioShack store for assistance.
23
Manufacturers’ Codes
ˆ
Manufacturers’ Codes
The following lists tell you which 4-digit co des to enter to
set up the 5-In-One Remote Learning Light-Up Remote.
Notes:
• The remote control might not have every command
featured on your original remote controls.
• Use the supplied label to record the manufactur ers’
codes for your remote-controlled devices.
• A key on the remote control that has the same
name as a key on your original remote control may
have a slightly different function.
Amplifier Codes
Brand Code
Aiwa 0406
Carver 0269
Curtis Mathes 0300
Denon 0160
JVC 0331
Linn 0269
Magnavox 0269
Marantz 0269
Optimus 0300, 0395, 0823
Panasonic 0308
Philips 0269
Pioneer 0013, 0300, 0823
Polk Audio 0269
RCA 0300
Realistic 0395, 0231
Technics 0308
Victor 0331
Wards 0013
24
Manufacturers’ Codes
Cable Codes
Yamaha 0354
Brand Code
ABC 0003, 0008
Allegro 0153, 0315
Antronix 0022, 0207
Archer 0153, 0022, 0207, 0797
Cabletenna 0022
Cableview 0022
Century 0153
Citizen 0153, 0315
Colour Voice 0025
Contec 0019
Emerson 0797
Everquest 0015
Focus 0400
GC Electronics 0207
Garrard 0153
Gemini 0015, 0797
General Instrument 0476, 0810
GoldStar 0144
Goodmind 0797
Jasco 0015, 0153, 0315
Jerrold 0003, 0012, 0476, 0015, 0810
Memorex 0000
Movie Time 0063
NSC 0063
Oak 0019
Optimus 0021
Panasonic 0000, 0021
Paragon 0000
Philips 0153, 0025
Brand Code
25
Manufacturers’ Codes
Home Automation Codes
Pioneer 0144, 0533, 0877
Popular Mechanics 0400
Pulsar 0000
Quasar 0000
RCA 0021
RadioShack 0015, 0303, 0315, 0797, 0883
Realistic 0207
Recoton 0400
Runco 0000
Samsung 0144
Scientific Atlanta 0008, 0477, 0877
Signal 0015
Sprucer 0021
Starcom 0003, 0015
Stargate 0015, 0797
Starquest 0015
TV86 0063
Tandy 0258
Tocom 0012
Toshiba 0000
Tusa 0015
Unika 0153, 0022, 0207
Universal 0153, 0022, 0207
Viewstar 0063, 0258
Zenith 0000, 0525
Zentek 0400
Brand Code
GE 0240
One For All 0167
RadioShack 0240
Security System 0167
Brand Code
26
Manufacturers’ Codes
Laser Disc Codes
Video Codes
Receiver Codes
Universal X10 0167
X10 0167
Brand Code
Denon 0059
Mitsubishi 0059
NAD 0059
Optimus 0059
Pioneer 0059
Brand Code
Archer 0160
GC Electronics 0160
Jebsee 0160
RadioShack 0160
Brand Code
ADC 0531
Aiwa 0158, 0189, 0121, 0405, 1089,
1405
Capetronic 0531, 0690
Carver 0189, 0042, 1089, 1189
Curtis Mathes 0080
Denon 0004, 1104, 1160
Fisher 0042, 0219
Garrard 0463, 0286, 0440, 0744
Hanwah 0741
Harman/Kardon 0110, 0189
JBL 0110
Brand Code
27
Manufacturers’ Codes
JVC 0074
Jensen 0754
Kenwood 0027, 0042, 1027, 1052, 1313,
1569
Koss 0744
LXI 0744
Linn 0189
MCS 0039
Magnavox 0531, 0189, 0364, 0391, 1089,
1189
Marantz 0039, 0189, 1089, 1189
NTDE Geniesom 0744
Onkyo 0135
Optimus 0531, 0670, 0080, 0042, 0219,
0229, 0286, 0440, 0622, 0690,
