Quikserv BP-7236E-IP Installation Manual

FIG. B

CONTRACTOR)

(SUPPLIED BY

JUNCTION BOX

TOP VIEW

115V- POWER SUPPLY

PUSH BUTTON

BY OTHERS

TO BE SUPPLIED

ANCHOR SCREWS

CAUTION: POWER SUPPLY IS LOCATED

DRILL THRU CENTER WITH CAUTION

IN LEFT-HAND JAMB - PLEASE

CABLE

FIG. D

PUSH BUTTON

CABLE

FIG. A

110 Volt Power Source (Approximately 4')

Drawing Name: Scale:

Rev.Drawn By:

Quikserv Corp.

11441 Brittmoore Park Dr
Houston TX 77041

1-800-388-8307
www.quikserv.com

Date:

BP-7236E-IP Installation Drawing

9/13/2014

BC

N/A

BP-7236E-IP INSTALLATION DRAWING

Rough Opening:

Actual Dimension:

Service Opening:

NOTE:THIS DRAWING EMBODIES A CONFIDENTIAL PROPRIETY DESIGN ORIGINATED AND OWNED BY QUIKSERV CORP., AND IS SUBMITTED UNDER A CONFIDENTIAL

RELATIONSHIP. ALL PATENT, MANUFACTURING, SALE RIGHTS REGARDING THE SAME ARE RESERVED EXCEPT TO THE EXTENT RIGHTS ARE EXPRESSLY GRANTED TO

OTHERS. THE RECIPIENT AGREES BY ACCEPTING THESE DRAWINGS NOT TO SUPPLY OR DISCLOSE ANY INFORMATION REGARDING THEM TO ANY UNAUTHORIZED PERSON.

72-1/2" (W) X 36-1/2" (H)

72" (W) X 36" (H)

27-1/4" (W) X 24-3/4" (H)

BY CERTIFIED ENGINEER.

LOCATED IN RIGHT SIDE JAMB. (SEE FIG. B)

SCHEDULE.

3) ANCHOR PER FLORIDA BLDG. CODES ANCHOR

9) ALL OTHER TYPE OF ANCHORING TO BE APPROVED

TO BE 36". (CHECK ANY AND ALL LOCAL OR CITY CODES)

7) RECOMMENDED HEIGHT FROM FLOOR TO SERVICE OPENING

5) CAUTION WHEN DRILLING - PUSH BUTTON WIRE IS

2) ANCHOR SCREWS TO BE SUPPLIED BY CONTRACTOR.

SQUARE TO WORK PROPERLY.

1) QUIKSERV WINDOWS MUST BE INSTALLED LEVEL AND

TYPICAL

BP-7236E-IP

8) SILICONE ALL EXTERIOR AND INTERIOR JOINTS.

4) CAUTION WHEN DRILLING-115V POWER SUPPLY
WIRE LOCATED IN LEFT SIDE JAMB. (SEE FIG. A)

6) 115V/15AMP DEDICATED CIRCUIT REQUIRED.

INSTALLATION