SHEET: 1 of 1
DWG. NO. BRDW1-4855
11441 Brittmoore Park Dr.
ANCHOR SCHEDULE
DRAWING DATE: 04/15/2013
Houston TX. 77041
DRAWN BY: BRIAN C.
NO SCALE
FSCM NO.
SIZE
REV
QUIKSERV CORP.
Aluminum Commercial Pass-Thru Window
QUIKSERV
BRDW1-4855 W/ QSB-12S INSTALLATION ANCHOR SCHEDULE
SEE ANCHOR
SCHEDULE CHART
THIS SHEET
(2) SCREWS ANCHORED IN PRE-DRILLED HOLES
SUBSTRATE
2
1/4" DIAMETER
# 14 WOOD SCREW
1/4" SHEET
CONCRETE SCREW
ANCHOR
CONCRETE
WOOD
STEEL
SUBSTRATE
ANCHOR SCHEDULE
BEYOND FULL ENGAGEMENT
(REQUIRES DOUBLE 2X BUCK)
1.50" INTO WOOD
1.25" INTO CONCRETE
MIN. PROTRUSION OF 3 THREADS
MINIUM PENETRATION INTO SUBSTRATE
( 16 GA. MIN.)
METAL SCREWS
BUCK
WITHOUT MOUNTING STRAP
SEE ANCHOR
SCHEDULE
THIS SHEET
NOTE:
ALUMINUM FRAMING IS
NOT BULLET RESISTANT RATED.
1
SEE ANCHOR
SCHEDULE CHART
THIS SHEET
(2) 10 X 32- 3/4" STAINLESS FLAT HEAT
PHILLIPS SCREWS AT EACH STRAP BRACKET
SUBSTRATE
1
USING MOUNTING STRAP
INSTALLATION INSTRUCTIONS
FIG. 1 MOUNTING INSTRUCTIONS USING MOUNTING STRAPS
INSTALL SCREWS IN ANCHOR BRACKETS THAT ARE PROVIDED
ON EACH SIDE JAMB. USE ANCHOR SCHEDULE TO DETERMINE
TYPE AND SIZE OF SCREWS.
FIG. 2 MOUNTING INSTRUCTIONS WITHOUT MOUNTING STRAPS.
INSTALL SCREWS IN THE PRE-DRILLED HOLES LOCATED IN (2)
PLACES ON EACH SIDE JAMB. USE ANCHOR SCHEDULETO
DETERMINE TYPE AND SIZE OF SCREWS.
NOTE: DO NOT DRILL OR ANCHOR ANY NEW HOLES IN LOCKSIDE JAMBS
OF ANY SELF CLOSING UNITS.
IF USING THE MOUNTING STRAPS FOR INSTALLATION YOU MAY PLUG
PRE-DRILLED HOLES BY INSTALLING PLUGS OR SCREWS TO COVER
HOLES.
FIG.
FIG.
ANCHOR STRAPS
OR PRE-DRILLED
HOLE LOCATIONS
USING PRE-DRILLED HOLES
Loading...