0738, 0744, 0754, 0797, 0801,
0849, 1023, 1074
Orient Power 0744
Panasonic 0039, 0309, 1518
Philips 0189, 0391, 1089, 1189
Pioneer 0531, 0014, 0150, 0630, 0080,
1023
Polk Audio 0189
Proscan 1254
Quasar 0039
RCA 0531, 1023, 1154, 1254
RadioShack 0744
Realistic 0534
Sansui 0189, 1089
Sanyo 0219, 0801
Schneider 0364
Sony 0158, 0415, 1042, 1058, 1158,
1258
Soundesign 0670
Sunfire 1052, 1313
Teac 0463
Brand Code
28
Manufacturers’ Codes
Satellite Codes
Technics 0039, 0309, 1308, 1309, 1518
Techwood 0364
Thorens 1189
Victor 0074
Wards 0158, 0014, 0189, 0080
Yamaha 0176, 1176
Zenith 0622, 0744
Brand Code
AlphaStar 0772
Echostar 0775, 0218, 0269, 1005
Expressvu 0775
General Instrument 0627, 0361, 0869
HTS 0775
Hitachi 0819
Hughes Network Sys-
tems
0749
JVC 0775
Jerrold 0627, 0361
Legend 0269
Magnavox 0724, 0722
Memorex 0724, 0269
Next Level 0869
Panasonic 0701
Philips 0724, 0722, 1076
Primestar 0627, 0361
RCA 0566, 0143, 0392, 0855
RadioShack 0869
Realistic 0052, 0051
Sony 0639
Star Choice 0869
Toshiba 0749, 0790
Brand Code
29
Manufacturers’ Codes
Television Codes
Uniden 0724, 0722, 0052
Zenith 0856
Brand Code
AOC 0030, 0019
Admiral 0093, 0463
Aiko 0092
Akai 0030
Alaron 0179
America Action 0180
Anam 0180
Audiovox 0451, 0180, 0092, 0623
Baysonic 0180
Belcor 0019
Bell & Howell 0154, 0016
Bradford 0180
Brockwood 0019
Broksonic 0236, 0463
CXC 0180
Candle 0030, 0056
Carnivale 0030
Carver 0054
Celebrity 0000
Cineral 0451, 0092
Citizen 0060, 0030, 0056, 0092
Concerto 0056
Contec 0180
Craig 0180
Crosley 0054
Crown 0180
Curtis Mathes 0047, 0054, 0154, 0051, 0451,
0093, 0060, 0030, 0145, 0056,
0016, 0166, 0747, 1147, 1347
Brand Code
30
Manufacturers’ Codes
Daewoo 0451, 0019, 0092, 0623, 0624
Daytron 0019
Denon 0145
Dumont 0017, 0019
Electroband 0000
Emerson 0154, 0236, 0463, 0180, 0178,
0019, 0179, 0623, 0624
Envision 0030
Fisher 0154
Fujitsu 0179
Funai 0180, 0179, 0171
Futuretech 0180
GE 0047, 0051, 0451, 0093, 0178,
0747, 1147, 1347
Gibralter 0017, 0030, 0019
GoldStar 0030, 0178, 0019, 0056
Gradiente 0053, 0056
Grunpy 0180, 0179
Hallmark 0178
Harley Davidson 0179
Harman/Kardon 0054
Harvard 0180
Hitachi 0145, 0056, 0016
Infinity 0054
Inteq 0017
JBL 0054
JCB 0000
JVC 0053
KEC 0180
KTV 0180, 0030
Kenwood 0030, 0019
LG 0056
LXI 0047, 0054, 0154, 0156, 0178,
0747
Logik 0016
Brand Code
31
Manufacturers’ Codes
Luxman 0056
MGA 0150, 0030, 0178, 0019
MTC 0060, 0030, 0019, 0056
Magnavox 0054, 0030, 0179, 1254
Majestic 0016
Marantz 0054, 0030
Matsushita 0250
Megatron 0178, 0145
Memorex 0154, 0250, 0463, 0150, 0178,
0179, 0056, 0016
Midland 0047, 0017, 0051, 0747
Mitsubishi 0093, 0150, 0178, 0019
Motorola 0093
Multitech 0180
NAD 0156, 0178, 0166
NEC 0030, 0019, 0056
NTC 0092
Nikko 0030, 0178, 0092
