DAT 160 SCSI and USB
Tape Drives
Contents
Tabletop and
Internal Tape Drive
Quick Start Guide
Important Information About
Your New Tape Drive
• Before installing the tape drive run the driver installer from the
CD-ROM.
• USB: Always connect to a USB 2.0 port (on a computer running
Windows or Linux).
• USB: The tape drive should be the only device on the USB hub.
• SCSI: Connect to an Ultra 160 SCSI HBA or higher
English..................................................... 1
French.............................................on CD
German...........................................on CD
Spanish...........................................on CD
Korean............................................on CD
Japanese .........................................on CD
Simplified Chinese .......................on CD
This quick start guide provides basic
installation instructions for your internal
or external Quantum DAT 160 Tape
Drive. For detailed instruction see the
Quantum DAT 160 Tape Drive User’s
Guide, p/n 81-81794-01 A01.
• SCSI: Use a SCSI cable and terminator
• For optimum performance use DAT 160 media cartridges
(MR-D6MQN-xx)
NOTE: The DAT 160 cartridge is larger than previous generations of
DAT cartridges.
Tabletop and Internal Tape Drive Quick Start Guide
Server
SCSI terminator
SCSI cable
Power cord
Power switch
Recommended SCSI connection:
Connect to the SCSI HBA or SCSI
connector on your server. Quantum
recommends Ultra 160 or higher.
DAT 160 SCSI External Tape Drive Installation
Tech Tip: For detailed, step-by-step installation instructions see the User Guide
found on the Quantum CD supplied with your tape drive. See
www.quantum.com/support
for detailed compatibility information.
SCSI Cable and
Terminator Power
Figure 1 Recommended
External SCSI Connection
Use the appropriate 68-pin, wide, VHD-to-HD SCSI cable and LVD terminator.
2
DAT 160 SCSI and USB Tape Drives
SCSI cable
Power cable
Server
Recommended SCSI connection:
Connect to a SCSI HBA or SCSI
connector on your server.
Quantum recommends Ultra
160 or higher.
DAT 160 SCSI Internal Tape Drive Installation
Caution: Disconnect your computer from the main power supply before installing
the tape drive and observe anti-static precautions.
Tech Tip: For detailed, step-by-step installation instructions see the User Guide
found on the Quantum CD supplied with your tape drive. See
www.quantum.com/support
for detailed compatibility information.
Mounting Hardware
SCSI Cable
Power Connection
Figure 2 Recommended
Internal SCSI Connection
Have the appropriate mounting hardware available. Refer to your server documentation.
Use a correctly rated and terminated cable.
Attach a spare power cable from the server's internal power supply.
DAT 160 SCSI Internal Tape Drive Installation 3
Tabletop and Internal Tape Drive Quick Start Guide
USB cable to
computer
Power cable
Power switch
Completing the SCSI Installation
Drivers
Install or Update Backup
Software
Drivers are available at www.quantum.com/support
Always upgrade your software application to ensure it works correctly with the tape
drive. The in-box software provides full support for all the features of your tape drive.
DAT 160 USB External Tape Drive Installation
Tech Tip: For detailed, step-by-step installation instructions see the User Guide
found on the Quantum CD supplied with your tape drive. See
www.quantum.com/support
Figure 3 Quantum DAT 160
USB External Tape Drive
for detailed compatibility information.
.
Windows Systems Only
Installing the Drive
Figure 4 Quantum DAT 160
USB External Tape Drive Back
View
4 Completing the SCSI Installation
Drivers are available at www.quantum.com/support
You must connect to a dedicated USB 2.0 port on your computer. USB 1.1 will severely
degrade performance.
Use an appropriate power cable to connect to the main power supply. The drive is not
powered from the USB bus (see figures 4
).
.
DAT 160 SCSI and USB Tape Drives
DAT 160 USB Internal Tape Drive Installation
Caution: Disconnect your computer from the main power supply before installing
the tape drive and observe anti-static precautions.
Use the appropriate power cable to connect to the computer's power supply. The drive is
not powered from the USB bus.
