Radio Shack 12-521 User Manual

All-Hazards Desktop Weather Alert Radio
Quick Start Guide 12-521
Step 1: Power your radio
Insert the AC adapter to the DC 9V jack to power your radio.
Install 6 AA batteries (not included) for backup power.
2. Insert batteries as indicated by the polarity symbols (+ and –) inside.
3. Replace the battery cover.
DC 9V
Step 4: Set the radio
Step 2: Place the radio
Keyhole Slots
Place the radio on a flat surface where it receives alerts clearly. Avoid placing it near large obstructions or metal surfaces (such as a refrigerator).
Optionally, use the keyhole slots on the radio’s back to mount the radio on a wall.
Step 5: Receive alerts and understand indicators
Press WEATHER/SNOOZE to listen to the broadcast (see NWS Alert Descriptions“ on page 12 of the User’s Guide for a list of alert descriptions).
Step 3: Use the antenna
Telescoping Antenna
Fully extend the telescoping antenna.
For better reception, connect an external antenna to the EXT ANT jack using an optional adapter cable with a phono plug (not supplied).
Flip up or down to change the display’s angle
EXT ANT
During broadcasting, press or to adjust the volume.
Understanding the Alert Indicators
Alerts are indicated with differently colored LEDs: Red – WARNING
1. Press MENU to go to the menu mode.
2. Use , , , to select menu items and
change the settings; use SELECT to confirm each setting.
3. After setting, press MENU to exit.
©2008. RadioShack Corporation. All rights reserved. RadioShack and www.RadioShack.com are trademarks used by RadioShack Corporation.
Orange – WATCH Yellow – ADVISORY Green – READY
When an alert is in effect, the corresponding alert indicator flashes for 60 seconds and then lights for the duration the alert is in effect.
12A08 12-521
AO0338AAA1
Printed in China
Loading...