Onwa 0180
Optimus 0154, 0250, 0166
Optonica 0093, 0165
Orion 0236, 0463, 0179
Panasonic 0051, 0250
Penney 0047, 0156, 0051, 0060, 0030,
0178, 0019, 0056, 0747, 1347
Philco 0054, 0463, 0030, 0145, 0019
Philips 0054
Pilot 0030, 0019
Pioneer 0166
Portland 0019, 0092
Prism 0051
Proscan 0047, 0747
Proton 0178
Pulsar 0017, 0019
Brand Code
32
Manufacturers’ Codes
Quasar 0051, 0250, 0165
RCA 0047, 0051, 0093, 0019, 0747,
1047, 1147, 1247, 1347, 1447
RadioShack 0047, 0154, 0165, 0180, 0030,
0178, 0019, 0056, 0747
Realistic 0154, 0165, 0180, 0030, 0178,
0019, 0056
Runco 0017, 0030
SSS 0180, 0019
Sampo 0030
Samsung 0060, 0030, 0178, 0019, 0056
Sansei 0451
Sansui 0463
Sanyo 0154
Scimitsu 0019
Scotch 0178
Scott 0236, 0180, 0178, 0019, 0179
Sears 0047, 0054, 0154, 0156, 0178,
0179, 0056, 0171, 0747
Semivox 0180
Semp 0156
Sharp 0093, 0165
Shogun 0019
Signature 0016
Sony 0000
Soundesign 0180, 0178, 0179
Squareview 0171
Starlite 0180
Supreme 0000
Sylvania 0054, 0030
Symphonic 0171
TMK 0178, 0056
Tandy 0093
Technics 0051, 0250
Technol Ace 0179
Brand Code
33
Manufacturers’ Codes
VCR Codes
Techwood 0051, 0056
Teknika 0054, 0180, 0150, 0060, 0019,
0179, 0056, 0016, 0092
Telefunken 0056
Toshiba 0154, 0156, 0060, 1256
Vector Research 0030
Victor 0053
Vidikron 0054
Vidtech 0178, 0019
Wards 0054, 0165, 0030, 0178, 0019,
0179, 0056, 0016
White Westinghouse 0463, 0623, 0624
Yamaha 0030, 0019
Zenith 0017, 0463, 0016, 0092, 0624
Brand Code
Admiral 0048, 0209
Adventura 0000
Aiko 0278
Aiwa 0037, 0000, 0307
America Action 0278
American High 0035
Asha 0240
Audiovox 0037
Beaumark 0240
Bell & Howell 0104
Broksonic 0184, 0121, 0209, 0479
CCE 0072, 0278
Calix 0037
Canon 0035
Carver 0081
Cineral 0278
Citizen 0037, 0278
Brand Code
34
Manufacturers’ Codes
Colt 0072
Craig 0037, 0047, 0240, 0072, 0271
Curtis Mathes 0060, 0035, 0162
Cybernex 0240
Daewoo 0045, 0278
Denon 0042
Dynatech 0000
Electrohome 0037
Electrophonic 0037
Emerex 0032
Emerson 0037, 0184, 0000, 0121, 0043,
0209, 0278, 0479
Fisher 0047, 0104
Fuji 0035
Funai 0000
GE 0060, 0035, 0048, 0240, 0202
Garrard 0000
Go Video 0432
GoldStar 0037, 0480
Gradiente 0000
HI-Q 0047
Harley Davidson 0000
Harman/Kardon 0081
Harwood 0072
Headquarter 0046
Hitachi 0000, 0042
Hughes Network Sys-
tems
0042
JVC 0067
KEC 0037, 0278
KLH 0072
Kenwood 0067
Kodak 0035, 0037
LXI 0037
Lloyd's 0000
Brand Code
35
Manufacturers’ Codes
Logik 0072
MEI 0035
MGA 0240, 0043
MGN Technology 0240
MTC 0240, 0000
Magnasonic 0278, 0593
Magnavox 0035, 0039, 0081, 0000
Magnin 0240
Marantz 0035, 0081
Marta 0037
Matsushita 0035, 0162, 0454
Memorex 0035, 0037, 0048, 0039, 0047,
0240, 0000, 0104, 0209, 0162,
0046, 0268, 0299, 0307, 0454,
0479, 1037, 1162, 1262
Minolta 0042
Mitsubishi 0048, 0067, 0043
Motorola 0035, 0048
