www.rabbit.com
ZigBee Core Module
RCM4510W RabbitCore®
MODELS | RCM4510 |
Key Features
• RabbitCore module running
@ 29.49 MHz
• On-board ZigBee/802.15.4
wireless connectivity
• 512K flash memory,
512K data SRAM
• Up to 40 general-purpose I/O
lines configurable
• Up to 9 additional general-purpose
I/O lines (up to four of which may
be set up as analog inputs) available
through the ZigBee modem
• Small size: 1.84” × 2.85” × 0.54”
(47 mm × 72 mm × 14 mm)
Design Advantages:
• Wireless mesh networking
• Low-Power
Applications
• Data Acquisition
• Point-of-Sale (POS)
• Building Automation
RCM4500W RabbitCore – The ZigBee is On-board
The RCM4500W series of next-generation RabbitCore modules
adds ZigBee™/802.15.4 connectivity to the existing Rabbit® 4000
microproces
sor
features allowing you to create a low-cost, low
power, wireless network as part of your control solution for your
embedded application.
The RCM4500W RabbitCore modules
are equipped with an on-board
ZigBee/ 802.15.4 modem for wireless
connectivity. Features also include
512K flash memory and SRAM, 40
general-purpose I/O, and up to 9
general-purpose I/O 4 of which can
be set up as analog inputs via the
ZigBee module.
At the heart of the RCM4510W is the
Rabbit 4000 microprocessor which features
a clock speed of up to 29.49 MHz. Other
features include hardware DMA, auxiliary
I/O, quadrature decoder, input capture,
GPIO lines shared with up to five serial
ports, and four levels of alternate pin
functions that include variable phase
PWM. The Rabbit 4000 boasts an additional
500+ new operational code instructions
that increases the processing efficiency,
from its predecessor the Rabbit 3000.
The RCM4500W RabbitCore modules
are easily interchangeable with other
RCM4xxx based products due to electrical
and functional compatibility. With a small
footprint of 1.84”x2.42” (47mm x 61mm),
Rabbit Semiconductor, Inc. 2900 Spa ord Street Davis, CA 95618 USA Tel 530.757.8400 Fax 530.757.8402
Copyright© 2007, Rabbit Semiconductor, Inc. All rights Reserved. Rabbit and RabbitCore are trademarks or registered trademarks of
Rabbit Semiconductor, Inc.. All other trademarks are the property of their respective owners.
the RCM4200 is compact and can easily
be mounted directly onto a user-designed
motherboard, along with CMOS-compatible
digital devices.
Developing with the RCM4500W
The RCM4500W Development Kit has the
essentials that you need to design your own
wireless microprocessor-based system. The kit
come complete with a RabbitCore module,
a prototyping board, accessory parts and all
development tools specifically designed to get
you up and running in minutes. Development
kits come with our industry-proven Dynamic C
integrated development software that includes
an editor, compiler, and in-circuit debugger.
Programming is easy with hundreds of
samples and libraries that can be used as
building blocks to your code.
Dynamic C Add-on Modules
Dynamic C Add-on modules provide added
functionality and customization to your
embedded applications. Software is available
via download or CD-ROM.
Secure Socket Layer
Industry standard web security
for embedded applications
RabbitWeb
Easily create web interfaces
to monitor and control
embedded applications
Advanced Encryption Standard
128-bit encryption for transfer of
sensitive data
Point-to-Point Protocol
TCP/IP functionality for serial and
PPPoE connections
µC/OS-II Real-Time Kernel
Real-time preemptive, prioritized
operating system
RCM4500W RabbitCore® Specifications
Features RCM4510W
Microprocessor Rabbit
®
4000 @ 29.49 MHz
Flash Memory 512K
Data SRAM 512K
Backup Battery Connection for user-supplied backup battery (to support RTC and data SRAM)
General Purpose I/O
Up to 49 parallel digital I/0 lines:
• up to 40 Rabbit 4000 pins configurable with four layers
of alternate functions
• up to 9 ZigBee™ modem pins, four of which may be
configured as analog inputs *
Additional Inputs Startup mode (2), reset in
Additional Outputs Status, reset out
Analog Inputs * 4 channels single-ended 0–1.2 V DC
• A/D Converter Resolution 10 bits
• A/D Conversion Time (including
raw count and Dynamic C)
40 ms
Auxiliary I/O Bus
Can be configured for 8 data lines and 6 address lines
(shared with parallel I/O lines), plus I/O read/write
Serial Ports
6 high-speed, CMOS-compatible ports:
• all 6 configurable as asynchronous (with IrDA),
• 4 as clocked serial (SPI), and 2 as SDLC/HDLC
• 1 asynchronous clocked serial port shared with
programming port
Serial Rate Maximum asynchronous baud rate = CLK/8
Slave Interface
Slave port allows the RCM4510W to be used as an intelligent
peripheral device slaved to a master processor
Real Time Clock Yes
Timers
Ten 8-bit timers (6 cascadable from the first), one 10-bit timer with 2 match
registers, and one 16-bit timer with 4 outputs and 8 set/reset registers
4 channels synchronized PWM with 10-bit counter
Watchdog/Supervisor Yes
Pulse-Width Modulators 4 channels variable-phase or synchronized PWM with 16-bit counter
Input Capture 2-channel input capture can be used to time input signals from various port pins
Quadrature Decoder
2-channel quadrature decoder accepts inputs
from external incremental encoder modules
Power with ZigBee™ Modem
(pins unloaded)
3.3 V.DC ±5%
150 mA @ 3.3 V while transmitting/receiving 80 mA @ 3.3 V
while not transmitting/receiving <20 μA @ 3.3 V while asleep
Operating Temperature -40°C to +85°C
Humidity 5% to 95%, non-condensing
Connectors
One 2 × 7, 2 mm pitch IDC signal header
One 2 × 25, 1.27 mm pitch IDC signal header
One 2 × 5, 1.27 mm pitch IDC programming header
Board Size with ZigBee™ Modem 1.84” × 2.85” × 0.54” (47 mm × 72 mm × 14 mm)
ZigBee™ Modem
RF Module MaxStream XBee™ Series 2
Compliance 802.15.4 standard (ZigBee™ compliant)
Pricing
Pricing (qty. 1/100)
Part Number
$89/$72
20-101-1170
Development Kit
Part Number
$299
U.S. 101-1188 Int’l 101-1189
Loading...