Service Manual
Bi-Parting Self Closing Slider
BPSC-4840
Bi-Parting Self Closing Slider
BPSC-4840
Click the Procedure to View
Operation and Maintenance Procedure 2
Door Is Not Closing 3
Door Adjustment 4
Slide Rail Adjustment 4
Door Guide Replacement 4
Door Closing Weight Assembly Replacement 5
Part List 6
Warranty Service Policy 7
Quikserv Corp.© quikserv.com • 1-800-388-8307 • Fax (713) 849-5708
1
Service Manual
BPSC-4840
Bi-Parting Self Closing Slider
Operation and Maintenance Procedures
Operation and Maintenance Procedures
Pre-Operation Procedures:
• Unlock all locking mechanisms and ensure
that the doors are free of obstructions.
General Cleaning Guidelines:
• All weather-stripping should be checked and
cleaned weekly.
• All glass, aluminum framing, and stainless
steel should be kept clean at all times. All
cleaning uids and applicators should be non-
abrasive.
General Maintenance:
• Slide rail should be kept clean of all dirt and
debris.
• Rails should be oiled with lightweight oil every
6 months.
• Hook lock & thumb turn should be cleaned of
all dirt and debris every 6 months.
To gain access to the internal components for each window the access panel
must be removed from the exterior of the
window - see arrows below.
To gain access to the internal components for
each window there are 2 access panels that may
need to be removed - see arrows below.
Please refer to the trouble shooting section for
additional information on the window adjustments
or service procedures.
Contact us at (800) 388-8307 for assistance or
for information on the nearest service center in
your area.
Quikserv Corp.© quikserv.com • 1-800-388-8307 • Fax (713) 849-5708
2
Trouble Probable Cause Probable Solution
1. Door dra
2. Unit installed out of s
uare Contact construction compan
3. Door obstructed Remove obstruction
4. Defective slide rail Re
lace or oil slide rail
5. Door
g
uide worn out See door guide replacement
ht cable broken Cable replacement
G
M
Z
DOOR
DOOR
SIDE JAMB
S/S BASE
DOOR
DOOR
H.
Service Manual
BPSC-4840
Bi-Parting Self Closing Slider
Quikserv Corp.© quikserv.com • 1-800-388-8307 • Fax (713) 849-5708
3