Multitech 0000, 0072
NEC 0104, 0067
Nikko 0037
Noblex 0240
Olympus 0035
Optimus 0037, 0048, 0104, 0162, 0432,
0454, 0568, 0593, 0619, 1048,
1062, 1162, 1262
Orion 0184, 0209, 0479
Panasonic 0035, 0162, 0454, 0616, 1062,
1162, 1262
Penney 0035, 0037, 0240, 0042
Pentax 0042
Philco 0035, 0209, 0479
Philips 0035, 0081, 0618, 1081, 1181
Pilot 0037
Pioneer 0067
Polk Audio 0081
Brand Code
36
Manufacturers’ Codes
Profitronic 0240
Proscan 0060, 0202
Protec 0072
Pulsar 0039
Quarter 0046
Quartz 0046
Quasar 0035, 0162, 0454, 1162
RCA 0060, 0035, 0048, 0240, 0042,
0202, 0619
RadioShack 0000, 1037
Radix 0037
Randex 0037
Realistic 0035, 0037, 0048, 0047, 0000,
0104, 0046
ReplayTV 0614, 0616
Runco 0039
STS 0042
Samsung 0240, 0045
Sanky 0048, 0039
Sansui 0000, 0067, 0209, 0271, 0479
Sanyo 0047, 0240, 0104, 0046, 0268
Scott 0184, 0045, 0121, 0043
Sears 0035, 0037, 0047, 0000, 0042,
0104, 0046
Semp 0045
Sharp 0048
Shintom 0072
Shogun 0240
Singer 0072
Sony 0035, 0032, 0000, 1032
Sylvania 0035, 0081, 0000, 0043
Symphonic 0000, 0593
TMK 0240
Teac 0000
Technics 0035, 0162
Brand Code
37
Manufacturers’ Codes
DVD Player Codes
Teknika 0035, 0037, 0000
Thomas 0000
Tivo 0618
Toshiba 0045, 0043
Totevision 0037, 0240
Unitech 0240
Vector 0045
Video Concepts 0045
Videosonic 0240
Wards 0060, 0035, 0048, 0047, 0081,
0240, 0000, 0042, 0072
White Westinghouse 0209, 0072, 0278
XR-1000 0035, 0000, 0072
Zenith 0039, 0000, 0209, 0479
Brand Code
Apex 0672
Denon 0490, 0634
Fisher 0670
GE 0522
Hitachi 0664
Hiteker 0672
JVC 0558, 0623
Kenwood 0534, 0682
Magnavox 0503, 0675
Marantz 0539
Mitsubishi 0521
Onkyo 0503
Optimus 0571
Panasonic 0490
Philips 0503, 0539
Pioneer 0525, 0571
Brand Code
38
Manufacturers’ Codes
TV-VCR Combo Codes
Proscan 0522
RCA 0522
Samsung 0573
Sharp 0630
Sony 0533
Technics 0490
Theta Digital 0571
Toshiba 0503
Yamaha 0490, 0545
Zenith 0503, 0591
Brand Code
Broksonic 0479 (TV:0463)
Citizen 0278
Colt 0072
Curtis Mathes 0035 (TV:0051)
Daewoo 0278 (TV:0624)
Emerson 0278 (TV:0624), 0479 (TV:0463)
Funai 0000
GE 0035 (TV:0051), 0048 (TV:0093),
0060 (TV:0047), 0240
GoldStar 0037 (TV:0056)
Harley Davidson 0000
Hitachi 0000
Lloyd’s 0000
Magnasonic 0278
Magnavox 0000, 0081 (TV:0054)
Magnin 0240
Memorex 0037, 0162 (TV:0250), 1037,
1162, 1262
MGA 0240
Mitsubishi 0048 (TV:0093)
Brand Code
39
Specifications
ˆ
Specifications
Power..............................................................(4) AAA Batteries
Dimensions (HWD) ................................. 8.4 in
×
2.5 in × 1.3 in
(214.5 mm × 64 mm × 33 mm)
Weight (Without Batteries) ................................................. 5 oz
(141.7 g)
Specifications are typical; individual units might vary. Specifications are subject to change and improvement without notice.
