QUORION LK-T21, QPrint FM LK-T21 User Manual

User Manual

QPrint FM

2

Dear valued customer!

On behalf of our proud company we wish to welcome you to the QUORION family of fine business
machines. We sincerely hope you will appreciate the many benefits of being associated with a
distinguished product name that represents both quality and commitment to customer satisfaction

It is therefore with great pride that we look forward to continuing our close collaboration with our
customers.

Sincerely,

Your QUORION Team

3

Index

1. Safety Precautions .................................................................................. 4

2. General information ................................................................................. 5

2.1 Technical data ....................................................................................................................... 5

2.2 Components .......................................................................................................................... 6

2.3 Control panel ......................................................................................................................... 7

2.4 Function keys ........................................................................................................................ 7

2.5 Interfaces ............................................................................................................................... 7

3. Getting started ......................................................................................... 9

3.1 Unpacking .............................................................................................................................. 9

3.2 Loading the paper roll ........................................................................................................... 9

3.3 Self test ................................................................................................................................ 10

4. Application for countries with fiscal law .............................................. 11

4.1 Topology .............................................................................................................................. 11

4.2 Programming ....................................................................................................................... 11

4.3 Activation of the Fiscal Memory ......................................................................................... 11

4.4 Operation with QProg ......................................................................................................... 12

4.5 Operation with function keys ............................................................................................. 12

5. Information on the Electromagnetic Compatibility and Safety........... 14

4

1. Safety Precautions

This section presents important information intended to ensure safe and effective use of the QPrint
FM. Please read this section carefully and store it in an accessible location.

• Be sure the voltage of your main power net corresponds to the input voltage printed on the
rating plate of the system. Do not connect power adapters from other manufacturers. Use this
product only for its intended application. Improper usage may lead to equipment damage, fire,
or shock.

• Be sure your power cable meets the relevant safety standards and includes a power-system
ground terminal (PE terminal). Otherwise shock may result.

• Never attempt to stretch the cables to enable a connection. The power cable and DC cable
must have adequate slack at all times during use.

• Do not connect to electrical outlets close to devices that generate voltage fluctuations or
electrical noise. In particular, stay clear of devices that use large electric motors.

• Never insert or disconnect the power plug with wet hands. Doing so may result in severe
shock.

• Always connect the DC cable before plugging the power cable into the wall outlet.

• When disconnecting the DC cable, hold it firmly at the connector area. Do not tug on the cable

itself.

• Never attempt to repair this product yourself. Improper repair work can be dangerous.

• Never disassemble or modify this product. Tampering with this product may result in injury, fire,

or electric shock.

• Be sure to set this unit on a firm, stable, horizontal surface. Product may break or cause injury
if it falls.

• Keep the system away from all conditions, which may cause damage, fire or accidents: Direct
sunlight, high temperature and humidity, extreme changes in temperature, heating and cooling
equipment, or humidity, volatile materials, high levels of dust, vibration, and impact.

• Keep away any liquids from the system. If water or other liquid spills into the equipment, unplug
the power cable immediately, and then contact your dealer for advice. Continued usage may
lead to fire or shock.

• To prevent possible harm to the environment or human health please separate this product
from other waste streams to ensure that it can be recycled in an environmentally sound
manner. For more details on available collection facilities please contact your local dealer
where you purchased this product.

5

2. General information

2.1 Technical data

Technical Data of Printer:

Print principle: Thermal Printer Model „LK-T21“
Print width: 72mm
Paper width: 80mm
Print speed: 200mm/sec.
Sheet feeder: drop in
Life time: 100km
MCBF: 70 mill. lines
Cutter: Guillotine cutter
Max. Number o cuts: 1, 5 mills.

Technical Data of FM Electronic:

Processor: 32 bit ARM 966E
Type: STR912
Program memory: 1, 5 MB FLASH ROM
Operating memory: 600 KB SRAM
Data memory: up to 4 MB FLASH ROM
Electronic journal: SD-Card up to 1GByte
FM memory: especially protected flash 512kByte
Power supply: external power supply 24V/60W

Extern Interface of QPrint:

Port 1 (RS232) Communication with PC / extern Devices
Port 2 (RS232) (*1 Extern 2-Line-LCD Display (autom.scanned)
Port 3 (RS232) (*1 Extern Keyboard (autom.scanned)
Port 4 (RS232) Printer (intern/fix)
LAN 10/100 Mbit Communication with PC / Extern Devices
USB (*2 Communication with PC / Extern Devices
Direct keys 4 keys – Direct controlling (Front side)
Drawer Cash-Drawer (special Interface)
Power Power supply 24V/ 2, 5 A

Operating and Environmental Condition:

Safety character: CE, UL
Electrical security: EN 60 950
EMC: EN 55022 / EN 61000–3-2 / EN 55024
MTBF: > 5 years
Operating temperature: 5º – 45º C
Storage and transport temperature: -5º – 50º C
Noise level thermal printer: < 60 dB

Generally:

Application in the professional range: Working time > 8h/Tag
Reliability > 5 years
Process quality: According to DIN EN ISO 9001:2000

(*1 – Qprint scanned automatic Port 2, 3 with power on, sought after known external devices (display, keyboard, terminal) and used these. That is for
example the display can be connected with Port 2 or Port 3. When QPrint do not find such a device, QMP can used these ports (like the configuration).
(*2 – are used, when PC-Port is equal “16” (default is “1” – Port 1)