Quikserv BPS-5440 Installation Manual

IN A 1" PVC TUBE IN THE LEFT-HAND SIDE
JAMB-DRILL THRU CENTER WITH CAUTION

CAUTION: PUSH BAR CABLE IS LOCATED

TOP VIEW

( SUPPLIED BY OTHERS )

SUB-FRAME AND
=" WHEN NEEDED"=

SNAP-IN FACE

BY OTHERS

TO BE SUPPLIED

ANCHOR SCREWS

FIG. D

FIG. B

IN A 1" PVC TUBE IN THE RIGHT-HAND SIDE

JAMB-DRILL THRU CENTER WITH CAUTION

CAUTION: WEIGHT CABLE IS LOCATED

FINISH WALL

GLASS MUST

FROM

8"

EXTERIOR
WALL.

FINISHED

BY THE

OBSCURED

NOT BE

SASH AND

SIDE VIEW

Drawing Name: Scale:

Rev.Drawn By:

Quikserv Corp.

P.O. Box 40466
Houston TX 77240

1-800-388-8307
www.quikserv.com

Date:

BPS-5440 Installation Drawing

12/14/2009

BC

N/A

BPS-5440 Installation Drawing

Rough Opening:

Actual Dimension:

Service Opening:

NOTE:THIS DRAWING EMBODIES A CONFIDENTIAL PROPRIETY DESIGN ORIGINATED AND OWNED BY QUIKSERV CORP., AND IS SUBMITTED UNDER A CONFIDENTIAL

RELATIONSHIP. ALL PATENT, MANUFACTURING, SALE RIGHTS REGARDING THE SAME ARE RESERVED EXCEPT TO THE EXTENT RIGHTS ARE EXPRESSLY GRANTED TO

OTHERS. THE RECIPIENT AGREES BY ACCEPTING THESE DRAWINGS NOT TO SUPPLY OR DISCLOSE ANY INFORMATION REGARDING THEM TO ANY UNAUTHORIZED PERSON.

54" (W) X 40-1/2" (H)

53-1/2" (W) X 40" (H)

17-3/4" (W) X 31" (H)

BY CERTIFIED ENGINEER.

(SEE FIG. D)

LOCATED IN A 1" PVC TUBE IN RIGHT SIDE JAMB.

APPROX. 5" AT TOP & BOTTOM OF EACH JAMB.

3) ANCHOR THROUGH EACH SIDE JAMB AT TWO PLACES

8) ALL OTHER TYPE OF ANCHORING TO BE APPROVED

TO BE 36". (CHECK ANY AND ALL LOCAL OR CITY CODES)

6) RECOMMENDED HEIGHT FROM FLOOR TO SERVICE OPENING

5) CAUTION WHEN DRILLING -WEIGHT CABLE IS

2) ANCHOR SCREWS TO BE SUPPLIED BY CONTRACTOR.

SQUARE TO WORK PROPERLY.

1) QUIKSERV WINDOWS MUST BE INSTALLED LEVEL AND

TYPICAL

BPS-5440 INSTALLATION

7) SILICONE ALL EXTERIOR AND INTERIOR JOINTS.

4) CAUTION WHEN DRILLING-PUSH BAR CABLE IS
LOCATED IN A 1" PVC TUBE IN LEFT SIDE JAMB.

(SEE FIG. B)

(SEE FIG. A)