Optimus 0162 (TV:0250), 0593, 1162,
1262
Orion 0000, 0479 (TV:0463)
Panasonic 0035 (TV:0051), 0162 (TV:0250),
1162, 1262
Penney 0035 (TV:0051), 0037 (TV:0056),
0240
Quasar 0035 (TV:0051), 0162 (TV:0250)
RadioShack 1037
RCA 0035 (TV :0051), 0048 (TV :0093),
0060 (TV:0047), 0240
Sansui 0000, 0479 (TV:0463)
Sanyo 0240
Sears 0000, 0037 (TV:0056)
Sharp 0048 (TV:0093)
Sony 0000, 0032 (TV:0000)
Sylvania 0081 (TV:0054)
Symphonic 0000
Thomas 0000
White Westinghouse 0278 (TV:0624)
Zenith 0000
Brand Code
RadioShack Corporation
Fort Worth, Texas 76102
15-2103
12/01
Printed in Korea
Limited Ninety-Day Warranty
This product is warranted by RadioShack against manufacturing defects in material and workmanship under normal use for ninety (90)
days from the date of purchase from RadioShack company-owned
stores and authorized RadioShack franchisees and dealers. EXCEPT
AS PROVIDED HEREIN, RadioShack MAKES NO EXPRESS WARRANTIES AND ANY IMPLIED WARRANTIES, INCLUDING THOSE
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO THE DURATION OF THE
WRITTEN LIMITED WARRANTIES CONTAINED HEREIN. EXCEPT
AS PROVIDED HEREIN, RadioShack SHALL HAVE NO LIABILITY
OR RESPONSIBILITY TO CUSTOMER OR ANY OTHER PERSON
OR ENTITY WITH RESPECT TO ANY LIABILITY, LOSS OR DAMAGE CAUSED DIRECTLY OR INDIRECTLY BY USE OR PERFORMANCE OF THE PRODUCT OR ARISING OUT OF ANY BREACH
OF THIS WARRANTY, INCLUDING, BUT NOT LIMITED TO, ANY
DAMAGES RESULTING FROM INCONVENIENCE, LOSS OF TIME,
DATA, PROPERTY, REVENUE, OR PROFIT OR ANY INDIRECT,
SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, EVEN
IF RadioShack HAS BEEN ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES.
Some states do not allow limitations on how long an implied warranty
lasts or the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you.
In the event of a product defect during the warranty period, take the
product and the RadioShack sales receipt as proof of purchase date
to any RadioShack store. RadioShack will, at its option, unless otherwise provided by law: (a) correct the defect by product repair without
charge for parts and labor; (b) replace the product with one of the
same or similar design; or (c) refund the purchase price. All replaced
parts and products, and products on which a refund is made, become
the property of RadioShack. New or reconditioned parts and products
may be used in the performance of warranty service. Repaired or replaced parts and products are warranted for the remainder of the original warranty period. You will be charged for repair or replacement of
the product made after the expiration of the warranty period.
This warranty does not cover: (a) damage or failure caused by or attributable to acts of God, abuse, accident, misuse, improper or abnormal usage, failure to follow instructions, improper installation or
maintenance, alteration, lightning or ot her incid ence of excess voltage
or current; (b) any repairs other than those provided by a RadioShack
Authorized Service Facility; (c) consumables such as fuses or batteries; (d) cosmetic damage; (e) transportation, shipping or insurance
costs; or (f) costs of product removal, installation, set-up service adjustment or reinstallation.
This warranty gives you specific legal rights, and you may also have
other rights which vary from state to state.
RadioShack Customer Relations, 200 Taylor Street, 6th Floor, Fort
Worth, TX 76102
12/99
Loading...