Quantum BIGFOOT CY DATASHEET
Bigfoot CY
bigfoot_cy_jumper.pdf
Jumper Settings
S tand Alone ON
M aster to Slave ON
S lave to Master OFF
Jumper Locations
The Bigfoot CY disk drive has only one location where user configurable jumpers are found. The
jumper block is incorporated into the IDE / ATA cable connector. Using the jumper pins you can
establish the drive Master/Slave configuration.
DS
CS
OFF
OFF
OFF
PK
OFF
OFF
OFF
Rsvd
OFF
OFF
OFF
BIOS Settings
The following BIOS parameters are provided for customers needing to manually configure the
Quantum disk drive. Both base 2 and base 10 capacity values are displayed.
1 of 1
Bigfoot CY
bigfoot_cy_jumper.pdf
2 .1 GB 4092
4 .3 GB 8960
6 .4 GB 13446
Special Considerations
Hard drives greater than 2.1GB may need to be divided into multiple partitions / logical drives. MSDOS versions 4.0 through 6.22 allow a maximum primary partition / logical drive size of 2.1GB and
are limited to 8.4GB in physical drive capacity. The file systems supported by Windows-95,
Windows-98 and Windows NT are not restricted to the 8.4GB physical drive limit, but special BIOS
upport is required. s
Cylinders
Heads
16
15
15
Sectors
63
63
63
Base 2 Capacity Base 10 Capacity
2,014 MB
4,134 MB
6,204 MB
2,111 MB
4,335 MB
6,505 MB
2 of 2
Loading...