Tech Tip: For detailed, step-by-step installation instructions refer to the User Guide
found on the Quantum CD supplied with your tape drive. See
www.quantum.com/support
for detailed compatibility information.
Windows Systems Only:
Check Server Schematic
for Internal USB 2.0 Port.
Attach USB Cable to
Internal USB 2.0 Port
Run the driver installer from the CD-ROM before connecting tape drive.
You must connect to a dedicated USB 2.0 port on your computer. USB 1.1 will severely
degrade performance. Use the schematic on the inside of the door or consult your
computer documentation to locate the availability and position of a USB 2.0 port; this may
be a 4-pin motherboard connector or standard USB socket.
• Internal port available? Use appropriate cables, as appropriate (A)
• No internal port available? Use the Cable Routing Kit (B) to connect to an external
USB port.
There are two types of internal USB cables.
• 4-pin connector inside the computer:
You must provide the special 4-pin cable for connecting to a 4-pin USB connector
because there are two types of pin layout. Select the correct cable for your computer.
Sockets may be oriented horizontally or vertically (see figure 5
• Standard 5-pin USB port inside the computer
Use the appropriate cable with the tape drive, not illustrated.
).
Attach USB Cable to
External USB 2.0 Port
Use the appropriate USB cable and Cable Routing Kit (bracket with attached cable). Make
sure you orientate the bracket correctly when you fit it, (cable on the outside, Type A USB
socket on the inside).
DAT 160 USB Internal Tape Drive Installation 5
Tabletop and Internal Tape Drive Quick Start Guide
B
USB cable
Power cable
4-pin internal USB cable
(older-style pin layout)
Internal USB
2.0 port
External USB
2.0 port
To ta p e d r i v e
Type B
connector)
To s e r v e r ’ s
external USB
port (Type A
connector)
Bracket not supplied
Figure 5 Attaching an USB
Cable to an Internal USB 2.0
Port
Completing the USB Installation
Complete Installation of
Drivers
Install or Update Backup
Software
Found New Hardware Wizard runs, follow the on-screen instructions to automatically
If the
search for the installed drivers.
It is important to check www.quantum.com/support
install any recommended upgrades. The in-box software provides full support for all the
features of your tape drive.
Understanding the Front Panel LEDs
Figure 6 Front Panel LEDs
for software compatibility and
6 Completing the USB Installation
DAT 160 SCSI and USB Tape Drives
Table 1 Front Panel LEDs
Clean Amber Description
On Cleaning cartridge in use
Off Drive does not require cleaning
Flashing Drive Needs cleaning
Drive Green Description
Off No fault has been detected
Flashing Drive mechanism has detected a hardware error
Tape Green Description
Off No fault has been detected
Flashing
Cartridge currently in the drive is faulty (damaged or unsupported).
Discard the cartridge
Ready Green Description
On Drive is ready for use
Off Drive power is off, there was a failure during self-test, or a cartridge
is not present
Flashing Drive is busy
Understanding the Front Panel LEDs 7
Tabletop and Internal Tape Drive Quick Start Guide
For assistance contact Quantum Technical Assistance center:
North America +1-800-284-5101
UK, France, and Germany 00800 4 QUANTUM
EMEA +44 1256 848 766
For worldwide support: www.quantum.com/contactsupport
Backup. Recovery. Archive. It’s What We Do.
©2007 Quantum corporation. All rights reserved. Quantum, the Quantum logo, and all other
logos are registered trademarks of Quantum Corporation or their respective owners.
About Quantum
Quantum Corp. (NYSE: QTM) is the leading global storage company
specializing in backup, recovery and archive. Combining focused
expertise, customer-driven innovation, and platform independence,
Quantum provides a comprehensive range of disk, tape, media, and
software solutions supported by a world-class sales and service
organization. As a long-standing and trusted partner, the company works
closely with a broad network of resellers, OEMs, and other suppliers to
meet customer’s evolving data protection needs.
81-81795-01 A01
81-81795-01 A01 March 2007
Loading...