Radio Shack 43-3576 User Manual

Using Your Phone

B P

Big Button Cordless Phone with Headset Jack

43-3576

Quick Start Guide

for installing, setting up and using your new product

Install and Charge the Handset Battery

1. Press down and slide off the battery cover.

2. Remove the battery pack and plug the battery pack’s connector into the socket in the battery compartment (fits only one way). Replace the battery pack and the cover.

3. Insert the AC adapter’s barrel plug into

DC IN 9V jack on the back of

4. Place the

the base’s the base, and route the excess cord through the strain relief slot. Plug the adapter into a wall outlet.

handset on the base and charge continuously for 15-20 hours before using the phone.

attery ack

Cover

Base

DC IN 9V

Jack

Connector

Socket

Strain Relief Slot

Connect to a Phone Line

When the handset battery pack is fully charged, plug the telephone cord into the of the base. Plug the other end into a telephone wall jack.

Wall

Jack

Note: The illustration shows the wall-mount bracket

attached. See page 9 of your Owner's Manual for how to attach and use the bracket.

Your phone is set for tone dialing. If your phone uses pulse service, please see “Choosing the Dialing Mode” on page 12 in your Owner’s Manual.

TEL LINE jack on the back

TEL LINE

Jack

Wall Bracket

Making Calls

Pick up the handset and press TALK. Listen for the dial tone, and then dial the number. Or, dial the number and then press TALK.

Answering Calls

If Auto Talk is on, just pick up the handset from the base. If Auto Talk is off, pick up the handset and press TALK. For more information, see “Setting Menu Options” on page 16 of your Owner’s Manual.

If the handset is off the base, press TALK, or, with Auto Talk on, press any number,

∗/TONE/f or #/g.